What I am trying to do is pretty simple (this is what I imagine)
I have a 4 columns
- the columns 1 and 2 contain a number of days and an associated number
- the columns 3 and 4 contain a number of days and an associated number
My formula should do this:
- if the number of days (col 1 and 3) are the same, then multiply the number in col 3 and 4 together.
- more specifically, for each number in col 1, the formula looks all matching values in col 3 and makes a simple calculation
- result displayed in column 5
Constraints
- col 1 has more data than col 3
- the data in both column are not sorted
Dim x As Integer
For x = 1 To 10 Step 1
If Cells(x, 1) = Cells(x, 3).Value Then
Cells(x, 5).Value = Cells(x, 3) * Cells(x, 4)
End If
Next x
I'm trying to get data from one ws to another with corresponding keys, and wondering what the best and most efficient way would be to accomplish this.
INDEX...MATCH ? Do While Not IsEmpty(ActiveCell)...ActiveCell.Offset(1, 0).Select...Loop?
Here's the setup:2 worksheets: source and target source ws has 2 relevant col: A and K which are key/val pairs target ws has x number of col val from source ws are to be written in 1st avail blank col on target ws some of the keys will exist in both ws, some only in one if a key from source ws is not present in target ws, it will need to be added along with its val
The # of the first avail col is targetCol: targetCol = Cells(1, Columns.Count).End(xlToLeft).Column + 1
If the following macro matchs two ID numbers from column B in column C it shoud highlight them green.
Column C may has multiple entries of column B, however the macro i have written appears to only match the first ID number found in column C from B.
I think this may have something to do with my loop, can anyone suggest a solution?
Sub colour_filter()
Dim myrange As Range Dim Rng As Range Dim rng1 As Range Dim a As Integer
Set Rng = ActiveSheet.Range("B2", Range("B" & Rows.Count).End(xlUp)) Set rng1 = ActiveSheet.Range("C2", Range("C" & Rows.Count).End(xlUp)) a = 0
For Each myrange In Rng If IsNumeric(Application.Match(myrange.Value, rng1, 0)) Then rng1(Application.Match(myrange.Value, rng1, 0), 1).Range _ ("A1", Cells(1, Columns.Count).End(xlToLeft)).Interior.color = vbGreen a = a + 1 End If Next myrange
I have a worksheet with 2 columns. The first column contains names and the second column contains numbers associated with the name.
How can I specify a name, go through the sheet to find all the occurances of that name and then paste all the numbers associated with that name in another worksheet in a set position.
Code that loops through all folders in a directory, to check each workbook in each of those folders. If any workbook name in any of these folders matches a predefined string, then open this workbook for some other codes to run.
My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.
When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.
I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).
for example:
p1 data data data data p2 data data data data
[Code] .....
needs to become:
p1 data data data data
[Code] .....
I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).
I have two tables, Table1 one has only customer codes in it, and I have Table2 with plenty of customer codes and those customer name, surname, age, location...
And I want to match and copy each of those customer codes in Table 1 all the information which is on Table2
Table 1: 50025 50026 50086
Table 2: Considering that name, age and location is each in separate cell
Now that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
So I have this problem in excel with comparing 2 columns.
Basically, I have 2 columns(a &B) that I need to compare with one another and find out the matching data. I am trying to use that matching data to enter in our reports.
Both columns might have duplicate items because I am dealing with premium numbers.
Formula to compare these 2 columns and find the matching data and extract it to a separate column. Keep in mind, i am dealing with almost 20,000 lines of data.
I want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
I need to match up the columns of 1 spreadsheet with those of another. I have a partial address that only lists city and state in one workbook. I need to match these partial addresses up with the master list that contains full addresses. It seems like it should be an easy thing to do, but I can't figure it out.
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
I am trying to write a formula that will show me if a user is making an outbound call and also showing on the Outbound working status, but unfortunatley these times will not match because one shows the time call was made and the other shows duration in status.
I created a macro that extracts two columns of numbers from one workbook and need to match them to another set of numbers in another workbook. For instance i have numbers like...
18314 907 18272 64 11005 907 11005 324
..Now i need to match these numbers up with the others to find the hyperlink associated with them.
I'm not sure if it's possible to do this, but I have three lists of data. One is a complete list (for example, the numbers 1-25). The next list is a subset of the complete list (e.g., 1,3,5,7,9). Attached to these (the subset list) is another list (let's say letters, so A goes with 1, B goes with 3, etc). I want to physically move the paired entries from Lists 2 & 3 so that List 2 matches up with List
I have 2 sheets in a workbook.Sheet1 is a master sheet with Customer code and there Sale.And Sheet2 is the sheet which has only Customer code.
Note: Its just a Example i have total 1924 data.
