I need to move a number of rows, based on user input
in front of the first column, continuously until it 'flattens out' into one row..
And then do the procedure again for the next row
Kinda hard to explain.. maybe i'll use an example
using this matrix :
I'll try to be clear on what I need to do and hope I can find a solution.
I've found similar threads but I can not edit them for my use so I had to ask again. What I have is a lot of cows, calfs, heifers.
When a calf turns 12 months old , (ex: =IF(A3>11;move_row(sheet_heifers);"")), I need the entire row move to other sheet (heifers). and when the heifer gives births the first time (ex: column- =IF(A7<>"";move_row((sheet_cows);"" ) the entire row needs to move to other sheet (cows). I can do age calculating and the rest well.
I have data that is all in column A there are 8 pieces of information.
So client 1 info is listed from A2-A9, client 2 from A10-A17 etc. etc.
I set up A1-H1 to be the headers necessary.
How do I go about moving A2-A9 to A2-H2, then A10-A17 to A3-H3 etc. down through all the contacts which go down to A2400...
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies View RelatedCurrently I am using the Kickbutt VBA Find Function of Aaron, but I would like to have something that works more efficiently. What I currently do is (assuming all possible values for Column J are A - F):
Find_Range("A", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("B", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("C", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("D", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("E", Columns("J"), MatchCase:=True).EntireRow.Delete
although I just want some code that says: delete all rows except those that have "F" as content in Column J. I already tried something like:
Range("1:65536").Select
For Each cl In Range("J:J")
If cl.Text = "A" Or cl.Text = "B" Or cl.Text = "C" Or cl.Text = "D" Or cl.Text = "E" Then
Rows(cl.Row).Delete
End If
Next
but it also takes much to long. The major problem I think, is that the number of records is variable so I search the entire worksheet...
I have a worksheet which contains 2 columns which is needed to work my problem.
Unique Work ID and Description
The unique work ID are the same for each description, but there are up to 5 different description associated with each unique work id.
I'm looking for an automated process but where to start to convert the 5 rows in the unique row and 5 column for the descriptions
I am trying to develop a macro that does the folllowing
1) Takes the value from a specified column of a sheet in the workbook and sequentually go the the values of that column and compares those values to another sheet in the workbook
For ex: sheet1 in column A row 1 has string value abc123 and sheet2 column A row 1 has value 123abc. I want to compare these two values from different sheets.
2) However if the values don't match I would like to take the value from sheet1 and see if it is in the list on sheet2.
3) If the value from sheet2 isn't on the list from sheet1 then paste that row information to sheet3
So far this is what I have. All it does now is go through both lists and compares the values but I am not sure how to single out those values for conditional formating. I am sure that the singled out values will need to be derived dynamically since I won't know what or when the values will be up for conditional formatting.
Dim LoopCount As Integer
Dim RangeCount As Integer
Dim CellVal As String
Dim CellIncrement As Integer
Dim ErrorCount As Integer
Dim PasteConfirm As Boolean
[Code] .........
I am working on the attached price proposal and need my user to be able to enter a number into column E indicating that that row should be printed on the quote. The 'quote' can be new sheet or another area of current sheet that is formatted to look like letterhead.
View 4 Replies View RelatedI have these specific rows (2,3,4,6,43,44,45,63) which I would like to copy and paste it on a designated sheet. But my problem is, the column varies depending on the YEARS.
I do have codes for it, the one I got from the recording. I just do it for all of the rows (formula pasted here) until all of it copied on the summary sheet. However, when I finally finished it and I run it. I could see the movement form One Sheet to another and its not good.
A code that I could use for my better understanding of MACRO.
I have some specific procucts in coloum A in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
On Error GoTo Err_Execute
'Start search in row 1
LSearchRow = 1
[Code] ....
Err_Execute:
MsgBox "An error occurred."
End Sub
I have some specific procucts in coloum A(a2, a3, a4, till a50) in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
[Code] .....
I need a code that will go thru column C and delete the whole row if cell value is 78315, Also it needs to shift the the rows up so there is no empty rows wheneverything is done done. I used some codes but they take forever to go thru whole sheet.
View 4 Replies View RelatedIs there a VBA code I can use that will delete all rows that contain "ABC" or "YXZ" or "HHH" in column A ?
View 2 Replies View RelatedI have a 14 column report with a dynamic range of rows. In Column A, there will only be one cell that contains the text "Added Sections:".
I need to highlight, 10 whole rows up to the 14th column, after the cell that contains "Added Sections:".
I have a dataset that i want to update, to do this I want to insert 8 rows after each row that has a value in Column C 2000. The set has 600,000 rows, comparing countries (cty, cty2) from 1980-2000. I want to make room for information up till 2008. I see lots of codes for doing this but I will also need help with actually inserting into my spread sheet.
View 3 Replies View RelatedI have the attached a workbook (& the code) which merges the worksheets from 7 different workbooks together into a 'Raw data' worksheet in my master workbook. It is driven off a parameters table which allows you to select which workbooks/worksheets you want to include in the merge. - The code works fine however when it is copying the data from each worksheets it is just copying all the data as a 'block' copy where I need it do do it row by row becuase I dont want to copy the row if colum C in each row contains no data, ie. it is blank.
So in my code I need another loop which will: Copy data from column A - E for each row if column C is not blank. Paste into Column B - F in Raw Data worksheet (as column A contains the source filename) Loop until it reaches no more data. I adeeally just want to copy the specific range as above, not the whole row but either will do. This is my code, refer to attachment too which includes master workbook and an data entry workbook where the data comes from.
