I have a small formatting issue in my excel spreadsheet.
I would like to move cells in the form below:
1
0
95
35
21
2
12
110
272
14
To:
1
2
0
12
95
110
35
272
21
14
Is there a key combination to move Right to the end of the row even though there may be blanks within that row?
If I do a Shift>Ctrl>Right arrow it will highlight to the cell just before the first blank cell.
I am trying to "Move" to the Right end of the table reguardless of what cell I'm in or if there are blanks in the row.
Basically, if a cell value exists in a list on another worksheet then move to next row. If the cell value does NOT exist then look at columns J, K, L and M and see if a specific value exists in each. If any of these cells contain this criteria then copy the row and add it to the bottom of a growing list on another sheet. Here is what I have so far.
Sub OrdersHeld()
Application.ScreenUpdating = False
Dim x As Double
Dim ws As Worksheet
Dim numberofrows As Double
[Code] ......
Is there other syntax that can be used other than:
Range("A23").Select?
I'm trying to move to any cell below some text. So, it will find "Total" and move the cell below.
Also, is there any way to specify to select cells without specifying the actual cell name?
I convert many large files from csv to Excel. Once I import the csv to Excel I must break the worksheet into multiple depending on when a Cell in column F is equal to a "cata" of which I do successfully with a macro.
The next step in VBA I attempt; is to go 10 cells to the right of the active cell (cata) and anchor that cell address so I may copy the range from "A1" to the anchored cell address.
I have been unable to pass the the value 10 cells to the right of the active cell. I would be grateful of any suggestions.
Here is the VBA Code I've been trying. (It bombs after it finds the cell 10 cells from the active cell.)
Sub SelectRange()
ActiveCell.Offset(0, 10).Select = EndRange
Sheets("Sheet1").Activate
Range("A1,EndRange").Select 'not working'
Selection.Cut
Sheets.Add
ActiveSheet.Paste
End Sub
I am working on automating a report via vba code where the range of the chart needs to be changed every time the macro is run. Basically the chart is a snapshot of performance of 6 months .
For example : if the chart is already displaying Jan - Jun data , when the information for July is added and report updated the chart should be updated to reflect Feb - Jul data .
There are many graphs but have added 2 sample here for ref .
I've been trying to figure out how to use a formula that would enable me to copy/copy & move a range of cells right one column if a certain criteria is met.
Basically, if a criteria is met, I want to 'copy' everything from a row to another row, but offset it by one column (so that what was in, let's say, a1 would be in b2).
I've been tinkering with index(), if() and offset() in various combinations but think I must be missing something.
I have a spreadsheet with data organized into columns in sets of two - the first column is an X value (Pixel number) and the second column is the Y value (pixel density). I'm trying to make a macro that will select the first set of columns, chart it, move the chart to the next sheet, then select the next two columns of data, chart them and move the chart to the next sheet etc. I've gotten as far as having it make the chart and move it, but I can't seem to make it select the next set of columns - I've been trying different things for a couple days now.
Code:
I'm having a toughs time with what I thought was a simple task. I need to cut and insert/paste a range of cells and then repeat in a loop. Explicitly, I have 3 columns with 2990 rows. Every 46 rows is a 'group' and I want to cut each group and paste at the top of the sheet so I have only 46 rows and (2990/46*3) 195 columns. I need to preserve the order so that the group at the bottom becomes the rightmost group........
View 5 Replies View Relatedhow to move formula range without inserting any rows. For example, I have a sum(a1:a3) and I need to have sum(a2:a4). I have hundreds of these little formulas through the spreadsheet and they are driving me crazy. Is there any way I can select a block of data and have a macro simply shift all formula ranges within that block one down? Copying the formulas down and then moving the result in place of the original doesn't work as I have formulas relying on these results and I will get #REF errors. I bought an Excel VBA for dummies, but have been so swamped with work that I haven't had a chance to look at it, or even to think about where I would begin to look.
View 1 Replies View RelatedIm trying to create a macro that when ran it copies all information from that row and puts it on a different worksheet. It needs to be put on the next available line in the new worksheet. and then the information deleted off the original and all rows moved up to fill in the gap. the rows all contain 2 formulas i'd like to keep specific to the row number Also it contains formulas id like to keep but change the cell numbers according to which row it is copied over to.
