Moving Rows Of Data To Another Sheet With Vba
Feb 3, 2010
I have an excel file that contains about 1000 rows of data, from column A to O. Column C contains either the letter A or the letter I, A means Active, I means Inactive.
What I'd like to do is replace my monthly manual task of moving all the I's to sheet2. When completed, the excel file should have two sheets, all of the A's on one, and the I's in the other. The original excel file is not sorted by column C. The end result should have the same row 1, being the header row. There are some additional steps, to save the file to a specific location but I think I could do that once the excel file is formatted the way I wanted it.
View 4 Replies
ADVERTISEMENT
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
View 9 Replies
View Related
Nov 29, 2006
I'd like to write some code to do the following: When the first cell of the row contains an "Y", move the entire row to another sheet (in the same file), keeping in mind that this sheet already contains some rows (so add the row on the first empty row in the sheet). Afterwards the original sheet contains no longer any rows in which the first cell is filled with an "Y".
View 4 Replies
View Related
Aug 3, 2014
I have an action tracker which works almost as I want it to. The actions are on the first sheet and once the status column changes to complete then it copies the row to he complete sheet and clears out the action sheet. I have two problems. The first is that I want column 2 to be the entry date but this comes up with an error so I masked out this part of the VBA as below. The second problem is that if I change the state to say "on Going" and then change to complete then it does not copy but if I close down and reopen, it shows complete but when I change to complete again then this time it copies and removes. Is there a way to make it loop so as soon as it says complete then it processes.
I have attached the sample workbook : Actions list_v2.xlsm‎
[Code] .....
View 2 Replies
View Related
Feb 21, 2007
My knowledge of Excel is quite basic, so i had little luck searching for this one.
We have a main data sheet in which everything is inputted, but i would like that data to be split up and reported (copied into) in 2 or 3 other sheets, depending on a single criteria.
Is this able to be done so these 'report' sheet are constantly updated, and the columns in the reports dont include irrelavant columns which are in the main data sheet.
View 14 Replies
View Related
Apr 16, 2014
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
View 5 Replies
View Related
Sep 23, 2013
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies
View Related
May 20, 2014
I'm essentially getting a lot of data at the moment, which has a few orders people have made on my website.
Essentially, think order id, address etc and then all the products the customer has ordered.
However, the part which includes what the customer has ordered creates multiple rows of data, with the order ids etc duplicated. What I need to do is consolidate this into 1 row. So to add additional columns instead of rows.
The reason fro this is I want to mail merge the data into an invoice and mail merges work of 1 line of data at a time. I've attached an example, any way to do this?
(Attached to this post / or linked here: [URL] ....)
View 1 Replies
View Related
Jul 11, 2012
What vba code would I use to move data from rows a and b in sheet 1 to sheet 2. preferably with a button if possible.
View 2 Replies
View Related
Jan 26, 2007
using visual basic on excel and im after some code for a macro to be assigned to a button in a workbook that will do the following task:
1. In sheet "Main Page" Select rows between A4 and D100 that have anything in column C.
2. Copy the data in these rows and paste them in sheet "Invoice Page" in rows below and including 4 without leaving any empty rows, although there might be rows that dont contain data in column C in the first sheet where they are being copied from.
View 9 Replies
View Related
Jul 26, 2009
I have created a spreadsheet with 4820 rows of data (4821 for computational purposes, the last row being blank) with 5 columns.
1. every third row is blank and it needs to be removed (3, 6, 9,...4818, 4821). Once this is accomplished,
2. I need to move the data that is now found in the even rows, column E moved to the above, current odd row, column F. (ie. E2 to F1, E4 to F3, E6 to F5,...E4808 to F4807...,E4820 to F4819 (however it won't go this high). then
3. I need to delete all the current even rows, as the data I need will be in the odd rows.
View 4 Replies
View Related
Sep 24, 2009
I have the following spreadsheet with 4 columns of data:
1000001245aMr Fred Blogs
1000001270a1 Blog Street
1000001270bNorwich
1000001270cNorfolk
1000001270eNRx x99
1000001270gThe Manager
1000001270k01603 555 555
1000001270l01603 555 555
1000001270qManager
1000001270xN
1000001270yN
1000002245aMrs Fredilina blogs
1000002270a10 Blog Street
1000002270bNorwich
etc etc for about 36,000 rows.
