I have low limits in column D and high limit in column E. In column C a letter corresponding to each limit range.
In B2 the formula should outputs the corresponding letter based of the value entered in A2. For example, if 0>=A2>=3 then the output should be"M".
The formula works fine, but if I have more conditions I'll need to use many IF() functions. Is there a better way to match the correct letter depending the value in A2?
I tried to search the forum with the above title but keep getting a fatal error.
My worksheet contains a data entry column that is verified against a named range entitled "Categories". If you click on the down arrow, it displays all the valid entries. What I'd like to do is enter in the field the first letter of the entry and display only those valid entries that start with the letter I entered. For example, if I entered "c", the validation screen would display:
Car Insurance
Car Payment
Car Repair/Tires
Charity
Chase Mortgage
Church
Cleaning Supplies
Cleaning/Laundry
Contact Lens
Cosmetics
Then, if I entered "ch", the validation screen would display:
Charity
Chase Mortgage
Church
I found the code below to do almost exactly what i want. However, i would like to know if it can be modified to only affect a specific cell range. In my case, the cell range is B9:AF37.
Option Compare Text 'A=a, B=b, ... Z=z
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Cell As Range
Dim Rng1 As Range
On Error Resume Next
Set Rng1 = ActiveSheet.Cells.SpecialCells(xlCellTypeFormulas, 1)
On Error Goto 0
If Rng1 Is Nothing Then
Set Rng1 = Range(Target.Address)
Else
Set Rng1 = Union(Range(Target.Address), Rng1)
End If
For Each Cell In Rng1
I'd like to lock some cells depending on what is put in a particular cell. As shown by the file attached, if the first column (Amendments) has a "no" in A4, I'd like to lock out cells B4:D4. (The sheet will be protected). If it's a "yes" then the cells are unlocked. I'd like to then apply this to all subsequent rows (i.e. lock B5:D5 if a "no" in A5 etc.)
View 5 Replies View RelatedI have some delivery ratings from suppliers, and I want to assign a specific letter to each rating, depending of the obtained number. Criteria is:.........
View 4 Replies View RelatedI have the following table in excel:
Price: Percentage:
$150 10%
$100 12%
$50 14%
I'm trying to use the percentage depending on what price I enter in a cell. For example; if I enter $135 then 10% will be used, if I enter $65 then 12% will be used, and if I enter $47 then 14% will be used.
I see that IF statements can only be nested 7 times. How do I create a cell that checks to see what item was selected in the dropdown box of 20 different choices and choose a particular cell range depending on what is chosen?
View 9 Replies View RelatedHere is what I have:
Column J is the date opened. Column T is the date closed. Of course,
column T will have no date if still open.
Column K and O may or may not have text.
Column AF6 has a date, mm/dd/yyyy, that is entered/changed depending on the search.
What I need is a formula in AF8 that will look at the date entered in AF6 and find a match in columns J and T. Then it will look to see if there is text in K and O. If so, populate AF8 with that text.
I'm having a bit of a block with an index/match formula that I am trying to create for the attached spreadsheet. i.e. I need to populate cell J3 with the info the corresponding letter contained in the table to the far left. The numbers of reference to match are the 'zones' in H3 and J2.
View 2 Replies View RelatedI have a set of data and I need to count the match of two ranges in a matrix, example:
ColumnA | Column B
Week | Component
1 | AAA
1 | AAA
1 | CCC
1 | DDD
1 | CCC
1 | CCC
1 | AAA
1 | AAA
2 | AAA
2 | BBB
2 | BBB
2 | AAA
2 | CCC
I want a matrix like this:
Week/Component| AAA | BBB | CCC | DDD
1: 4 | 0 | 3 | 1
2: 2 | 2 | 1 | 0
3:
etc
I have 12 components and 104 weeks which means that using DCOUNT doesn't feel like an option.
I would like something like:
FOR RANGE A1:B3000 COUNTIF 1 in column A AND AAA in Column B
I have a whole list of numbers (e.g. 7, 23, 567) and I would like to be able to tell which range they fall within and return the category.
MinMaxCategory
1275Group A
276375Group B
376600Group C
601825Group D
8261,075Group E
Therefore 7 and 23 would be Group A, and 567 would be Group C. I can do as a long nested IF, but I'm sure there must be a better way.
I need a function to compare two ranges and return a match. For example
Range A: {A56, B43, C98, D44}
Range B: {A33, G89, D44, K123, OB55}
the function would return D44. Is it possible at all with functions or do I need a macro?
I have a table (approx 10 rows x 10 columns) that I am trying to lookup. I have to first look across the top of the table (cols 2-10) to find a name, then look down for a value (exact match) within than array and then find the corresponding value (in that position) in the 1st column. I have used 'name manager' to name these arrays (in columns, rows 2-10).
