Macro To Pull Certain Cells
Mar 19, 2007
Need to create a macro that pulls certain data of a certain varying limit to different sheets, e.g. I have a sheet titled 'Data Dump' which contains lots of information specific to certain models of a product. I would like two other worksheets, one called '1' and another called '2' to pull the following information:
Worksheet 1 should pull data in columns A, B and I (in data dump) based on whether column H in Data Dump is = 1 to the total of 100 (i.e. 100 rows of information. (here an if statement would pull 100 and include empty rows, I do not want empty rows). Worksheet 2 should pull data in columns A, B and I based on whether Column H in Data Dump is = 2 to the total of 50 (i.e. 50 rows of information.
View 2 Replies
ADVERTISEMENT
Apr 23, 2014
I was messing around with some Macros, as an issue came up where clients were pasting over Data Validated cells (thus removing the validation). Somehow though, the feature where you can select a cell, then pull the active cell down through the column (and then can copy, fill series, etc)has become disabled. I deleted all the macros, and turned them off in the Trust Center, but when I click on a cell the box and plus sign still won't display for me to pull the cell down the column.
View 2 Replies
View Related
Jan 7, 2010
I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
View 2 Replies
View Related
Mar 18, 2008
I have code I am writing where each cell contains 1 of 2 words in in various places of that cell all within column E. I need something to state: If E3 contains "apple" then write "A" in the cell. If E3 contains "Orange" then write "O".
View 2 Replies
View Related
Dec 9, 2009
I am trying to put together a macro to pull data from one tab to another. The key here is that I want it to take the entire row.
Basically it will look something like this:
As someone goes down the rows of the checklist putting x's in the boxes that need one (there is a column set aside for that), that box will turn red.
That part is easy and done.
What I cant figure out how to do next is to automatically have a copy made of the row with the red cell and send them to another document.
View 13 Replies
View Related
Oct 18, 2004
I want to create a macro that will automatically pull data from the web by simply pressing a macro button. I assume that this would be an easy task if the data is from a website with a specific URL such as [URL]
However, there are times when someone must enter data into the web to pull a specific report that does not have a unique URL. Is there anyway to create data fields in excel that would allow an individual to type in specific information (name, report period, etc.), and then press a macro button that would go out to the web, enter the information automatically, and export it as an excel file. I realize that this is probably substatially more difficult than my first question.
View 9 Replies
View Related
Jan 4, 2013
1st Quarter Goal23306.67%
2nd Quarter Goal00.00%
3rd Quarter Goal00.00%
4th Quarter Goal00.00%
The 306% cell has (B2+B3+B4)/7.5 in it to get that value. I need to dump any access percentage above 100% into the next quarters goal. so 2nd should be 100 and 3rd should be 100 and 4th should be 6.67.
View 8 Replies
View Related
Jul 31, 2009
I am working on a spreadsheet in Excel '07 that will pull data from online and reformat it in a way that another program can digest. The last thing I need is for excel to recognize if there is a 6 digit number in a specific column.
This is tricky for two reasons:
1. Numbers come in three different formats, ### ###, ######, and ###.###
2. Sometimes there is also text within the cell, however I need to pull out just the 6 digits, and place them in another cell with format ### ###
View 10 Replies
View Related
Nov 29, 2011
I Have a workbook which consists of 50 worksheets and i use Edit query window to pull the data from oracle on all these sheets. We run this once in a month. I have to go to every sheet and execute this code which is time consuming and i have to change the date value everytime. macro that can execute this process at once and we should give the date only once.I use OLEDB driver to connect to oracle.
Attached is the Command line code.
Select protocol, patient, Page, (date_indexed) Indexed,(first_entry_date) FirstPass,( second_entry_date) SecondPass,trim( modified_date) modified, trim(CRF_ERROR_COMMENT) Comments from JJA38377_96_crf where date_indexed>='1-May-11' and date_indexed
View 2 Replies
View Related
May 25, 2012
macro listed below. Currenlty the macro pulls the last 12 months as long as the data that is pulled is current. However, if the data is 2 months old for example, it only pulls 10 months instead of 12. modify this macro so that it alway pulls the last 12 months. I'm assuming that the minimum date would have to be found first and then go backwards from there?
Code:
Dim PI As PivotItem
Dim d As Date
Dim Twelve As Date
[Code].....