What I need is for each unigue reference ID (column A),
I need all corresponding data moved up into a single row in serperate columns, something like this:
1000001 |245|a|Mr Fred Blogs| 270|a| 1 Blog Street|270|b| Norwich | 270|b|Norfolk |etc
1000002 |245 |a |Mrs Fredina Blogs |270|a|10 Blog Street |270|b|Norwich| etc
Each entry doesn't nessesarily have the same number of rows.
I would class myself as a beginner VBA bod, but the solution to this one is illuding me a present.
View 6 Replies
View Related
Jan 9, 2008
I have data that is all in column A there are 8 pieces of information.
So client 1 info is listed from A2-A9, client 2 from A10-A17 etc. etc.
I set up A1-H1 to be the headers necessary.
How do I go about moving A2-A9 to A2-H2, then A10-A17 to A3-H3 etc. down through all the contacts which go down to A2400...
View 9 Replies
View Related
Jun 16, 2009
I want to have a four sheet database for a client list. Sheet one would be the "master sheet" and will have a column that has a validation drop down with the values "current client", äctive prospect",""dead deal", etc. I want the information from the master list to automatically move to the corrisponding sheet(s) when the validation is chosen.
View 9 Replies
View Related
Aug 28, 2009
how to work across sheets in the same book.
I want excel to recognise text strings in one column and depending on that value, copy the whole row to a corresponding sheet (could even just make do with one extra sheet rather than one for each of the 5 values)
View 9 Replies
View Related
Apr 13, 2007
I am constructing a database where i need to transfer data from one sheet to another constantly. Assume I have column A in sheet 1 listed with names, and column B in the same sheet listed different dates and colume C in the same sheet displaying today's date.
Wht I want to do is when Dates in Column B has expired today's Date (13/4/2007 > 1/4/2007), I want the entire row transfer to Sheet 2 A3, with the original row in Sheet 1 deleted. If there are multiple rows in Sheet 1 expired, i want them transfered to Sheet 2 starting from A3, follow one another. The new data transfered to Sheet 2 will then be high-lighted in Red color.
View 2 Replies
View Related
Dec 12, 2008
I have address data all in column A (each paret of the address is on a separate row) which I need to move to separate columns on one row for each address:
ie:
Mr Bloggs (row 1)
123 The Avenue (row2)
The town (row 3)
The postcode (row 4)
Mrs Smith (row 6)
456 The street (row7)
The postcode (row 8)
needs to be: (I have used || to indicate different columns)
Mr Bloggs || 123 The avenue || The town || The postcode
Mrs Smith || 456..... || .......
The problem you see from the above is that they are not always consistent ie. the postcode (zip) isn't always 3 rows below the name for example. Also although generally there is a blank row between each record (this may sometimes be 2) and equally there may also be times when there is a blank line in the address.
Any ideas on how to do this.... I have 1000's of records and really can't afford to go through each one making it consistent before moving it to columns?
View 7 Replies
View Related
Jun 29, 2014
Any macro capable of moving data from multiple row to a single one i have attach a sample file before and after ...
View 4 Replies
View Related
Jan 7, 2010
This is similar to a previous post, in July, which was masterfully solved. I have tried to adapt the previous script, without success. Therefore,
I have copied data from a screen and entered it into Excel 2007, which is attached as 'snohomish sample.xlsx The data starts out (sheet 1) in 8 columns (A-H), and only in the odd rows (1, 3, 5, ...) What I wish to do is the following:
Move 'sheet 1 column B' to 'sheet 2 column A'. This is a date which needs to be in mm/dd/yyyy form.