Now in Sheet 1 there are some Customer code which is Repeated some times 2 and 3 or even 4 times. In Sheet 2 Same as sheet 1 there are some data which is also Repeated. Now i how can i know which Customer Code in sheet 2 Missing from Sheet1 I have Colored Some Data in sheet 2 which is not match with Sheet1
For Example. In Sheet 1 221000000232 is repeated 2 times but in Sheet2 has only 1 times.
I have data collected at 2 time points. Participants have a unique alphanumeric ID that is the same at both times. I need to merge the data into one sheet where each case has all of the information from time 1 and time 2. There are many more cases at Time 1 (nearly 2000) than at time 2 (around 340).
I have prepared an example of what I need (see below), but have lots (around 300 at each time point) more variables than what has been put in the sheet.
I have created two sheets: "Roles to Courses" and "Datasheet". I have attached the zip db for review - its only 314k. I need to search the Datasheet in columns N, P for values from the Roles to Courses sheet (Business Role - SAP ECC) column A and find a match in the Datasheet. When a match is found, I need the B,C,D,E,F,G,H,I,J,K columns that contains the values of the classes from the Roles to Courses sht, to be added to the field called "Training Courses" in the Datasheet.
I started a macro but wasn't sure enough to complete the commands.
I am trying to match certain types of data from one datasheet to another. I want to match the address from the VOA worksheet to the local occupier. telephone number and local contact which are located on the raw data worksheet.
I have used the INDEXMATCH function but it doesn't correctly match the data properly as it fills certain fields that don't exist in the raw data.
I need to match data with specific criteria. Details of the problem are as follows:
I have 2 sheets: "Main" and "Sub"
In "Main" there are 3 Important Columns: Col "C", "I" and "AF" In "Sub" there are 2 Important Columns: Col "I' and "N".
Value in column "C" of "Main" is same as value in column "I" of "Sub", but not in same order.
Now the specific criteria:
If value in Column "I" of "Main" is not equal to "Zero", then the macro should pick up the value from the corresponding column "C" of "Main" and search for the same in column "I" of "Sub". After matching the same, it should find corresponding value in column "N" of "Sub". Then the macro should pick up the value from column "N" of "Sub" and put the value in the column "AF" of "Main".
This is basic requirement.
I am unable to retrieve the right value for the same.
Fine tuining will be:
If the value in column "N" of "Sub" is "Fully Automated" then it should only write "Automated" in column "AF" of "Main". And If the value is "Manual + ...." then it should write "Manual" in column "AF" of "Main".
I need add a new worksheet that outputs sheet name and box 7 data for each sheet onto a master spreadsheet. I have been playing around some code but adding a third loop is a bit of nightmare and not ideal so I've just output to msgbox for testing per. Would application.match be better to use than the 'is like'?
How do I write an if statement where if the value from a cell (mtunit!A1) exists in a row from another worksheet (sqllist!A:A) then return the value of the of the next cell(sqllist!B2) from the row where it exists, else leave it blank.
I am trying to compare a list of product codes on sheet 1 column A, with a larger list of product codes on sheet 2 column B.
My aim: when i click to button on sheet one the part numbers that are in both lists (sheet 1 and 2) Should be moved into sheet 3 columns B and be rearranged so that they match horzontally with the full sheet two pricelist which will have now moved to column A sheet 3. This should leave gaps in column B where there was no matching part number.
I would like to create a macro which I can use over and over again, with slight modifications.
I have included a sample worksheet with two (2) sheets. Sheet 1 is considered my 'master sheet' of which I want to add data to, if it exists. Sheet 2 is some additional data that may or may not be included. The common thread, between the two sheets is column A.
I would like to either add to sheet 1 or create a sheet 3 with the data, whatever is more effective.
In this 'sample' case, I would like to move the data on Sheet 2, column 'H' to Sheet 1, provided both column "A's" match. Again, if it makes more sense to combine the two on Sheet 3, no worries. However, the next time I do it the data may be in a different column so I hope to understand how to change the 'From' and 'To' columns. My rudimentary skills want to say If it exists, place it here. If not, move to the next entry.
The end result would be all the data on Sheet 1 (as it stands), joined with the data on Sheet 2 Column H, if Sheet 1 Col A = Sheet 2 Col A.
This would be a process that I would do over and over again as I populate Sheet 1 with the data I need.
I have 2 columns of data. Both should ultimately have identical data, but both have extranious data I need to separate. These lists will be 300+ long, so by hand is taking forever. Example: Column A Column B 12345 12344 12346 12345 12347 12346 12348 12347 12349 12349
I need a way to extract the 12344 from column B since it is not in A, and 12348 from A since it is not in B. They do not have the same number of entries.
I want to match rainfall with historical rainfall. It is quite simple to match a single value but I want to mtach a series or closest series (or series')
Eg for the last 6 measurements I get an couple of columns like this: Time value 1 5 2 4 3 5 4 2 5 5 6 5..........
