I have a multicolumn (3 columns) listbox that is filled from a sheet (ProductList). Col1=product code (column A); Col2=description (column B); Col3=prices (columnC). I fill it when the form loads like this:
VB:
Dim rng As Range
With Worksheets("ProductList")
Set rng = .Range(.Range("A2"), _
[Code]....
Im trying to add coloumn heads to my listbox but its just not working
i was using rowsource to use the first row of the sheet as the headings however this just set the values in the listbox to the rowsource. Here is my code
If Area = "" Then
Dim c As Range
Zip = "*" + Zip + "*"
Me.ListBox1.Clear
For Each c In Range([e2], [e65000].End(xlUp))
If UCase(c) Like UCase(Zip) Then
With Me.ListBox1
.AddItem c
.List(.ListCount - 1, 0) = c.Offset(0, -4).Value
.List(.ListCount - 1, 1) = c.Offset(0, -3).Value
.List(.ListCount - 1, 2) = c.Offset(0, -2).Value.....................
I have attached my Excel File with the userform I am trying to do. What I am trying to do is change the table in the listbox based on the selection of the combobox and then my selection in the listbox will pass the selected values to Range A1:C1.
Excel 1.xls
I want to fill two Combobox (cmb 2 and 3) dependent on what the user has chosen in a first ComboBox (cmb1).
The first combobox ist based on on the first sheet, and the second and third combobox shall be filled with values from other worksheet corresponding on combobox 1 selection.
I attached a xls to this post to explain better.
Basically I have a column filled with names (A) that the combobox is filled with, I then have a text based inputbox and a submit button. Right now the submit button transfers the data from the inputbox to the same row depending on the combobox choice and edits the existing text which is fine.
However I also want the data to be submitted to another sheet where the data is not edited but added.
Example: I choose James from combobox and writes 10 in the inputbox, the submit button will then edit the existing value on the "Data Edit" sheet on the row James and add the value to the row James on the "Data Add sheet".
This is the edit code, I basically just need some pointers as to how to add data to blank cells in corresponding rows according to combobox selection.
[Code] .....
Attached File : Combobox Row Add.xls
I would like to add a combobox and would like to add/delete items to the list box.
View 9 Replies View RelatedI have a form in which a user pastes test names into a certain column of a spreadsheet. I have a listbox (not an ActiveX control) where I want the tests to be displayed. I want to resize the listbox depending on the number of tests pasted in-depending on where the last row is in this column of test names. Is there a way to do this automatically when the user pastes a new test set in the spreadsheet?
View 2 Replies View RelatedAttached is my sample data.
In sheet "support data" I have two columns.
One column is a client reference and the one next to it is a client name.
On my form the combo box is populated with the client references.
When i select a reference in the combo box I would like to populate textbox1 with the corresponding client name from "support data"
(as an advanced feature it would be good if the textbox1 kept changing as the mouse was hovering over the list of client references in the combobox)
i had a user form with a Combo box,list box,text box and a command button. I need the code that works upon selecting:
1)An Item from the combo box should display the list in the list box.
eg: If Country is selected from the combobox then the list box should contain all the names of the countries from the country Column
2)An item should be added to the list in the worksheet when an item is entered in the textbox.
Like wise, when an item is selected from the combobox from "Delete Items List" all the items relating to the item selected from the combobox should be displayed in the list box and a choice to delete the items relating to the combobox item should be provided.
I must be overlooking something. Apparently, there is some difference between comboboxes and listboxes that I was not aware of. When I use the following code to populate a listbox, it works perfect:
Private Sub UserForm_Initialize()
Dim GrowerData() As String
Dim GrowerRange As Range
SheetTwoLastRow = Worksheets(2).Range("A2").End(xlDown).Offset(1, 0).Row
I'm attempting to add the values for a combobox and (2) text boxes to a list box on a form. The list has 3 columns. When I run code to add to the list box the values are added on separate rows instead of the same row. See code below and attached screen shot.
VB:
Private Sub cmdAddToList_Click()
Dim i As Integer
Dim iRow As Integer
If Me.cboParts.ListIndex = -1 Then Exit Sub
For i = 0 To Me.lstParts.ListCount - 1
[Code] ....
