I have a workbook that was opened with a Word macro but was mistakenly not made visible. I didnot realize the workbook was open because I didn't see it. I tried to open it manually and found that it was locked for editing because it was already open due to the Word macro opening it. How do I close it?
View 4 RepliesI have a boolean toggle for disabling and enabling a Workbook_Change event.
Right I invoke macros to turn the Workbook_Change event on and off and I don't know what state it's in.
Two Questions:
1) (required) I would love to be able to visually know if it's enabled no matter which sheet I am on
2) (bonus) Be able to change the state with a persistent interface (e.g. perhaps the Ribbon?) no matter which sheet I am on.
Is it possible to have those small drop-down boxes that appear when typing in the function parameters (using Enum), to also appear with ParamArray parameters as well?
View 2 Replies View RelatedI would like to loop through my workbook and distinguish (somehow) all of the cells that are named. I would like to do something to them so that I can easily glance through my workbook and find all ranges that aren't named. My biggest problem is that I would like whatever distinguishing I do to be reversable. Therefore, I can't just make all of the backgrounds of named ranges bright yellow, because then I would lose the original background color of my cells (they aren't all white).
The best option that I have thought of so far is inverting the fill color of each cell (this would be reversible). However, I'm not sure how to invert colors.
By the way, if the named ranges could be distinguished in some other way than by using background color, that would be fine too, as long as the changes are reversible.
I am trying to create a daily task activity sheet. I would like to know, how to make the columns visible and invisible as per the selection from previous column.
For eg:
Column A has a list which has values 'TC creation' , 'TC modification', 'System Test' etc.
Upon selecting TC creation, i need to make a column visible ie 'total tcs created'.
Upon selecting 'TC modification' i would have to make the previous column invisible and make a new column visible for entering no of tcs modified.
Upon selecting 'System test' the other columns should go invisible and make other 3 columns visible for no of tcs executed, no of tcs passed, no of tcs failed etc...
I have put calendar in my form and I want it to be visible only if I click on the combobox and make it invisible when date gets filled in the combobox.
I wrote the following code but it gives me runtime error -2147417848(80010108) Automation error :The object invoked has disconnected from its clients.
I have a user form with multipage.
With the use of the option buttons,the page needs to made visible or invisible.
Example: on Page one, i have placed radio buttons as page2,Page3&page4.
By default only page 1 should be visible and when we select radio button page2, page2 should become visible or else it should be invisible,when we select radio button page3, page3 should become visible or else should remain invisible.
Any way that two or more people can share and make changes on a excel workbook at the same time.
View 1 Replies View RelatedHow is code or functions kept unique to a workbook? for instance i create a few toolbars that are relevant to "work book 1", however when i open another workbook "2" the toolbars do not function properly or are removed by the opening/closing of the work book, similarly other macros seem to struggle with more than one workbbok open at a time.
View 5 Replies View RelatedHow do I get a workbook to open with a selected sheet visible, or preferably all hidden? I already have a userform that opens upon opening the workbook that the user 'Enters' the workbook with.
My untidy method would have been to use an If -Then statement for each sheet in the Private Sub Workbook_Open. Is there a neater way of doing it?
I want to open a workbook, using a button, but I don't want the workbook to be visible. I'm looking for something similar to the visible = false that you can use when opening a database file. If I use the visible = true command after the workbooks.open command, it hides the workbook that the the code is in and not the one that the code is opening.
Currently I'm just using the workbooks.open command, but I just want the file I'm opening to open in the background.
I know this is probably an easy one, but can anyone help, I have a spreadsheet with aboout 8 worksheet tabs, for some reason they have disappeared I have emailed the spreadsheet to my work email and everything is fine, does anyone out there know what I have done. I have checked the tools options and view tab as informed and the sheet tabs are definately checked, also I have ensured that the tabs are not hidden.
View 9 Replies View RelatedI created 3 custom toolbars. I want toolbar A to be visible only in Workbook A.xls, toolbar B to be visible only in Workbook B.xls and toolbar C to be visible only in Workbook C.xls. while Workbooks A,B, and C are open at the same time. I use Workbook A to automatically open Workbooks B and C.
Problem: Since I'm openning the Workbooks automatically it only keeps the Toolbar C visible on all Woksheets.
I included the following code in the This Workbook Object on each Workbook:
For Workbook A:
Private Sub Workbook_Open()
Application.CommandBars("A").Visible = True
Application.CommandBars("B").Visible = False
Application.CommandBars("C").Visible = False
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.CommandBars("A").Visible = False
Application.CommandBars("B").Visible = False
Application.CommandBars("C").Visible = False..............................
I have an Excel sheet with all client information...For clinical supervision I want my team members to open their own "Supervision.xls" and click a button...this button will open "Client.xls" and select "Client info sheet"...It will then hide rows c,d,g & f...it will then filter column "e" based on the specific caseworkers name ( say "Joe") and copy only the visable columns back to their "supervision.xls" Values only (doesn't effect the colour formating of Supervision.xls) then close "Client.xls"
I am having problems with some vba codes when I protect my workbook; 'I get an run-time error 1004 Unable to set visible property of the worksheet class'
The code I am trying is:
Sub Stats1_Return_TextBox1_Click()
ActiveSheet.Unprotect "meme"
Application.Goto Worksheets("BCM Database").Range("L15")
Sheets("Stats 1").Visible = False
ActiveSheet.Protect "meme"
End Sub
How to sort this. One more question is there away of protecting you vba code? stop users being able to view or edit them for instance?