View 6 Replies
View Related
Mar 15, 2013
I'm trying to create a macro that I can assign to a clip art pic that will pop up the Insert Hyperlink prompt when I click on the picture. So basically anytime I click on the pic for the 1st time I'd like to be able enter the url address of my choosing but if I were to click on that pic again I want it to go to the Hyperlink address I previously entered.
I should note that I tried recording a macro by first by clicking on Record Macro then press ctrl + k and then click Stop Recording but it wouldn't stop recording. I had to first click Cancel on the Insert Hyperlink prompt and then I was able to Stop Recording so this attempt was unsuccessful.
View 2 Replies
View Related
Oct 26, 2012
I have Put 15 Digit Number 234567890123456 in Cell A1. I am trying to get each Digit Seperately into Single Cell from B1 to P1.
View 5 Replies
View Related
Apr 23, 2014
I am trying to have my spreadsheet pull data from one tab and cell if they match another.
Tab "Ag Orders" column H, I enter data in lets say cell H37. Whatever I enter, if it matches tab "reference List" C:C, then "ag orders" column G (specifically G37) should enter the data in "reference List" D:D
So since in H37 I entered 34000 - 314620, G37 should pull in Farm Operations since on the referene list tab that string of numbers (C11 matches up with D11)
a little confusing but I hope it makes sense.
13-14 budget-AG.xlsm
This isn't the exact formula I used but something like it and it wasn't working. It wouldn't match the data up correctly on a few of the department names
=IFERROR(LOOKUP(H35,("11000 - 311010","11000 - 311020","11000 - 311510","11000 - 311610","11000 - 312010","17800 - 311010","17800 - 311510","17800 - 312010","34000 - 314610","34000 - 314620","34000 - 314640","34000 - 314660","34000 - 314680","34000 - 314690","81008 - 840008","81009 - 840009","13863 - 312040","13864 - 312050","71060 - 521620"),
[Code] ..........
View 1 Replies
View Related
Jul 14, 2007
I have a sheet with 200 sheets in called workbook x , I need to create a summary new workbook with only data on 1 sheet.
I want to pull specific cells from the large workbook x to 1 single sheet on a summary workbook:
A6 I want to be surname taken from B1 of workbook x
B6 will be first name taken from C1 of workbook x
Then I will copy data from M1 on mastersheet to cell C6 on new workbook
Then I want to copy Row A11 up to T11 and paste on the new workbook (Summary) in D6 staying in the row 6
Not sure if this is the tricky bit I want to repeat as above B11 to T11 but paste in the next empty cell of the same row of D in my summary
I need to repeat this action upto A23 to T23
Then I need it to move on to the next sheet in X and repeat all the steps above but do it on the next row down row 7 and so on
View 9 Replies
View Related
Aug 21, 2008
Attached is the sample file.
Basically I have a number in column A, just wondering is that any faster to allocate the number into individual cell as shown in the attached file.
View 5 Replies
View Related
Mar 12, 2014
My workbook has several worksheets so do you need the name of those to be excluded? Or how many sheets i require which are located to the right of the summary tab?
Detail - 5 sheets to the left of summary tab are to be ingored, 7 to the right of the summary are to be pulled (let's say they're named Red, Green, Blue). I only want the colour named tab data pulled and pasted into the summary
Code is below :
Sub karryan()
Dim i As Long
For i = 1 To 3
Sheets(i).UsedRange.offset(1).Copy Sheets("Summary").Range("A" & Rows.count).End(3)(2)
Next i
End Sub
View 1 Replies
View Related
Jul 10, 2014
I have a bunch of different worksheets that I need to pull a single cell from (lets say A1). On my summary sheet (first sheet) I have a list of all the worksheet names. Is there a macro that can pull data by referencing their names in the summary sheet.
Example: Column A has a list of all the worksheet names in my workbook. I want to extract cell A1 from each worksheet based off the name in Column A and be put into Column B. Otherwise, you would have to go through each tab and link it (I am working with 100+ tabs).
Column A Column B
PIN
CID
SIP
View 9 Replies
View Related
Mar 4, 2007
I need to pull out data from a word file(can open in excel 2003) which has several different rows with data in a certain format each time.
I want to take the data from sheet #1 in the format
________
where the underline always equals an 8 digit number that directly follows that unique text(no spaces)
and pull out all the 8 digit numbers from the sheet and put them into sheet #2 that my macro creates.
Also the additional rub is that I need to pull only the unique 8 digit numbers as there will be several repeats.
View 9 Replies
View Related
Sep 12, 2013
Formula to pull the lowest number that falls in Cells I2:L2 and the number must be 0 or Greater. Some of the numbers might be negatives and I am trying not to pull those numbers.