View 2 Replies View RelatedLet's assume I've got a list of 100 words (most spelled incorrectly and located in cells A1:A100) and I want to place only the words spelled correctly into Column B. For example, if 10 words are spelled correctly, they should go in cells B1:B10.
I start with the first word in cell A1 and move it to cell B1 to be spellchecked. If it's spelled correctly, I keep it in cell B1 and move the word in cell A2 into cell B2 to be spellchecked. (If A1 is spelled incorrectly, I move the word in A2 into B1, thereby discarding the misspelled word.)
Can I code this so that when the spellchecker box opens (i.e. word is spelled wrong) it will close automatically (e.g. [cancel]) and move to the next word?
I have a text string in a cell. it is comprised of a series of numbers and text. i would like to " cut" the first part of the string starting from the first space and paste in the cell to the left. For example.
range("b11") has the following: "This is my example"
I would like to perform the following:
range ("A11") would equal "This"
Range ("b11") would equal "is my example"
(note the space has been completly removed as well)
I have an excel file that contains data from bank transactions.
In column A at irregular intervals is a cell with " User Group:" It depends on how many transactions there are in a batch, could be 1 or up to say 200 as to when the next "User Group" cell is found.
After that also in column A is "Item" then "Lodgement Ref" then at the end "Batch Totals"
i.e.
User Group:
Item
Lodgement Ref
Batch Totals:
User Group:
Item
Lodgement Ref
Lodgement Ref
Lodgement Ref
Batch Totals:
I want to find each instance of "Item" then move that cell and every cell over to column CK down to and including "Batch Totals" i.e. A3401 to CK3410 to CM 3400 so it lines up with the top of the transaction block.
There are over 60,000 lines so it's worth trying to find a solution as I can then use the methodology to make other refinements in the spreadsheet.
My check register was exported to a excel spread sheet where the deposits and debits are all in one column E. The debits are entered as a negative number. I want to create two separate debit and deposit columns with the appropriate data entered. What the best way of moving the data accordingly?
View 3 Replies View RelatedVBA to find the next appropriate blank cell in column "A" when copying ranges of varying sizes and pasting them in a new worksheet one after the next.
Currently I have recorded a macro that uses the code below to get to this location, but I am worried this will break when I get new data of a different range size;
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select 'my initial range selection
Selection.Copy
Windows("myfile.csv").Activate
ActiveSheet.Paste
ActiveCell.SpecialCells(xlLastCell).Select 'finds last cell of my paste
Range("N69").Select 'I hit the down arrow once to get to new blank row
Selection.End(xlToLeft).Select 'to go to begining/col A of new row for next paste
I have tried playing around with
ActiveCell.Next
but can't get it to work.
Move after return direction Xltoright In Specified Range.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Address = ThisWorkbook.Worksheets("mastersheet").Range("trgadd") Then
Application.MoveAfterReturnDirection = xlToRight
Else
Application.MoveAfterReturnDirection = xlDown
End If
I am looking for some example code that when I get an error using workbook.open, because a file is corrupt, I can cut from the list and paste into a range to show that file had errors, then delete that row and continue.
For example
My list:
Column A Column B Errors List Error
File path B and name Information File Path A Information
File path C and name Information
File path D and name Information
I can cut and paste File path C into an errors list, then delete the row A and B and shift the below lines up.
I want to set range a entire column,the rows are dynamic and i want to do it on all the columns in the sheet, my problem is that after i set the range(i hope i did good) i want to do a average of the range and to put the result in a new sheet on a row. I'm sorry for the mess in the code its one of my first macros
Option Explicit
Sub Average()
Dim R As Integer
Dim help As String
Dim Range1 As Range
Dim E As Integer
Dim Avg As Integer
R = 1
'/////CREATE NEW SHEET AND COPY THE FIRST TWO ROWS TO THE NEW ONE
Sheets("UXP data").Select
'Sheets.Add
Sheets("UXP data").Select......................
I'm trying to do is loop through a range of cells, and if the cell meets a condition I want to move it and 2 cells to the right of it left by one cell.