I have setup the names of the arrays with a drop down list (as per some utube videos). When I try to evaluate the match function (with the array name as a cell reference) i get #value. When I directly type in the name of the array into the match function I get a correct answer.
Should I be using other functions such as indirect, choose, etc instead?
I have two columns both of which lengths will vary depending on the time-frame entered by the user but will be the same as each other for each run of the code. Because of that, I'm trying to create a named range for each column and then execute an Index Match with an Offset off of it. Below is my code which results in an "Object required" error message.
Code:
Dim Ticker As Long, Tick As Range, TIK As Range, RoleDt As Long, RD As Range, endDate As Variant
Ticker = Range("F" & Rows.Count).End(xlUp).Row
RoleDt = Range("E" & Rows.Count).End(xlUp).Row
Set TIK = Range("F2:F" & Ticker)
Set RD = Range("E2:E" & RoleDt)
cell.Formula = "=INDEX(RD,MATCH,(RC[-1],TIK,0)+1)"
I have two files
Say first file name is X and in work sheet 1 i have used name manager for two columns say "Series" and "Fund name"
Second file name is Y
R7C3 is Fundname of Y file
RC4 is Series Value of Y file
In the row of Y file , C 15 - I want to calculate the formula
Range("C15").FormulaArray = _
"=IF(ISNA(INDEX(Series,MATCH(R7C3&RC4,Fundname&Series,0))=RC4),""NO"",""YES"")"
I am not getting any error but the result is not correct , even for the series which is not there in my file "X" it says "YES"
See my codes below :
Dim colA As Variant
Dim colB As Variant
Dim WksDash As Workbook
Dim Wksfile As Workbook
Dim wksWatch As Worksheet
Dim WksDash2 As Worksheet
Dim Classunion As Variant
[Code] .....
B2 contains CITYNAME
A2 contains The name of the TAB the data relates too (although i cant find anyway of using this cell within a formula to read the relevant tab, maybe you know of a way)
This is the working code i currently have in cell B3, this is what i need to enhance.
=SUM(INDEX(ABCD!$1:$65536,0,MATCH(B2,ABCD!$1:$1,)))
This looks at the tab ABCD and sums all the values it finds in the column that matches the name supplied in cell B2 on Sheet1
Tab ABCD has dates within coulmn A, and Values in Column B, first row from Column B to Column Z contains the CITYNAME (coumn Z may become longer so this needs to be able to cope with that too.
What i would like to do is add into this an extra requirement, there must be a start and end date. I still need to use the match function as B2 changes using a drop down validation (containing CITYNAMES, these represent the columns within the tab ABCD
E1 Contains the STARTDATE
H1 Contains the ENDDATE
This is the closest I get, changing the start and end date does not give the expected result...
=SUM(--(ABCD!$1:$65536>=E1),--(ABCD!$1:$65536
I have 2 workbooks formatted the same way.
Using VBA, I want to search through book1 Col A which has a list of Code # s.
If a Code # is in Book 2 Col A, find a match on Book 1 Col A.
After finding a match, compare the range in Book 2 ( Which is the 4 cells immediately to the right ) to the match with the corresponding range in Book 1.
If the range contents are not the same, copy the range from Book2 to Book1 and replace the range in Book1.
If there is NO Match of the Code # in Col A, then Copy the entire row to Book1 and append it to the end of the current Book1 used range.
A MsgBox to show how many changes and additions at the end.
we have two workbooks which do change daily. one with 'data' sheet containing 40,000+ rows of data in coloumn 'B' another with 'cust' sheet with 10,000+ rows of data in coloumn 'C' as a part of daily work we have to compare last part of the each cell in Cust sheet with data sheet
1. last 6 digits are compared and the results copied to 'cust' sheet from 'D' column and so on adjacent to the corresponding data.
2. last 5 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (1)
3. last 4 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (2)
4. any duplicate within the row to be deleted from left to right
as the data are enormous the work can be completed only 10 - 15 % manually.
I have a problem finding the correct formula for counting matches with conditions between 2 non-equal ranges in Excel. The sheet is a try at making a working schedule template a bit automated.
For Week 1 each cell in the H16:H25 has a drop-down list (originating from BD30:BD50) where a work position can be chosen. The fixed list in BD30:BD50 starts with “<<SELECT>>” which is the default choice for the cells in H16:H25, and then “HOLD” before continuing with various work position names. K16:K25 is shift number 1 on Monday, L16:25 is shift 2 on Monday, and so on until Shift number 6. Then the rest of the days of the week follow (each with 6 shifts). Monday through Sunday (with 6 shifts for each) ranges over K16:AZ25. In the cells in K16:AZ25 the following can be entered: “x” (work), “o”(off), “-“ (leave).
