to prepare an excel spreadsheet for a mailmerge but as all of the info for 1 recipient needs to be in columns instead of rows. I need to convert 2 columns' data into columns but only when there are duplicate invoices, see below;
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
I currently have a sheet of 20,000+ items and 2 columns. My first column is an part number and the second is a date. Each part number can be show multiple times but will have a different date each time. What I want to do is that the first occurrence of each part number (and corresponding date) and put it in sheet 1, the second occurrence of each part number and date into cell 2, third in cell 3 and so on... not all part numbers are showing multiple times, only certain ones.
I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A 100 101 102 105 100 101 102 105
Col D 5 4 2 4 1 2 3 1
After my code is run, I need for my spreadsheet to look like this
Col A 100 101 102 105
Col D 6 6 5 5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
------- Public Sub FindDuplicates() For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row) SrchValue = Worksheets(1).Cells(RwCnt, 1).Value If Len(Trim(SrchValue)) > 0 Then With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A 100 101 102 105 100 101 102 105
Col D 5 4 2 4 1 2 3 1
After my code is run, I need for my spreadsheet to look like this Col A 100.........................
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014 28/1/2014 28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
I'm trying to create a .cvs file from an exported excel report, but before I can import it to a database I'd like to have one row per record.
I've already omitted out the headers and footers blank spaces and unnecessary columns from the excel file and I needed to just combine multiple rows into one.
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
I have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
I'm essentially getting a lot of data at the moment, which has a few orders people have made on my website.
Essentially, think order id, address etc and then all the products the customer has ordered.
However, the part which includes what the customer has ordered creates multiple rows of data, with the order ids etc duplicated. What I need to do is consolidate this into 1 row. So to add additional columns instead of rows.
The reason fro this is I want to mail merge the data into an invoice and mail merges work of 1 line of data at a time. I've attached an example, any way to do this?
(Attached to this post / or linked here: [URL] ....)
I have a dropdown list with names of different people: Bob, Jane, Joe, et cetera. I also have tabs at the bottom (sheets) for each of these people. Is it possible that when a name is selected from the dropdown box in column D, say Bob, the whole row (row 10 or whatever) is cut from main sheet and put into Bob's sheet, then the row is deleted from main sheet? If this doesn't make sense (because I stink at making sense), just let me know and I will try to clarify
I'll try to be clear on what I need to do and hope I can find a solution. I've found similar threads but I can not edit them for my use so I had to ask again. What I have is a lot of cows, calfs, heifers.
When a calf turns 12 months old , (ex: =IF(A3>11;move_row(sheet_heifers);"")), I need the entire row move to other sheet (heifers). and when the heifer gives births the first time (ex: column- =IF(A7<>"";move_row((sheet_cows);"" ) the entire row needs to move to other sheet (cows). I can do age calculating and the rest well.
I am trying to do work on a sheet and am getting very frustrated. I have a list of several different data entries that contain a row of information. I need to have the excel sheet move these rows to a different sheet in a specified location. For example, in the first column of the data I have the list of commodities, (sugar, cotton, yen, euro, and copper). Then in the second column I have the price and then the quantity. I want to move them automatically from sheet 1 (where they are entered) to a specific location on Sheet 2. I want Cotton to be in A2, Sugar to be in A20, Yen to be in A30, Euro to be in A40 and copper to be in A50. I would like the data to be cut from sheet one and inserted into sheet 2 so that the sheet can move them every day.
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5 123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
I'd like to write some code to do the following: When the first cell of the row contains an "Y", move the entire row to another sheet (in the same file), keeping in mind that this sheet already contains some rows (so add the row on the first empty row in the sheet). Afterwards the original sheet contains no longer any rows in which the first cell is filled with an "Y".
I have created a spreadsheet with 4820 rows of data (4821 for computational purposes, the last row being blank) with 5 columns.
1. every third row is blank and it needs to be removed (3, 6, 9,...4818, 4821). Once this is accomplished,
2. I need to move the data that is now found in the even rows, column E moved to the above, current odd row, column F. (ie. E2 to F1, E4 to F3, E6 to F5,...E4808 to F4807...,E4820 to F4819 (however it won't go this high). then
3. I need to delete all the current even rows, as the data I need will be in the odd rows.
I am running through some old accounting documents in excel 2003 (originally from SAP), that contain information in row form that I would like in Column form. Column E indicates to me whether this was an invoiced amount or payment amount or "other." I have limited VBA exposure, but am fairly proficient at what I do know. This is just too difficult for me!
Where the "Assignment" #'s are equal, I need the script/macro to move "up" YP's, YQ's,
See Original Layout.jpg Then What I'd Like.jpg Then End Result
I need to move a number of rows, based on user input in front of the first column, continuously until it 'flattens out' into one row.. And then do the procedure again for the next row Kinda hard to explain.. maybe i'll use an example using this matrix :
I have the following spreadsheet with 4 columns of data:
1000001245aMr Fred Blogs 1000001270a1 Blog Street 1000001270bNorwich 1000001270cNorfolk 1000001270eNRx x99 1000001270gThe Manager 1000001270k01603 555 555 1000001270l01603 555 555 1000001270qManager 1000001270xN 1000001270yN 1000002245aMrs Fredilina blogs 1000002270a10 Blog Street 1000002270bNorwich etc etc for about 36,000 rows.
What I need is for each unigue reference ID (column A), I need all corresponding data moved up into a single row in serperate columns, something like this:
1000001 |245|a|Mr Fred Blogs| 270|a| 1 Blog Street|270|b| Norwich | 270|b|Norfolk |etc 1000002 |245 |a |Mrs Fredina Blogs |270|a|10 Blog Street |270|b|Norwich| etc
Each entry doesn't nessesarily have the same number of rows.
I would class myself as a beginner VBA bod, but the solution to this one is illuding me a present.
I've been inserting some rows in some sheets and everything is sound... Until I meet a chart! Charts in general are terrain I yet have to explore (and will be coming Monday)...
I have an excel file that contains about 1000 rows of data, from column A to O. Column C contains either the letter A or the letter I, A means Active, I means Inactive.
What I'd like to do is replace my monthly manual task of moving all the I's to sheet2. When completed, the excel file should have two sheets, all of the A's on one, and the I's in the other. The original excel file is not sorted by column C. The end result should have the same row 1, being the header row. There are some additional steps, to save the file to a specific location but I think I could do that once the excel file is formatted the way I wanted it.
