Move Correct Spelling To A Another Range
Oct 19, 2006
Let's assume I've got a list of 100 words (most spelled incorrectly and located in cells A1:A100) and I want to place only the words spelled correctly into Column B. For example, if 10 words are spelled correctly, they should go in cells B1:B10.
I start with the first word in cell A1 and move it to cell B1 to be spellchecked. If it's spelled correctly, I keep it in cell B1 and move the word in cell A2 into cell B2 to be spellchecked. (If A1 is spelled incorrectly, I move the word in A2 into B1, thereby discarding the misspelled word.)
Can I code this so that when the spellchecker box opens (i.e. word is spelled wrong) it will close automatically (e.g. [cancel]) and move to the next word?
View 3 Replies
ADVERTISEMENT
Jul 15, 2009
Is there any way to use formula or VBA to highlight cells which contain the correct spelling?
For example i have columns A filled with words in each cell but need to highlight which ones have the correct spelling, as there are more with incorrect so i need to visually see the correct spelling.
View 7 Replies
View Related
Apr 23, 2014
I am trying to do with this spreadsheet project,
On the "Master" tab, I would paste in the newest information received from our system weeklywhich is around 2600 rows. I want to then compare the Master sheet to the other tabs and if there is a new Serial Number present in column I, then add that row of data to the next available row at the bottom to the correct tab.
The Orange tabs Fleet Volume PC, Fleet Volume BW, Fleet Volume Duplex will house all countries and all serial numbers but Fleet Volume Color tab will only have Color Serial Numbers for all countries, column J on the Master tab.
So, the same will goes for the USA Volume and CAN Volumes tab, only those serial numbers for that country will falls in these tabs and color only will go in the color tabs. There are 14 other tabs missing from this workbook with other countries, just removed to keep size of file within limits.
From my workbook, rows 29 to 33 on the Master tab are new serial numbers.
Also, I want to highlight the data on the Master, after comparing this Master tab to the other tabs and within the Master highlight in yellow the cells that have new updated information!
View 14 Replies
View Related
Oct 8, 2009
I have a number of Vlooks set up to reference cost information set up against Names in various workbooks.
The problem is wherever a name is mis-spelt then the lookup fails to match the values.
View 12 Replies
View Related
Apr 11, 2008
=IF(D$21="SOUTH FLORIDA 6","6 MONTH FENCE RENTAL",
IF(AND(D$21="SOUTH FLORIDA 12",S15=24),"24 MONTH FENCE RENTAL",
IF(AND(D$21="SOUTH FLORIDA 12",S17=12),"12 MONTH FENCE RENEWAL",
IF(AND(D$21="SOUTH FLORIDA 6",S16=6),"6 MONTH FENCE RENEWAL",
IF(AND(D$21="SOUTH FLORIDA 12",S14=18),"18 MONTH FENCE RENTAL",
IF(D$21="SOUTH FLORIDA 12","12 MONTH FENCE RENTAL",
"BIKE BARRICADES ARE ALSO AVAILABLE"))))))
I having trouble getting this IF statement to function properly. The Bold section is the part that will not function properly. I have checked all the spelling, spaces, but for some reason it wont display properly.
Based on the above is there a way to make this a type of lookup?
Im at wits end with all the ifs.
View 9 Replies
View Related
Nov 15, 2006
When I use the following code, the spell check still checks the entire sheet. How do I have the spell checker on check a specific cell/range of cells?
Sub spellchecker()
Range("B7").CheckSpelling
End Sub
View 8 Replies
View Related
Feb 15, 2010
I'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View 4 Replies
View Related
Oct 29, 2006
I have a spreadsheet that I'm using for a college football pool. We have almost 100 players, and have it set up for each player to pick up to 20 games each week. There is a sheet for each week of the season. Now, I copy each players picks from a message board and paste them under that players name. My problem is, that some people don't spell the teams correctly or abbreviate when they were told not too. This leads to them missing the points because excel sees it as a wrong entry. What I wantto accomplish is setting up some way to have excel verify the spelling is correct when the players entries are pasted in the sheet. I would also like it to auto-correct errors it finds...say a player types in Ohio St. but the winner is entered as Ohio State...This would be seen as a wrong entry for Ohio St. so I want excel to recognize it and correct it. Also simple spelling errors as well...
View 9 Replies
View Related
Jun 28, 2008
Is there any way for excel to automatically choose the next best spelling option for many rows of data containing mispelled words? For example, is there a way to automate pressing "Change" on every mispelling window when pressing F7?
View 8 Replies
View Related
Jan 26, 2014
We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
View 4 Replies
View Related
Jul 3, 2008
I have a table with 3 columns of dates and then a column with Set # that I
feel in the box #.
I need to see how many items processed for each set per day.
