I Want To Use User Form to add data with multiple condition........
1st condition : select name, AHSAAN G, ALI G, SHAHID G.......
2nd condition : select , ONFLOOR BC, ON FLOOR VC, ON LINE VC
3rd condiotn : select, PT P2 P3 PB HR LK
In this use form the i used define name "name_1"
1 = I Added this to combobox 1. if if a aded a new name who is not in the list "name_1" then he asked for added this name or name. if i click yes then added the name in "name_1" list.
2 = When i added the data to my sheet by default all field of UserForm don't blank....
Creating a working userform that takes data input from the user and puts it onto a spread sheet.
That data is then used to calculate a result (via the spreadsheet), and I want that result to show on the userform when the data is submitted (if that makes sense?)
So I have a workbook (Workbook1) that opens a userform on launch. I have another workbook (Workbook2) that has a button to open Workbook1. Upon opening Workbook1 (and as a result the userform) I'd like to input data from Workbook2 into the fields of the userform. I'm not exactly sure how to reference the userform fields to input data from Workbook2.
I'm trying the following code:
Workbooks.Open (Workbook1)
With Workbooks(Workbook1).Userform1 UserformField1 = "Billy" UserformField2 = "John" End With
The macro is opening Workbook1 and the userform but the fields return blank.
I have been able to make a excel sheet which takes inputs from userform for First Name, Last Name, Address etc. I have included a duplicate check for column "B" for "First Name". This checks if any existing data is already which matches the new data input for "First Name" through userform.
The userform only checks for the "First Name" check as required and gives a message that duplicate has been found. Then I have to close the userform and do a Control Key+F ( to find the new name for example, James) in excel sheet and validate that new name is same or different from existing name "James". This I want to do since this new name "James" may be another "James" as his "Last Name" is different. So even though First Name is same, since Last Name is different I know they are two different persons. In that case I will add the entry manually in sheet, instead of userform, since I would not be able to input the new data for "James" since the duplicate check with the current code will not allow me to do so.
What I am current trying is -
1. If the new name say "James" is entered through userform, then excel should point me to the existing row where the record for existing name "James" is there, say row 4.
2. Now without closing userform I should be able to see in the background excel sheet the search results for "James", as excel is pointing to that now. There may be multiple "James" in the existing which should be pointed out.
3. Based on the results that I see in the background excel sheet I can now decide that, this new name "James" is different from old "James" (of row 4) since his Last Name is different. Accordingly excel code should then ask me to add this record or discard this new record.
4. Duplicate check for First Name is enough for me. I would not require "Last Name" duplicate check.
I hope I have been able to explain my problem. I have also attached my current code as I am not able to attach any sample test file.
When one creates multiple UserForms with multiple (identical) TextBoxes, every control must have its own event handler procedures. All these TextBoxes in my workbook are to capture numeric data to populate various cells in the workbook.
Would you recommend using a Class Module to handle these events for TextBox controls, rather than having to repeat the event handler code for each control?
And if so, do you have some code that I can use that will cover most of the events and potential error handling routines for numeric input data?
Is there any way to have an editbox that when i write a value on it ex: 10 to write this value to A1 when i am pressing the enter button and delete the value of the editbox afterwards when i enter a new value on it to write that on A2?
I am building a shared workbook that will have the same data on multiple worksheets.
The problem is that users are going to be entering updates to that data on individual sheets, not going thru and updating each sheet.
Also, some of the updates will be themselves updated as the day goes on.
What I need is for the workbook to only use the most recent data/update on all of the sheets.
Example: Sheet1 will have all of the info sorted by time. Sheet2 would have only the data for account "A" sorted by job number. Sheet3 would have account "B"...
When a change is made to any of these sheets I want the other sheets to be updated.
Now that I have wrote this out it seems to me that a "worksheet event" macro might do this for me...
But can you write an event macro into all the sheets that would not result in a loop (event macro on sheet1 changes sheet2 which triggers the sheet2 event macro...)?
I am both employed and self employed. so I have built a spreadsheet to keep track of expenses... but I hate having to scroll down to enter more and more expenses. So I have created multiple worksheets...
