Message When Duplicate Item
Jul 25, 2006I Need A Macro That Will Run When A Duplicate Item Number Appears In The Same Column. So For Instance If Aaa Exists In Column "b" And Someone Trys To Enter Aaa Again A Macro Will Run.
View 2 RepliesI Need A Macro That Will Run When A Duplicate Item Number Appears In The Same Column. So For Instance If Aaa Exists In Column "b" And Someone Trys To Enter Aaa Again A Macro Will Run.
View 2 RepliesLet say I have these data on a sheet:
A1 = abc123 B1 = 12345
A4 = abc123 B4 = 12345
I would like excel to display a pop-up message saying that the data in A4 AND B4 duplicate with the data in A1 AND B1
In cell C34 I'm trying to duplicate the content in cell J70, but I don't want to show any content in C34 unless J70 is not blank.
I tried this formula in C34, but I keep receiving an error message:
=if(j70="","",(=j70)
I've been looking for a solution to highlight all duplicates within a certain column across all worksheets in the workbook as the entry is made, no button to search for them. I have found bits and pieces, but can't seem to stitch them together to create what I am looking for, still very green with vba.
My workbook is a loading schedule at a warehouse, so there is a tab for each day (the date being the tab name, ex. '12.04.13'.) Tabs are continually added and removed to progress the calendar, and minimize file size. The column I am searching for duplicates in, is column L (or 12, however you wish to identify it.) If a duplicate value is entered, I want at the very least to highlight the value just entered, and the value elsewhere on the workbook, and if possible, have a msg box pop up stating the location of the other duplicate (or at least the tab (date) the duplicate is on.) The message box is more so for an in your face error check, with a built in GPS. Would it also be possible to only search from row 2 to 100, and ignore any further rows on each sheet?
The point of this, is to locate duplicates to make sure an appt has not been double booked, and both entries can be located to verify which entry has the correct information (carrier, delivery appt, etc.)
Actually I want a macro which gives a message box "Duplicate values"
when there are duplicate values(i.e if one cell of the column has same value as that of the other cell) in a particular column suppose it to be A
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
numberdesc
1_______yellow
1_______yellow
1_______blue
2_______purple
2_______purple
3_______green
3_______orange
4_______black
I need some way that can identify when the item in the description column doesnt match the first item of the same number- for example, here the 1-blue and 3-orange would be flagged because they should match the 1-yellow and 3-green.
I need to do this on a much larger scale (approximately 20,000 data points), so I wanted to create a formula or macro that could do this for me.. I thought making a reference page with would work but I keep getting an error.. I haven't done VBA in a while, so I may have syntax errors.
If Range("A2:A9").Sheets("Sheet1") = Range("A2:A6").Sheets("Ref") And Range("B2:B9").Sheets("Sheet1") = Range("B2:B6").Sheets("Ref") Then
Range("C2:C9").Sheets("Sheet1") = "x"
End If
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies View RelatedI am using a vlookup and have a problem. I am assigning a category to an item number based on the first two characters of the item number. For example item number 60123 would equal scrap because of the first two characters of 60. But the item number can begin with either a number or letter. Here is the formula I am using that works for item numbers that begin with numbers:
=VLOOKUP(VALUE(LEFT(E2,2)),Sheet3!A:B,2,FALSE)
It works fine until I reach a item number that begins with a letter, then I get the dreaded #Value error. If I take the value out of the formula then it works for the letter based number items but not for the number based item numbers.
Here I would like to get your valued guidance for the usage of "IF" formula. I am having two sheets one is new XL-1 and other is old XL-2. I want to have a item number from the old file corresponding to the same item descprition in the new file. I am attaching the snap shots of two files which is more explanatory than describing in words here.
View 2 Replies View RelatedHow do you add icons into a message box. ie a warning triangle etc.
View 3 Replies View RelatedI am using Vlookup to compare our item number with the suppliers item number but the result is removing the decimal point on some but not all items.I have included a small sample but it concerns almost 10.000 items.
View 9 Replies View RelatedI have a worksheet that has 3 duplicate values in a particular column, I need a macros that will highlight two of the duplicates row and then another macro to delete the entire row. The duplicate element are in column R. find attached worksheet.