Example:
[url]
The problem is that it counts the correct amount but not with the correct
dates.
The formula that I use is:
=SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
View 14 Replies
View Related
May 20, 2014
I'm working on a workbook that will track staffing patterns.
The workbook has three worksheets: Sheet1 "RCS", Sheet2 "HCT' and Sheet3 "Hidden". I've attached the workbook to this thread. The password for the form is "j".
On Sheet3 "Hidden" I have two tables that are set up to collect the SUM of columns on Sheets1 "RCS" and Sheet2 "HCT". I'm finding the SUM of each range by way of the background color. I've set up the following formulas and when the "data collection tables" are in the same worksheets as the original information, the formula's work perfectly:
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] ........
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] .......
I have two more functions that aren't working due to the fact that the source values are percentages and NOT plain numbers. The above functions work great for SUM but not for percentages. EXAMPLE--Let's say, 3 sub percentages it gives me the SUM of the 3 percentages (i.e. 85% + 100% + 100% = 285% instead of giving me 95%.
[Code] ........
How might I use the following functions to find the average of the source fields instead of the SUM?
View 7 Replies
View Related
Feb 16, 2013
I have a small formatting issue in my excel spreadsheet.
I would like to move cells in the form below:
1
0
95
35
21
2
12
110
272
14
To:
1
2
0
12
95
110
35
272
21
14
View 4 Replies
View Related
Nov 1, 2007
Is there a key combination to move Right to the end of the row even though there may be blanks within that row?
If I do a Shift>Ctrl>Right arrow it will highlight to the cell just before the first blank cell.
I am trying to "Move" to the Right end of the table reguardless of what cell I'm in or if there are blanks in the row.
View 9 Replies
View Related
Jun 18, 2014
Basically, if a cell value exists in a list on another worksheet then move to next row. If the cell value does NOT exist then look at columns J, K, L and M and see if a specific value exists in each. If any of these cells contain this criteria then copy the row and add it to the bottom of a growing list on another sheet. Here is what I have so far.
Sub OrdersHeld()
Application.ScreenUpdating = False
Dim x As Double
Dim ws As Worksheet
Dim numberofrows As Double
[Code] ......
View 11 Replies
View Related
Jul 2, 2008
Is there other syntax that can be used other than:
Range("A23").Select?
I'm trying to move to any cell below some text. So, it will find "Total" and move the cell below.
Also, is there any way to specify to select cells without specifying the actual cell name?
View 9 Replies
View Related
Nov 8, 2006
I convert many large files from csv to Excel. Once I import the csv to Excel I must break the worksheet into multiple depending on when a Cell in column F is equal to a "cata" of which I do successfully with a macro.
The next step in VBA I attempt; is to go 10 cells to the right of the active cell (cata) and anchor that cell address so I may copy the range from "A1" to the anchored cell address.
I have been unable to pass the the value 10 cells to the right of the active cell. I would be grateful of any suggestions.
Here is the VBA Code I've been trying. (It bombs after it finds the cell 10 cells from the active cell.)
Sub SelectRange()
ActiveCell.Offset(0, 10).Select = EndRange
Sheets("Sheet1").Activate
Range("A1,EndRange").Select 'not working'
Selection.Cut
Sheets.Add
ActiveSheet.Paste
End Sub
View 9 Replies
View Related
Aug 30, 2012
I am working on automating a report via vba code where the range of the chart needs to be changed every time the macro is run. Basically the chart is a snapshot of performance of 6 months .
For example : if the chart is already displaying Jan - Jun data , when the information for July is added and report updated the chart should be updated to reflect Feb - Jul data .
There are many graphs but have added 2 sample here for ref .
View 5 Replies
View Related
Aug 12, 2009
I've been trying to figure out how to use a formula that would enable me to copy/copy & move a range of cells right one column if a certain criteria is met.
Basically, if a criteria is met, I want to 'copy' everything from a row to another row, but offset it by one column (so that what was in, let's say, a1 would be in b2).
I've been tinkering with index(), if() and offset() in various combinations but think I must be missing something.
View 5 Replies
View Related
Nov 19, 2009
I have a spreadsheet with data organized into columns in sets of two - the first column is an X value (Pixel number) and the second column is the Y value (pixel density). I'm trying to make a macro that will select the first set of columns, chart it, move the chart to the next sheet, then select the next two columns of data, chart them and move the chart to the next sheet etc. I've gotten as far as having it make the chart and move it, but I can't seem to make it select the next set of columns - I've been trying different things for a couple days now.
Code:
View 4 Replies
View Related
Feb 3, 2010
I'm having a toughs time with what I thought was a simple task. I need to cut and insert/paste a range of cells and then repeat in a loop. Explicitly, I have 3 columns with 2990 rows. Every 46 rows is a 'group' and I want to cut each group and paste at the top of the sheet so I have only 46 rows and (2990/46*3) 195 columns. I need to preserve the order so that the group at the bottom becomes the rightmost group........