UserForm3.jpg
Is there a way to filter a listbox from the selection in a combobox?
View 2 Replies View RelatedHow do we populate a List Box based on two Combo Box Selection on a userform?
Sheet2 has 5 Columns of datas all the way down...
Combobox1 is the Column A
Combobox2 is the Column B
I want to create a userform that selects a Staff members name from a combo box, once selected the listbox would then display what time off that person has taken - ultimately I would then like to be able to select a date taken and either edit or delete it from the sheet that holds the information.
View 7 Replies View RelatedI'm trying to use 2 combobox's to filter a listbox with 7 columns. I need to match the 1st 3 chars. and the last 2 chars of the 1st column field to filter the list that displays in a listbox on a form. Is there an easy way to do this? I tried working with the autofilter, but couldn't get rid of the dropdown selection arrows.
View 2 Replies View RelatedI have created a userform to keep track of "Customer Call Cycle".
This is what I have:
1) I have 3 Sales Reps with 50 Customers each.
2) Each customer has multiple contact persons
I have a userform with 2 combo boxex, 1 list box, 1 textbox and 2 buttons.
I want to be able to select Sales Rep from the 1st combobox which will automatically populate the second combobox with customer names related to that sales rep.
and when I select a customer name from 2nd combobox, I want all the contact persons in the database that are related to that customer name to populate in the listbox.
My table contains 26 columns, I have Column E header as 'Assignee' and Column J for 'Date_Closed'.
I have a form containing a combobox and a listbox. The combobox is populated with 10 Assignee Names.
I want the listbox to be populated with all rows containing the selected Name ONLY if Date_Closed column (J) is blank/null.ie.date not filled yet.
For example, if i select "Ann", the listbox will show all rows in the table that have Assignee Ann for and closed date is still blank.
Attached small application. Open the application and click on the LISTBOX button. Code for the Filter by Item button or the Filter by Representative button. I would like to select an item from either of those dropdowns in the search box, click on the relevant button and the list box will populate to show the results.
For example, if I were to select Chocolate Bars from the dropdown and click filter by item, I want to see only the three lines [i.e. line 2, 6 and 7] present in the listbox, and I want to be able to doubleclick on any of those lines to go to the record if I wish.
Similarly, if I select Robert from the other dropdown and click Filter by Representative, I want to see the relevant three lines [i.e. 4, 5 and 8] relating to Robert, present in the listbox, where I can again double click to go to the record [i.e. the data entry userform related to particular record selected.
I have attached a file : Form.xlsm
I have a userform where I want the user to be able to select multiple options, but am having a bit of a problem finding the best way to do this. If I use a combobox, I don't appear to be able to allow multiple selections, but if I use a listbox I don't appear to be able to implement a dropdown facility. I would prefer to have a single line sized box on my form, but doing this with a listbox would probably be confusing for the user as it is not very easy to see what has been selected.
View 11 Replies View RelatedIf Sheets ("Sheet1").Cells (i ,"D").Value="January" Then ...this is my code line.I would like to replace my criteria"January" with a listbox or combobox with months names so that my out put results vary according to my list selection from the combobox., so that I need not to change or edit my criteria value every time according to my requirement.Is it possible in vba?
View 4 Replies View RelatedI have been able to create a userform that allows users to fill out a form without the need to navigate throught the excel spreadsheet form that has been created. to further refine this I am trying to use either a list box or Combobox to display specific items for certain cells, ie Travel Method (Air / Rail / Other), or Department (Projects / Finance / Engineering / Admin etc). I can create these in a spreadsheet without to much problem, but sofar have been unable to get them to work in the user form.
View 2 Replies View RelatedMy table contains 6 columns, one of which is 'season'.
I have a form containing a combobox and a listbox. The combobox has 4 options (spring summer autumn and winter). I want the listbox to be populated with all rows containing the selected season. For example, if i select "spring", the listbox will show all rows in the table that have spring in the season column.
I realise this is a very remedial question but i am very new to VBA and programming in general!
The code for sorting a multi-column listbox in Retain Selection After Sorting ListBox was really good, and I've used it a lot in an application I'm building.