Move the last 14 digits in 'sheet 1 column F' to 'sheet 2 column B'. This needs to be text so that I don't loose any of the zeros.
Move 'sheet 1 column E' to 'sheet 2 column C'.
Leave 'sheet 2 column D' blank as I will be entering a currency amount after running the module.
Move 'sheet 1 column A' to 'sheet 2 column E'. This also needs to be text as I can't loose any zeros or have it in scientific format.
The rest of the data on sheet 1 is not needed on sheet 2.
I will be entering data in 'sheet 2 columns F-K' after running the module.
I am attaching 'snohomish results.xlsx' which shows what I hope the results to look like (note the sample results are on sheet 1 of a different file).
View 6 Replies
View Related
Jun 17, 2009
I have a database that holds client information in columns A through J. I need that data transfered to sheet 2 or 4 depending on what choice is picked from a validatin list I created in column K. The list is either "booked appointment", or "not interested." I would like "booked appointment" data to move to sheet 2, and "not interested" data to move to sheet 4.
View 9 Replies
View Related
Oct 3, 2012
I am using Excel 2003.
I have 2 worksheets.
Worksheet 1 is called "Master List Data". Every cell within this worksheet contains a formula so that it matches the cell value contained in a worksheet held within another workbook.
The formula for reference is as follows:
=IF('[CCL Breakdown.xls]MASTER LIST - Active Customers '!A1="","",'[WFX CCL Breakdown.xls]MASTER LIST - Active Customers '!A1) .
e.g.
If Cell A1 on Master List-Active Customer contains no data, Cell A1 in Master List Data would be blank.
If Cell A1 on Master List-Active Customer equals John Smith, Cell A1 in Master List Data would display John Smith.
There are currently non-blank values contained in cells A4:A750. But next week there may be non-blank values is cells A4:A790 (i.e. it will grow each week)
Worksheet 2 is called "Master List Flat. At the moment, I am manually copying and pasting the rows which have non-blank values in cells from Column A from Worksheet 1 into this report (e.g. A4:IV4).
I would like to automate this process and I have created a Macro, but I do not know how to word it so that it will only copy cells with actual data in.
The Macro I have written is below:
Sub IMPORTANDFLATTENDATA()
'
' IMPORTANDFLATTENDATA Macro
' Macro recorded 01/10/2012 by walesb
'
'
Application.ScreenUpdating = False
Sheets("Master List Flat").Select
Rows("4:759").Select
[Code]....
View 1 Replies
View Related
Nov 26, 2013
import it into to Stata to do statistical analysis. I always receive spreadsheets like this:
country
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
[code].....
and I have to manually reorganize it like this to import into Stata:
country
year
value
Benin
1991
20
Benin
1992
254
[code].....
Is there way I can quickly design a macro to do this? The problem is that I generally have a list of about 60 countries, and years from 1991-2011. So, it's really time consuming copying the column of data corresponding to the year, pasting below, repasting the list of countries and the years...then again..then again...then again...I'm using Excel 2010.
View 7 Replies
View Related
Jun 24, 2014
I have a worksheet which contains 2 columns which is needed to work my problem.
Unique Work ID and Description
The unique work ID are the same for each description, but there are up to 5 different description associated with each unique work id.
I'm looking for an automated process but where to start to convert the 5 rows in the unique row and 5 column for the descriptions
View 8 Replies
View Related
Feb 28, 2014
Is there a way I can compare sheet 1 Column A, with sheet 2 Column A, and then move any duplicates from sheet 2 over to sheet 3.
For instance,
Employee Numbers that match in both sheet 1 and 2, remove that row from sheet 2 to and insert it into sheet 3.
View 5 Replies
View Related
Jun 10, 2013
I'm trying to create a .cvs file from an exported excel report, but before I can import it to a database I'd like to have one row per record.
I've already omitted out the headers and footers blank spaces and unnecessary columns from the excel file and I needed to just combine multiple rows into one.