Copy of OCL 2010 (3).xlsx
I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
I am using the following macro to insert the word "Duplicate" in the first blank column next to a duplicate row. My data is sorted by the first column. Data Example:
12345 a
12345 a DUPLICATE
11111 b
23123 b
Here is the macro I am using and it does not work. It marks the first duplicate it finds then goes into an infinite loop. Any Idea where I went wrong?
Sub MarkDupes()
x = ActiveCell.Row
y = x + 1
Do While Cells(x, 1).Value <> ""
Do While Cells(y, 1).Value <> ""
If (Cells(x, 1).Value = Cells(y, 1).Value) Then
Cells(y, 3).Formula = "Duplicate"
Else
y = y + 1
End If
Loop
x = x + 1
y = x + 1
Loop
End Sub
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
how I can, in a formulae, identify the last item(s) in a list of values. For example I have data in rows 1-25 with numeric data in. I want to put a formula in, say, row 100 that averages the last three data items above in the same column, but the number of data items will increase over time to use row 26, 27, etc. and I don't want to change the formula in row 100.
View 4 Replies View RelatedI am trying to find the std dev for each items below. I have tried to look for online tutorials but all tutorials I have seen only teach me to do a std dev for 1 set of item.
ItemQuantityC3C4D4A4B4A4B4C4C4B4B4A5D5C5D6B6C6D6B6A6D6A6D6B6C6D6C6D6D10B10A10B10C10D10A10D10A10C10C10D10B10
I have problem with filter more than 10,000 different item using Excel 2010, any other way to filter?
View 3 Replies View RelatedI need a macro to add the last 2 items in column G, if they are both positive or negative. If one of the values is either positive or negative, then they must be subtracted.
In the example below the formula in G45 = G43+G44
The data is imported so the range will allways change foe rg G45 must become G75, then the formula will be G73+G74 if they are either both postive or negative or if either one is positive and the other is negative then G73-G74 ....
I need to sum every third item in cloumn B begiinining with b2, B5, B8 etc. Is there a formula that I can use to calculate every third row
View 9 Replies View RelatedI have a combo box(form control) and have it populated with data.
I want each item to do something so that when one is selected it triggers and event.
the items are:
Rounds 1 - 5
Rounds 6 - 10
Rounds 11 - 15...just like that all the way to 30
the worksheets are labeled "Rd 1", "Rd 2", "Rd 3" ...etc
When I click "Rounds 1 - 5" in the combo box, besides the "Summary" worksheet (which is where the combo box resides) only "Rd 1 - Rd 5" should be visible, I want all other sheets hidden, and when I click "Rounds 6 - 10" I want "Rd 6 - Rd 10" visible and all else hidden.
how I can match an item in a row with another row?
I have a row of data A2:J2. A persons name could be in any column in that row.
I have another two rows of data where the peoples name and department name appear Where L2:L7 = peoples names
where M2:M7 = peoples department
I want to match a name in A2:J2 with one in L2:L7 and if matched put the department name in K2. Then obiviously i will copy the formular down column K.
I have a list in column B starting in B11.
The list can have one or many items in it, and will not have blank cells between any populated cells.
Is there a way in Excel to determine the last item in the column without using VBA?
I am trying to add up the same item until it changes. I have attached the file with the desired outcome in the 2nd column.
View 1 Replies View RelatedI have a list that kind of looks like this. I sorted it by date, then by location, and then by time. I need to find the earliest item in one location on a given day and display as a list.
datelocationtime
6/1/2013 A730
6/1/2013 A745
6/1/2013 A750
6/1/2013 B800
6/1/2013 B810
6/1/2013 C730
6/1/2013 C745
6/1/2013 C800
6/1/2013 C815
6/2/2013 A730
6/2/2013 A745
6/2/2013 A800
6/2/2013 A815
6/2/2013 B700
6/2/2013 B800
6/2/2013 B815
6/2/2013 C800
6/2/2013 C815
When copying the formula =SUMIFS(G3:G103,I3:I103,"3") how do I modify it so that only the "3" rolls to the next integer and the rest of the formula remains constant? In other words the 3 would roll to a 4 when copied down a column and the rest of the formula does not change?
View 4 Replies View RelatedI have a table, which has pairs, e.g like this:
A=1
B=2
etc
how to give the value to variable based on this pairs? I mean something like this:
If left(mystring;1)=A, then
myvar=1
I used the case-structure, but maybe there is a better solution, which can use an array in order not to write all of the items whenever I need it.