View 3 Replies
View Related
Jul 17, 2006
When selecting from a list of text items in a pull down menu in a cell how can you link that change to other cells to effect a change in them. An example would be if the pull down menu was in cell A1 and as a result of the text selected to be shown in A1 resulted in a need for the text in C3 to be changed as well as the formula in cell D3 to be change which will result in a numeric answer in cell D3. Not all of the choices in cell A1 will require that the text and formula be change in cell C3 and D3.
View 3 Replies
View Related
Jun 10, 2008
What formula or function truncates a text field that is in the following consistent format:
number. name
ie. 3. Super Bella
and 150. Taoist
I wish to truncate the field so I have just the integer without the dot, space or word(s).
Tried Len, Left & Replace but they require a specific number of characters. Since the number can be 1 to 3 digits long, this doesn't work.
View 3 Replies
View Related
Jul 6, 2014
I'm trying to compile a spread sheet that will pull the play by play logs from the NHL website.
The logs are listed in order.
Game 1 is [URL]... Game 2 is [URL]... etc etc
I am trying to put them all on one spreadsheet. (or to do it in batches of 100, or 50 or whatever the size of the file allows)
View 1 Replies
View Related
Jun 15, 2012
I have an excel 2010 spreadsheet that lists all of our vendors and the amount we spent with them over the last year.
I want to know how many of them were local vendors.
I have a list of all the zip codes within a 100 mile radius (there are about 500 zip codes). I would like to write a macro or sort function that searches the entire vendor list and only reports back those vendors that are included in the zip codes I specify.
The columns are as follows:
A B C D E
Vendor City StateZip CodeTotal AP
Vendor 1TROY AL36082527.37
Vendor 2PHOENIXAZ85054100
Vendor 3TUCSONAZ8571416255
I want to keep the all the columns, I just want to eliminate all of the vendors that do not fall within the zip code criteria I set.
View 5 Replies
View Related
May 10, 2013
I am trying to do is write a macro that will pull two tabs labeled "XXXXMarch" "XXXXPTD" (the x's represent numbers) from each file within a designated folder and copy them into a master file.
View 2 Replies
View Related
Dec 13, 2013
What I want to do is pull data from columns A,B,C,D in 3 other closed workbooks (export.csv, export1.csv, & export2.csv) to my main workbook (Thunder.xlsm)and append that data in columns A-D on my main workbook. In addition I created a list of 10 names (but need to expand or delete from this list as personnel change) in Column O that I would like to filter the data in A-D. The names in the list must find the data I want to keep in column D, the rest I want to delete (not the entire row, just A-D for that particular row that does not match the criteria in column O, and shift those cells up).
I've attached a sample spreadsheet that will clarify what I am asking. I'm preferably asking for 2 macro's, one for the pull of data, and the other for the filtering.
Column A
Column B
Column C
Column D
[Code]....
View 1 Replies
View Related
Jun 29, 2007
What I am looking to do is create a Dos.bat file to be run in the middle of the night that opens Excel. From there I will need Excel to open a .txt file from a specific folder, format the file, then re-save as an .xls file.
Each of the .txt files in the specific folder is named like the following:
BCKLOG_062807
BCKLOG_062707
and a new file is being generated to the folder each night (with the new date in the filename).
Is there a way I can use the macro to loop through only the new files being placed in the folder, since the old files will already have their .xls counterpart saved ???
If this is not a clear enough description, please let me know and I will attempt to explain better.
View 3 Replies
View Related
May 2, 2008
I need a macro which collects data from two files and dumps it into a separate spreadsheet. I need it to prompt the user to select the two files, since the file names may change.
Once a user selects the files, the macro simply opens them, grabs the data (the data sits on a single sheet in each file) and pastes it into a file, and closes the 2 data files.
The Data sits in A7:N20 on both files.
View 14 Replies
View Related
Nov 1, 2013
I am trying to create a Macro to pull from a list and then update the charts and print. I have a list that has over 100 clients. I believe I need to loop but I am not familiar with VBAs at all. Below is what I am trying to accomplish.
Sub Update()
'
' Update Macro
'
'
Selection.Copy
ActiveSheet.Next.Select
Range("B2").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Calculate
[Code] ......
View 3 Replies
View Related
Jul 11, 2014
Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
View 1 Replies
View Related
Aug 31, 2012
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
View 1 Replies
View Related