Sub OpenWorkbooks()
Dim Book_Name As range ' List of available books
Dim Sheet_Name As range ' List of available sheets
Dim dLastRow As Long
Dim oLastRow As Long
Dim sLastRow As Long
Dim DestinationSheet As Worksheet
Dim SourceSheet As Worksheet
Dim WorkBookList As range
Dim WorkSheetList As range
Dim WorkbookPath As String
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
'set source and destination sheet
Set DestinationSheet = Sheets("Raw Data")
Set SourceSheet = Sheets("Parameters")........................
I'm attempting to write a macro that will select all the rows which contain a value in a specific column. Say for example, all the instances of "test" in column C, I need to select the entire row with that value in the column.
I should also mention that by using an autofilter, only specific row numbers are selected. The source spreadsheet is dynamic and will not always display the same value in the same row, and thus I need something a little more adaptable.
I want to delete any/all rows from a worksheet (named UK) which have the word "VAN" in column P. I have tried using a 'For Each... Next statement' in a macro, but always get a debug box "Run Time Error '91' Object variable or With block variable not set". What am I doing wrong? my code follows
Sheets("UK").Select
Dim cell As Range
For Each cell In Worksheets("UK").Range("P10:P200").Cells
Cells. Find(What:="VAN", _
After:=ActiveCell, _
LookIn:=xlFormulas, _
LookAt:=xlPart, _
SearchOrder:=xlByColumns, _
SearchDirection:=xlNext, _
MatchCase:=False, _
SearchFormat:=False).Activate
Selection.EntireRow.Delete
Next
I have in sheet1 a column "A" with random dates in this format x/x/200X.This sheet is constantly updated with new random entries as more information arrives.
So, how can I use a formula to automatically move to sheet2 "only" the rows with dates for JANUARY. I know that I can move data using e.g....=sheet1!A1, but I don't know how to use this formula with an specific condition to move the rows with JANUARY dates only.
In the attachment, you can see how I would like to move "only" the rows with JANUARY dates to sheet2.
I have two worksheets. On one worksheet under column G I have hundreds of random numbers, but I only want to extract a specific half. In the second worksheet I have two columns A and B. Column A has the exact numbers that I want to extract from Column G. I would like to get the numbers from Sheet 1 under column G listed under Sheet 2 Column B in reference to Column A.
View 9 Replies View RelatedI am trying to have rows moved from (Schedule) to (Complete) in the attached workbook. The criteria to have the row moved would be the user-selected "Status" list changing to "COMPLETE" in Column G.
I would like to have the row cut and deleted from Sheet4 (Schedule) once "COMPLETE" is selected from the list in Column G with rows below moving up. The row would then be inserted into Sheet2 (Complete) at the top of the list (Row 7) and rows would move down below the new entry. I would also like to have the formatting remain uniform (every other row fill)
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I have code that has the user identify a file and then it puts that file location in a cell within the workbook
"Y:MastersProPricerENG WBS BOEXYZ.xlsx"
I want to copy a tab from the active workbook ("Resources (Spread or Load)") and move it to the workbook listed above.
I have a sheet in excel 2013
In column "Y" I want to add a checkBoxs activeX from cell 6 until cell 500
I don't want to repeat it 500 times )":
This is my code for a single checkBox
[Code] ...........
I want to count the number of rows in a specific column up to an empty cell and assign this value to a cell. I don't want to count the total number of rows but instead I want the number of the first group of rows.
For example, column A may have cells ranging from row 2 to 10 and then from row 12 to 20, so I only want to count the first group.
The below code counts the total which is not what i need.
Code:
Sub test()
Dim Mycount As Single
Mycount = Application.Count(Range("A:A"))
Cells(1, 4) = Mycount
End Sub
I am not the best at this, but we recorded a macro and we want to delete whole rows after we 'control' find something from a specific column. WHen we recorded our macro, it finds the first instance and we hightlight the whole row and 'control' 'shift' 'end' and delete all of the rows. We did this because we sorted and made sure the information we wanted to delete was at the bottom of the worksheet. we realized that each day the spreadsheet we pull from an ip address gets bigger and the row that we started from to delete starts on a different row each day. How do we get all the information to delete everyday, even when the row that Owned starts on changes? ...
View 9 Replies View Relatedremoving duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
[URL]
I have a workbook which serves as a master database at work. it contains two sheets: current residents of our facility (let's call this Sheet1), and those that have left/been discharged (Sheet2). It contains 87 rows and 34 columns of info.
I'm looking for a macro that will do the following:
When I click on a cell in any row (i.e. I need relative references) on Sheet1, the macro will (once activated):
1. Select the info between column D and column AH (inclusive) on the row where the selected cell is... i.e if I click on cell F4 before the macro is started, it will select the info from D4:AH4.
2. It will COPY this info
3. It will paste the info into the first empty row on Sheet2, starting from column C (i.e if the first empty row is 200, it will paste the info from C200:AG200)
4. It will then have a popup asking for: a. 'Date Left' and b. 'Reason', with two empty fields to input the info into. 'Date Left' is (obviously) a date value and 'Reason' is a text string. Once OK is hit on this popup, the Date Left will be pasted in column A of the same row (in our example, A200), and 'Reason' will be pasted into column B (again, in our example B200).
5. The macro will then go back to Sheet1 and delete the info that was selected between Columns D and AH inclusive (in our example, D4:AH4)
6. The macro will then save the workbook.
Have developed a form for my associates and want them to be able to move to the cellls I want them to fill data in to by merely hitting the TAB or ENTER key vs. having to move the cursor to each cell requiring them to input data.
Want cursor to move in a specific cell order. You would think you could merely say 1M, 2C, etc.
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?