Sub MoveRangeOfCellsBasedOnCellCriteria()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("H2", Range("H65536").End(xlUp))
For Each cell In myrange
If IsNumeric(Left(cell.Value, 1)) _
Or Left(cell.Value, 5) = "UNIT " _
Or Left(cell.Value, 4) = "THE " _
Or Left(cell.Value, 5) = "FLAT " Then
Else
cell.Range("A1:C1").Select
Selection.Cut
cell.Offset(0, -1).Range("A1").Select
ActiveSheet.Paste
cell.Offset(1, 1).Range("A1").Select
End If
Next cell
End Sub
I am trying to create a macro that will look in Column B for the word "RPLCASE." Whenever "RPLCASE" appears in Column B, the cells in that particular row will move over (Right) one space. I am simply trying to align the data from a file that I FTP'd from Net Term to Excel. You can see how the data should look in the 2nd example.
14-Feb-08JERRPLCASE671150536:116:56RPLCASE78308147:077:54RPLCASE89431228:228:57RPLCASE910592289:159:59RPLCASE10114732310:0010:48RPLCASE1112146811:4511:58RPLCASE12136563612:0612:56RPLCASE13144122113:0313:58RPLCASE14154642314:0114:23**********--------------TOTALS4632228LDLPKGPIK671361126:046:58PKGPIK781461247:007:56PKGPIK8963598:168:55PKGPIK9101591309:019:59PKGPIK101115113910:0010:54PKGPIK1112968711:3211:59PKGPIK121319916012:0012:59PKGPIK131412310313:0013:59PKGPIK141518716414:0014:59PKGPIK15161119715:0015:54PKGPIK16173316:3016:31**********--------------TOTALS13741178
I have a command button that will run paste a value in a specified cell but I also need it to check for the next open cell and paste the data if the previous cell in a specifid rage is already filled with data. Here is my code I have below. *jumps with Joy* My Range is E6 to E10
VB:
Private Sub CommandButton1_Click()
Dim f As Double
Dim t As Double
[Code].....
I have 400 source files containing (among others) 8 sheets with daily results: "Fri 23", "Mon 26", "Tue 27", "Wed 28", "Thu 29", "Fri 30", "Sat 31 (if applicable)", "Mon 2".
Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
View 9 Replies View RelatedI have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
How would one go about making a module that would tell Sheet1 that if any number in column B is greater than 1 then take the contents of the row that number is in and copy it to Sheet2? Attached is an example of the workbook.
I have 8 rows (B345:B352) that have a formula similar to this:=IF(Site1!B53>0,CONCATENATE(Site1!$B$53," Scansys 942 @ ","$",Site1!D53,".00"),""). By the way, can the formula be shortened? I tried formatting the merged cell but nothing changes.
When Site1!B53=0, then there's nothing in the cell.That's how I want it. But say, row 3, Site3!$B$53 >0 how do I programatically move (copy/paste?) row 3 to row 1 (since row 1 and row 2 are blank)? In other words, Since rows 1 & 2 is blank, I don't want the two empty rows there, so I would like to move row 3 up to row1.
I have a workbook with several sheets each containing different numbers of rows. These rows contain data from clients (codes etc applying to motors). The rows have been randomly populated and I am having to move rows from somewhere in the sheet up or down so the codes are grouped according to which motor they apply to.
What I want to do is select a row and be able to run a macro that will move it where I want. The destination can be up or down and any number of rows away. Does anyone have any ideas how to do this? I was thinking that if I selected the row I wanted to move and the one I wanted to move it to then run the macro it could be moved. Its not to replace the destination row, but be inserted alongside it.
For a specific equation to work I need to know the distance whenever the acceleration is maximum.
The last part is a piece of cake, using MAX I get the desired results.
However, returning the distance is difficult.
What I'd like to do is return the value of the cell to the right of the maximum acceleration.
Using
=ADDRESS(MATCH(MAX(K2:K754);K2:K754;0);COLUMN(K2:K754))
I got the address of MAX, but that's about as far as I get.
I have got a problem with moving to another cell. For example, I click A1, the active cell is A1, then I wanna move to B1. I usually just need to use the right arrow on my keyboard to move. But this time, it didn't move - instead, it moves the scroll bar.
View 2 Replies View Related