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedHow can I make one workbook close another without saving?
These all work in the immediate window, but not in the
Private Sub Workbook_BeforeClose
I've seen it done, and had the formula on a couple documents, but had a loss of data. What I'm looking for is the formula to enter into a cell for copying the name of the worksheet into that cell.
View 6 Replies View RelatedHow to do this with a macro but I want to join 6 workbooks together too make 1. Master sheet (7th copy). Below are the points of interest and a couple of questions.
1- My six books are all identical in cols.
2- The six books all have in col A my own ID number, no ID number is the same in any worksheet.
3- If I can get all 6 books together then the ID will start at #1 and finish approx at 225,000, in accending order.
4- All books have only 2 worksheets inside, Sheet1 and Sheet2 .
5- I don't want to delete or loose any data in the 6 books already made. Just make a 7th copy of the 6 .
6- The 6 w/books are called
6A- Each w/book contains approx 40,000 rows except last , approx 22,000
UPTODATE STAKESWTD SECT 1
UPTODATE STAKESWTD SECT 2
UPTODATE STAKESWTD SECT 3
UPTODATE STAKESWTD SECT 4
UPTODATE STAKESWTD SECT 5
UPTODATE STAKESWTD SECT 6
7- There are no functions in any of the w/books, just other macros which I want in the master copy.
8- Can the 7th copy be called UPTODATE STAKESWTD MASTER
I would like to place a command in a macro to have a workbook replicate itself WITHOUT replicating its macros. Is that possible? Is there a command? I am using Excel 2003.
View 9 Replies View Relatedway of changing the mode of a workbook to readonly upon opening it.
View 6 Replies View RelatedI have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
open macro-
Private Sub Workbook_Open()
Dim dTime As Date
dTime = Time
If dTime >= TimeValue("9:30 PM") And _
dTime < TimeValue("9:40 PM") Then
ImportData
End If
End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
Is there anyway I can make it so that each individual sheet in my workbook has a different password?
View 9 Replies View RelatedI've created an Excel 2007 workbook with about a dozen worksheets that are full of formulas and links to other workbooks, as well as conditional formatting that isn't backwardly compatible with Excel 2003. However, many people who want to see this workbook are still on Excel 2003. I need to recreate an Excel 2003 compatible workbook with the appearance and formatting of the original and have all the formulas and links converted to values. So, the final product will "look" just like the original without the conditional formatting, links or formulas. It will just have the look, colors and values displayed for all cells.
Essentially, I want a macro that will copy however many worksheets (1-n) are in an Excel 2007 workbook to a new Excel 2003 workbook. I'd like the worksheets to retain their label names as well.
When saving a file that has 5 sheets that extend to the right of the users screen, sometimes the left part of the report is left somewhat hidden because the last person to save it was using the part to the far right. Is there a way to move all the active cell to A1 and make sure rows A:D or so are showing?
View 4 Replies View RelatedCode, couldn't make it work with VB HTML Maker. I'm new with VBA Basically my idea is when someone open default file, insert data, try to save file, macros save workbook with inserted data as another file (*.xlsx) and make pdf in another folder. Pdf part is working fine, but with second part just can't find right option.
Pdf part
Private Sub Workbook_AfterSave(ByVal Success As Boolean)
Dim Name As String
Dim i As Integer, j As Integer
Name = ThisWorkbook.Path & "PDF Archive" & ActiveSheet.Range("F6") & " Invoice " & ActiveSheet.Range("B11")
[Code]...
Excel part
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim ActSheet As Worksheet
Dim ActBook As Workbook
Dim CurrentFile As String
Dim NewFileType As String
Dim NewFile As String
[Code]...
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
My company has complicated time sheets because we have several tasks that are billed differently to different people. Once a month we have to sit down and compile everything from several forms and so forth. I have created a worksheet that pulls all the numbers together so that they can simply be copied and pasted into our reports. The hope was to simply copy this worksheet into a time sheet workbook and it will pull out all of the correct numbers. Although all the time sheet workbooks are set up the same way, whenever I copy the file into another time sheet workbook the program keeps its references from the workbook it was in. Make sense? is there a formula that I can insert into an array to tell it to pull the information from the worksheet with the same name, but in the active workbook?
here is one of the equations I am working with:
{=TRANSPOSE('1st week'!A10:L48)}
so it would look something like this maybe
{=TRANSPOSE('[active workbook]1st week'!A10:L48)} but this doesn't work of course.
I have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.
[Code] .....
I have Excel 2002. If I start the program it opens with a blank workbook, called "Book 1".
If I then open an existing workbook, I have two Excel buttons in the Windows taskbar: the one I just opened, and the blank one titled Book 1.
At work I have Excel 2003. The blank "Book 1" is also there when I start the program, but if I then open an existing workbook, the Book 1 goes away. I like this way better.
My question is: Is this just the way versions 2002 vs. 2003 work, or can I change a setting somewhere to make Excel 2002 close its default blank workbook when I open an existing one?