I'm looking to automatically move data from my working worksheet, when a particular column states "Won" or "Lost". I'm hoping the entire row of data can be cut, and added to the appropriate sheet, determined by "Won" or "Lost".
View 5 RepliesI have created a spreadsheet for internal use in my workplace that logs task by members of staff, What I am trying to achieve is when someone selects from a drop down box that a task has been complete I want the task to automatically move to another worksheet for the relevant month, as I will have worksheets for every month logging all the past tasks that have been assigned. I believe an IF statement should do the trick, but I am having no luck so far.
View 2 Replies View RelatedIs it possible to create a cell in one sheet, where after data is entered, will move it to another sheet. Additionally, the data in the cell, after the transfer to another sheet is made would delete itself. Once the data is entered, sent to another sheet and deleted, next time data is entered into the same cell, it would be sent into a row below the cell that the first piece of data would be in. Therefore, after I enter data, [for example] press enter, then go back to input some more data, after a while there would be a long list in another sheet. The last feature of the problem (it would be something extra really) is that the function/macro is to be time dependent - during one month the data would stack up in one column, after the next one begins, the next column will automatically start all over.
The idea is to create a budget book - where on the main page I would only have to enter the value in a specific box, the value then would be automatically sorted into the right row and column in another sheet, after the month/week ends, data would start to stack up in a column devoted to a new month/week.
Of course the data could be entered manually in different sheets, but it proved to be too complex to be useful.
I have Excel 2003. I need a formula that will automatically move data in a row to another sheet, in the same workbook, based on either a two digit department code or possibly a date. I enter information on a master sheet, (8 columns of data: Text/$/digits) and I need that information to separate out to the other sheets when that department's two digit number is entered on this sheet. There are a total of 6 sheets in this workbook, counting the master. The data I am entering will be about 40-50 rows down of information, 8 columns across. Will this take a macro? Loop?
View 9 Replies View RelatedI want to make a spreadsheet that has codes that make items show up on another sheet but how to do this.
For example I would start on sheet 1 and on cell A2 I would type the amount $100. Then in cell B2 I would type in F (I will call this a code).
Now on sheet two I want the amount on cell A2 to show up in a column of items designated for F items. If I had typed in G instead I would have wanted it to go to a column for G items. All the values under the given code will show up in the column that is represented by them.
I need to transfer data from a table dynamically updated every 10 minutes to a table that never changes and maintains data, how can this be done using a macro?
View 1 Replies View RelatedI have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
How can I move data from one worksheet and place in another worksheet in the appropriate column? I exported data from Access to Excel in order but I need to group the data in excel.
View 3 Replies View RelatedI would like to move the current row of data to another sheet when I change a value in the row from an x to an s. I think I could use an If statement, but if you can move data from one worksheet to another, I don't know the syntax to use.
View 9 Replies View RelatedI need a code that will allow me to move data from a worksheet to a worksheet from which I came from. e.g. worksheet "Sheet 6" opens "Sheet 10", then after filling data in "Sheet 10" I need to move this data back to "Sheet 6" in the cells in range "F12 to F56". Please note that the data in "Sheet 10" is in the same range as in "Sheet 6"
View 1 Replies View RelatedI need to do is move a list of data in an excel worksheet to Notepad. The data is 16 numbers long, but the Notepad needs to be left justified to 19 characters. I can't figure out a way to move spaces over to notepad.
View 6 Replies View RelatedError in the code, where I'm trying to copy the data (based on criteria) from one worksheet to another, then delete the data from the first worksheet. In the code (I have complied from this message board) I get an 1004 error "Application-defined or Object-defined error".
Code:
Option Explicit
Sub CopyALColKYes()
Dim NR As Long, c As Range, firstaddress As String
Application.ScreenUpdating = False
NR = Sheets("Completed-Expired").Cells(Rows.Count, 13).End(xlUp).Row + 1
[Code] .........
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
I am trying to find a macro that will filter on Column F (non-blanks - just cells with dates) cut just the filtered data (A:G inclusive)without the Header Rows and then paste/move this data to the first empty row on another sheet called "Complete"
So that I get the cells in columns A:G with dates in moved to the "Complete" tab and they are no longer in the sheet "Deliverables"
I have a formula sheet that uses an IF statement to determine if one columns data is bigger than another. Out of the 300 or so rows there are approx 20 that come back as yes (this is in column A) and the rest are blank
What I would like to do, is for the 20 or so rows, I would like to pull out (copy) columns B, J and L and put them into worksheet 2. Preferably without any gaps in the rows or columns.
I hope this is enough information, I am using MS excel version 2010 although I think the people who will ultimately be using it are on an earlier version.
I have a excel file with two tabs, one with raw data, with data ordered by geographic region.
I have another blank tab, where I've created a dropdown list of the geographic regions.
How do I move all the data from worksheet to the other based on that geographic region?
situation: 3 rows of data, row 1 has HDR in several cells (always in A1).
task
1. search row one for next example of cell containing HDR, excluding cell A1.
2. IF found, create a new worksheet and move all data below and/or to the right of that cell to the new sheet.
3. Repeat steps two and three until the search does not turn up another HDR except in A1.
What i am trying to do:
*i have about 2000 rows.