The issue is the formula in each of the K26:AZ26 cells which are to total each of the shift columns . I want to count all the “x” in each column, but ONLY if the positions chosen in H16:H25 matches one of the positions in the list in BD30:BD50. NOT if a cell in H16:H25 displays “<<SELECT>>” or “HOLD” (even if it has a “x” entered in one of the Shift cells).
For example: .....
Column A contains State names; column B contains a few cities for each of the states. Row 1 contains rank as the header row. Then the table begins in cell C2 with the rates. I have two of these (on separate sheets), one titled w dep (with dependants) and the other w-o dep (without dependants). On a third sheet I have 4 combo boxes.
1.Chooses between Dep or W-O Dep
2.Chooses Rank
3.Chooses State
4.Chooses City
Here are my questions.
•How can I filter down the cities so that if I chose Texas for example, only the cities from Texas would show up in my combo box?
•I have figured out the formula to display the results from the w dep sheet but cannot get the information from the w-o dep sheet. Here is the formula I’m using.......
When I type a single lower case letter into a cell, what formula or conditional formatting should I use to always convert it to a capital letter automatically?
View 9 Replies View RelatedFor the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
I am having a hard time getting my match functions to work with letters and numbers in the same range. I am also trying to figure out a way to have the ranges switch if there is an error. because the data is in multiple columns. It is hard to explain so I have attached a sample workbook.
ExampleFile.xlsm
I am trying to do index match function with criteria ranges in another worksheets. The code kept on giving me " #Value!"..
Here is the code:
Sub test1()
Dim myvalue As Variant
Dim wsname As String
Dim i As Integer
Dim j As Integer
Dim r1 As range
Dim r2 As range
Dim r3 As range
Dim r4 As range
wsname = "CustomerIDbyParts"
[Code] .......
The resulting cell of F5 kept on returning #Value!.. I suspect that my syntax for looking up the ranges from another worksheet is wrong?
I need to create a macro to find matches between multiple specific workbooks and a named range. I am new to macros and am very confused. After searching the forums here, I am still lost, even though they are very informative. So far,I have created a Dynamic Named Range called NamesList
=OFFSET(CurrentDay!$B$2,0,0,MATCH("*",CurrentDay!$B:$B,-1),1)
that selects the cells which I update manually each day. Once I have updated the list of names, I need to create a macro that will decide whether or not the names in the dynamic named range CurrentDay (located in workbookA) already exist in workbookB. The macro needs to create a list of the which names already exist in the workbook, and which do not. For the names that do not exist in workbookB, I then need to search workbookB and workbookC for matches, again creating a list of results. Until now I have been manually using Ctrl + F (Find Method)and going down my list of names to search through each workbook.
I am getting a #REF error when using an INDIRECT function within a MATCH function to check against a dynamic named range. Basically, I am trying to get the row reference so that I can go back and extract other data from the row (in a table contained in another sheet) into the current worksheet.
I attach an example file for reference. The issue arises when a Dynamic Named Range is used. In the example file, if a value from a static range is chosen, the match with indirect function works, but it fails with the dynamic range.
Dynamic Ranges INDIRECT v2.xlsb
I am having an issue when I try a chart a named range. The named range "Refers To" is
Code:
=OFFSET($A$1,(MATCH("Kevin",$A:$A,0)-1),,,COUNTA(INDIRECT(ADDRESS((MATCH("Kevin",$A:$A,0)-1),1,1,1)
&":"&ADDRESS((MATCH("Kevin",$A:$A,0)-1),100,1,1))))
As far as I can tell, the formula works just fine. If you look in the Name Manager and check on that Name, the highlighted box shows up exactly what it should and if you do a simple MAX test, it displays the correct MAX value from that range.
The problem comes in when I try and add it to a chart. Instead of a displaying all the values in the range, it displays nothing. Doesn't flag up any errors, just nothing.
The reason I chose to do it this way is that the table contents could change on a daily basis and so could the position of the row and I don't want to have to keep changing the references in the graph so make sure the right data is being displayed. Is it just that charts don't play well with the INDIRECT function?
I have two cells where data is input in the form
1234A the suffix letters can be a,b,c,d,e,t,s,v
I need to check if the suffix letter from both cells match up...
a can only match a
b can only match b
c can only match c
d can only match d
e can only match e
a-e can match t
s can only match s
v can only match v
is this possible without any macros?
I need to change a few hundred cells (one column) where the first letter may be a capital letter to a lowercase letter.
So:
GetAwardfromBid to getAwardFromBid
or
SmallLertter to smallLetter
I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
View 3 Replies View Related