It currently looks like this:
ROW#(1), ID#(1), NAME(1)
ADDRESS(1), ZIP(1)
DOB(1), SOURCE(1)
ITEM(1), CITY(1)
ROW#(2), ID#(2), NAME(2)
ADDRESS(2), ZIP(2)
DOB(2), SOURCE(2)
ITEM(2), CITY(2)
and so on..
I'd like to make it like
ROW#(1), ID#(1), NAME(1), ADDRESS(1), ZIP(1), DOB(1), SOURCE(1), ITEM(1), CITY(1)
ROW#(2), ID#(2), NAME(2), ADDRESS(2), ZIP(2), DOB(2), SOURCE(2), ITEM(2), CITY(2)
and so on...
I can't figure out a macro or a way to do this automatically.
View 8 Replies
View Related
Jul 22, 2014
I want to be able to paste the large amount of data I get each day into the first sheet in my workbook ("data dump" sheet), the data will be formatted in the way i have used in the example workbook.
I then would like to be able to just have to enter 2 values into columns A and B of "1st output" sheet (Label in A, and Item in B), then have it look up the data that corresponds to those 2 values that are both in the same row in the "data dump" sheet, and have it copy and paste all of the relevant data in that row into the row in the "1st output" sheet.
The data I would want excel to find and place for me in the first sheet is highlighted in yellow
As a way of keeping track of this every day, I then need the data from the "1st output" sheet, to be fed into the "2nd output" sheet. This sheet would have all of the peoples' names already in it, but would just need to look in the "1st output" sheet for references to these names. If one of the names pops up, I'd need the date shown in the row of that instance to be placed after their name. This will allow me to keep a log of how many times their name gets flagged up, as well as the dates on which it happens. Again, the data I'd need excel to look up in the "2nd output" sheet is highlighted in yellow.
If there was a way of having the 2nd sheet add new names it finds on the 1st output sheet, that aren't already referenced on the 2nd output sheet in column A, that would be amazingly handy if it could then enter that name into column A and start a new row for them
Example file :
Attachment 334122
Alternative link [URL]
View 1 Replies
View Related
Jul 3, 2014
Currently, Im running a button macro. When this button is clicked, the table from "315 Employee Data" will copy the names from column C to "315" sheet B12 onwards.
Now, what i want is when I update the employee data on "315 employee data" sheet, I want "315" sheet to automatically match the names from "315 employee data", delete and add names when I add or remove employees from the column the next time i click on that button again.
After the above is achieved, when i add new employees,run the macro and it displays the updated list of names, I want "315" sheet column A to do automatic numbering.
I have attached the file for your reference.samplesample.xlsm
View 2 Replies
View Related
Oct 8, 2009
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
View 9 Replies
View Related
Jul 30, 2013
I have a workbook, "Assessment District" with 3 worksheets. In worksheet "Original," I have 252 rows with columns A-V. I want to copy two coloumns "C" (range 6-252) and "N" (range 6-252) from the worksheet, "Original" into a new worksheet titled "Send" in columns A & B. I only want to copy the two columns "C" and "N" for each row, if column Q does not contain "beach town" or "freeway."
For example, row 6 contains beach town, so I wouldn't copy C6 and N6 onto "Send," but row 100 doesn't contain beach town or freeway, so I would copy C100 and N100 into "Send."
This is a workbook that would be updated annually.
I'm not skilled in VBA at all, but want to impress my supervisor where I'm interning.
View 3 Replies
View Related
May 22, 2008
I have a dropdown list with names of different people: Bob, Jane, Joe, et cetera. I also have tabs at the bottom (sheets) for each of these people. Is it possible that when a name is selected from the dropdown box in column D, say Bob, the whole row (row 10 or whatever) is cut from main sheet and put into Bob's sheet, then the row is deleted from main sheet? If this doesn't make sense (because I stink at making sense), just let me know and I will try to clarify
View 14 Replies
View Related