What I'm hoping to do is reload a listbox in such a way that the items appear in the same order they were previously in. I'll describe two scenarios:
1. User edits a record
- user sorts listbox
- user selects a record
- user edits record
- listbox reloads, unsorted
2. User adds a record
- user sorts a listbox and sees a record is missing
- user adds the missing record
- listbox reloads, unsorted
ideally the last step for each would be "listbox reloads, sorted" and the user would go on down the list. the tricky part i think is when rows are deleted or added.
i'm starting on a solution, but if there's some existing code that will do this i'd appreciate if someone could point me to it (because, for example, the listbox sorting code i referred to above anticipated things i did not).
How can I fill a UserForm ComboBox or ListBox with cells from a dynamic changing range?
View 3 Replies View RelatedI have a listbox that is populated via a macro. I can not use ColumnHeads so I populate line 1 in listbox as a header. The user can click on any line to open another box with more in depth data, I want to restrict the user from clicking on line 1, the header.
I have tried using listbox.listindex=1 whenever listbox.listindex=0 in mousedown and keydown but it fails to work although placing listbox.listindex=1 in the form initialisation sets line 2 as default when it opens.
im trying to create a two column listbox that will transfer both columns to the listbox on the right and also transfer from the right to left currently right to left works but when I trasnfer from the left to right then the right to left only one column is moved.
View 4 Replies View RelatedI have a list box in the userform. I would like to add items into ListBox which correspondent with 4 combo box values. If all combo boxes is selected, that would be easy task. However, user might not need to select all combo boxes. If any of the combo boxes empty, my code fails that end up listbox is empty. I could write the code with all of the combinations, but that will be my last choice if there is nothing easier than that. Can I adjust the code such as if the combo box="" then skip then look at the other combo box if that is "" than skip again. If all combos are "" add all the items from the source.
My code is below:
AllStaffLB is listbox
StaffSrchCB is combo box
StaffSrchCB2 is combo box
[Code]....
I have a form that an administrator will open to search for items needing approved (ie. status is "Submitted" and they'll be going in to confirmit). The datasource is a table. For these purposes I'll arbitrarily call it Table1 for ease. There are multiple columns in the table, and I'll set the column width to "0" for those I don't want displayed, so we'll call the columns to be displayed Col2, Col3, and Col22. There are two dependents, because Col2 is the Division, of which there are 3 (Central, East, and West). The administator will select their Division and the associated ListBox will display results for all locations having a item status of "Submitted". Col3 will be the branch name, and Col25 with be a total $ amount of the order. Cbo1 (ComboBox1) will house the Private Sub Change() for the macro after a division has been selected.
Thus far I have thought of using a loop such as:
Code:
Private Sub ComboBox1_Change()
For n = 1 to ws.ListObjects(1).DataBodyRange.Rows.CountIf ws.ListObjects(1).DataBodyRange.Cells(n,2) = Me.ComboBox1.Value and ws.ListObjects(1).DataBodyRange.Cells(n,25) Like "*Submitted*" ThenMe.ListBox1.AddItem = If ws.ListObjects(1).DataBodyRange.Rows(n).Value2End IfNext n
End Sub
I've got a mismatch in the the Value2 type for the .AddItem. Not sure how else to approach though.
I have searched the forum but can't find an answer to my problem. I have a list of about 3000 streets, a sample of which follows:
ARBROATH ST
ARCOLA ST
ARGO PL
ARIES PL
ARMSTRONG AVE
ARTHUR AVE
ARVIN CT
ASHGROVE CR
ASHLEY GROVE CT
ASHWORTH AVE...................
I know how to populate a List Box, but rather than having to scroll through the entire lot I would like to just have to type in a few letters and the output only display streets that start with only those letters. For example, if I type in AS only the following appear in the listbox.
ASHGROVE CR
ASHLEY GROVE CT
ASHWORTH AVE........................
I need to populate a worksheet's rows with values from 2 comboboxes and a listbox which can have multiply selected items. After finding the row's last free cell, I have the listbox values properly populating correct column. However, I not sure how to get the corresponding combobox values assigned to the appropriate columns.
View 2 Replies View Related