View 5 Replies
View Related
Jun 19, 2014
how to move formula range without inserting any rows. For example, I have a sum(a1:a3) and I need to have sum(a2:a4). I have hundreds of these little formulas through the spreadsheet and they are driving me crazy. Is there any way I can select a block of data and have a macro simply shift all formula ranges within that block one down? Copying the formulas down and then moving the result in place of the original doesn't work as I have formulas relying on these results and I will get #REF errors. I bought an Excel VBA for dummies, but have been so swamped with work that I haven't had a chance to look at it, or even to think about where I would begin to look.
View 1 Replies
View Related
Aug 22, 2008
Im trying to create a macro that when ran it copies all information from that row and puts it on a different worksheet. It needs to be put on the next available line in the new worksheet. and then the information deleted off the original and all rows moved up to fill in the gap. the rows all contain 2 formulas i'd like to keep specific to the row number Also it contains formulas id like to keep but change the cell numbers according to which row it is copied over to.
View 2 Replies
View Related
Nov 6, 2006
I have a text string in a cell. it is comprised of a series of numbers and text. i would like to " cut" the first part of the string starting from the first space and paste in the cell to the left. For example.
range("b11") has the following: "This is my example"
I would like to perform the following:
range ("A11") would equal "This"
Range ("b11") would equal "is my example"
(note the space has been completly removed as well)
View 6 Replies
View Related
Oct 14, 2013
I have an excel file that contains data from bank transactions.
In column A at irregular intervals is a cell with " User Group:" It depends on how many transactions there are in a batch, could be 1 or up to say 200 as to when the next "User Group" cell is found.
After that also in column A is "Item" then "Lodgement Ref" then at the end "Batch Totals"
i.e.
User Group:
Item
Lodgement Ref
Batch Totals:
User Group:
Item
Lodgement Ref
Lodgement Ref
Lodgement Ref
Batch Totals:
I want to find each instance of "Item" then move that cell and every cell over to column CK down to and including "Batch Totals" i.e. A3401 to CK3410 to CM 3400 so it lines up with the top of the transaction block.
There are over 60,000 lines so it's worth trying to find a solution as I can then use the methodology to make other refinements in the spreadsheet.
View 9 Replies
View Related
Dec 16, 2008
My check register was exported to a excel spread sheet where the deposits and debits are all in one column E. The debits are entered as a negative number. I want to create two separate debit and deposit columns with the appropriate data entered. What the best way of moving the data accordingly?
View 3 Replies
View Related
Jun 10, 2009
VBA to find the next appropriate blank cell in column "A" when copying ranges of varying sizes and pasting them in a new worksheet one after the next.
Currently I have recorded a macro that uses the code below to get to this location, but I am worried this will break when I get new data of a different range size;
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select 'my initial range selection
Selection.Copy
Windows("myfile.csv").Activate
ActiveSheet.Paste
ActiveCell.SpecialCells(xlLastCell).Select 'finds last cell of my paste
Range("N69").Select 'I hit the down arrow once to get to new blank row
Selection.End(xlToLeft).Select 'to go to begining/col A of new row for next paste
I have tried playing around with
ActiveCell.Next
but can't get it to work.
View 3 Replies
View Related
Apr 12, 2007
Move after return direction Xltoright In Specified Range.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Address = ThisWorkbook.Worksheets("mastersheet").Range("trgadd") Then
Application.MoveAfterReturnDirection = xlToRight
Else
Application.MoveAfterReturnDirection = xlDown
End If
View 4 Replies
View Related
Oct 13, 2012
I am looking for some example code that when I get an error using workbook.open, because a file is corrupt, I can cut from the list and paste into a range to show that file had errors, then delete that row and continue.
For example
My list:
Column A Column B Errors List Error
File path B and name Information File Path A Information
File path C and name Information
File path D and name Information
I can cut and paste File path C into an errors list, then delete the row A and B and shift the below lines up.
View 1 Replies
View Related
Sep 27, 2007
I want to set range a entire column,the rows are dynamic and i want to do it on all the columns in the sheet, my problem is that after i set the range(i hope i did good) i want to do a average of the range and to put the result in a new sheet on a row. I'm sorry for the mess in the code its one of my first macros
Option Explicit
Sub Average()
Dim R As Integer
Dim help As String
Dim Range1 As Range
Dim E As Integer
Dim Avg As Integer
R = 1
'/////CREATE NEW SHEET AND COPY THE FIRST TWO ROWS TO THE NEW ONE
Sheets("UXP data").Select
'Sheets.Add
Sheets("UXP data").Select......................
View 2 Replies
View Related