*start from first row
*for each row that contains .pdf in one cell, i want another cell in that row to equal .dir
*hyperlink cell if cell contains dir
*move onto next cell (for all approx 2000 cells)
The problem:
*it is hyperlinking every cell even if the other cell doesn't contain .pdf.
*i think it is looking at the first row and if the cell has .pdf it applies it too all cells
What I want to do:
*select entire row of first row (21)
*if col 21 = .pdf then col 23 = .dir
*of col 23 = dir hyperlink .dir to fname value
*move onto next row (22)....do the same....and so on and so on all the way to row 2039
The code I am using:
Private Sub UserForm_activate()
'Unprotect Workbook
ThisWorkbook.Worksheets("Cover Page").Unprotect Password:="password"
ThisWorkbook.Worksheets("D - Documentation").Unprotect Password:="password"
ThisWorkbook.Worksheets("E - Electrical").Unprotect Password:="password"
ThisWorkbook.Worksheets("F - Process Flow & P&ID").Unprotect Password:="password"
[Code] .......
I have written the below code (as part of a larger code set) to copy a range and paste it in cell Z4 if Z4 is empty. If it isn't empty, I want it to move one cell to the right and paste it in AA4. This should be a loop pasting one cell to the right of the last filled cell.
I have come up with the following which moves one cell to the right, but only once. It doesn't loop. Also, this loop operates within a larger loop.
Range("z4").Select
If Range("z4") = "" Then
ActiveSheet.Paste
Application.CutCopyMode = False
Else
i = 1
Range("z4").Offset(0, i).Select
i = i + 1
ActiveSheet.Paste
Application.CutCopyMode = False
End If
I have a workbook, in which I will have approximately 5 worksheets. The 1st worksheet will be a summary table, which will pull data from the other 4 worksheets. These 4 sheets have data of 4 companies, thus representing 4 companies. In the 1st worksheet, I have a drop-down list that has selections for each company.
How do I make it so that when I change the selection from A company to B company, the data in the summary table will automatically pull data from corresponding worksheet? For example, if 2nd worksheet represents Apple Inc, the 3rd represents Microsoft, how do I reference from 2nd to 3rd worksheet automatically when I change my selection from Apple Inc to Microsoft in the 1st summary table sheet?
We use work order worksheets in excel with basic information: Date in, work order #, account, date out, total # of days, work conducted by, number of samples, description of sample, etc. Each work order has an individual worksheet. The information in these worksheets eventually get entered into a work order log containing the same information in order to compile a quarterly report. We might have 400 work orders in a quarter.
My question is: How do I link the individual worksheet to the work order log in order to get the data to transfer automatically when a new work order is entered into a worksheet? I'm able to get the first work order to link to the log worksheet, but CAN NOT figure out how to get subsequent work orders to enter into the following rows, rather than just replace the first row over and over.
I have 2 worksheets that share some of the same data. However I do not want to have to populate the same information twice. Instead I want to be able to type the information required in the one worksheet and create an instruction for the data that overlaps with the second worksheet to automatically load. The catch is I need it to find the next blank row every time to add the data. EG
Worksheet 1 has columns: Name, ID Number, Date, Gender
Worksheet 2 has columns Name ID Number.
I want to be able to input data on worksheet 1 only and the the Name and ID number will be added to the relevant columns in worksheet 2.
Is it possible to automatically copy or load data from one excel spread sheet into another excel sheet? Could this be done with a macro?
View 14 Replies View Relatedi have a set of data in excel. i want that all the data in excel active worksheet shall be automatically transferred to ms word when i click a command button...
View 9 Replies View RelatedI have two sheets and need information from Sheet titled Add-Del_chng positions to be moved to the sheet titled Cost Distribution.The issues here are :
1. The values in Cells A through J should be moved only if col Z value is 'hard coded"
2. The values should be moved to the 13th row.
3. This should happen every time the value is input into col Z of sheet titled add_del_chng.
Currently the macro does not run unless I go into the code and press play. I need this to happen automatically.
I have a command button that I want to automatically copy and paste certain data to another worksheet when clicked. I keep getting a "runtime error 1004; application-defined or object-defined error". The code I have so far is:
View 5 Replies View RelatedNeed to write the VBA code required to automatically add the names of the buyers & sellers as the auction info is entered on the Auction worksheet to the Transactions worksheet of the same workbook? Any member name should only appear once as this will be the list whereby we will generate the receipts by Location order when auction is finished.
View 8 Replies View RelatedI have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.
View 9 Replies View RelatedI need VBA code to automatically send an email notification when data is added to worksheet. I am not very familiar with writing code and have been using other code from other posts. Ideally I would like it to send an email notification with the added information attached, in this case it would be Row # and Columns A thru O.
View 1 Replies View RelatedI want to do is use a userform to automatically create a graph from the data that is shown in the worksheet. The data in the work sheet will grow and shrink all the time. Am i right in thinking I am meant to create a dynamic range? I know how to do it but am not too sure what I am meant to be naming. And secondly I am not too sure how I set up the button to produce the graph.
View 4 Replies View Related