WORKSHEE 1 "INPUT" Expense Categories down COLUMN 1 Dollar Amounts down COLUMN 2 I would like to use this worksheet to just enter data from a receipt, then press enter and have this information transferred over to WORKSHEET 2 " TOTALS" on its own ROW. Once Enter is pressed, then enter in the same cells on WORKSHEET 1 "INPUT" for another receipt and once Enter is pressed, the data would transfer over to the next row on WORKSHEET 2 "TOTALS" and so on...
So if I want to see my totals... I just go to WORKSHEET 2 "TOTALS"
I have built WORKSHEET 2 "TOTALS" as follows ROW 1 is the SUM for each respective COLUMN Each COLUMN is its own CATEGORY from WORKSHEET 1 "INPUT" Each ROW would represent a new data entry. To be exact.....................
I am trying to populate a blank sheet with data from multiple sheets given a certain condition.
Scenario: I have multiple columns on each sheet, but only three of interest to me. The first column has a header "Part ID", the second column header is "Description", the third column header is "QTY". I want to pull the data from all three columns to the new sheet when the QTY for that column IS NOT 0. The three columns of interest are always in Column A, B, and C.
The only thing that may make it tricky is that the data doesn't necessarily start on the first row of each sheet. For example, the headers for the first sheet are on row 17, and the headers for the second sheet are on row 5. So on and so forth...
I have a few CSV files that sits in a folder ie C:/Data and I want to split the data in those files into different sheets. Each of those files contains rows of data with an account number. For example, I have 3 files that contains transactions and they have accounts "Orange", Apple, pear, I want to put all transations with account apple together and all Orange transaction together etc etc.
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
I have created this with text, command & list boxes with a view to creating an asset register.
So the options i have are premises, hardware, software & fixtures. I have tested so that these go onto 1 sheet ( at the moment all additions go to premises) but i require for it to go to there respective sheets i.e. a sheet for each asset.
But, due to inexperience with userforms and VB i don't know how to do this.
Also, how can i get a sequential number coming up for each asset on their respective sheets
I am an absolute beginner to Excel programming and new to this forum. After I have been reading some basics I think this is absolutely the right place to learn
What I am trying to do i to use a userform for input in list. Should be simple, but I can't figure it out
Attached there is a sheet that I set up. The sheet called "Source" contains some data that is used as a picklist in the input form. I created a user form called "Newflight" with comboboxes in which you can input plane type, pilot and passenger based on the data in the Source sheet. It also contains an input box for the take off time. (it would be very nice if I the actual time could be entered by a single click, but the user should still be able to enter it manually). After clicking "STORE" the data should be stored in the first empty row in the sheet called "List".
I am working with several userforms and try to transfer data obtained in one userform (lets call it Userform1) to another (Userform2).
Specifically, the idea is to have a commandboxA where the user can choose several options and the selection will define a string, and I want to use this string in Userform 2 to define a text.
Example:
The user chooses "solid" in the commandbox and I define the string as "rock"
Dim structure As String If commandboxA1.value = "solid" Then structure = "rock" etc...
And in Userform 2 I would like to combine the string structure with other strings, e.g.
If commandbox.value = "example" Then example text = "example text@ & structure & "text"
However this does not work, because the string which I have defined in Userform1 is not defined in Userform2. How would I define the string specifically, such that I have access to it in both userforms? How can I define the string as public? I tried several times, but could not get it to work.
I have a userform which loads the data into a worksheet named "Data" which is being used as a database for an event scheduler. I also load a calendar from a worksheet named "Month" so I need the information from the userform "UForm01" added to 2 worksheets.
The userform adds a series of textboxes to worksheet "Data" in the first open row. I also need certain textboxes from the Userform to be added to another worksheet to populate the calendar.
Is there any way I use the same userform and somehow change the 'input' cell to the next row down each time the userform is selected..
For example:
I have a macro button, which when clicked opens a userform, an option button is selected and that value is put into a cell in a certain column.
However, as shown in the grid below, theses macro buttons are the same all the way down the column, and lead to the same userform, so instead of creating hundreds of the same userform is there a way of changing the cell number (row) when the next macro is pressed??
I have a UserForm from which you are required to select all options. Then the user is supposed to click "Add To List" and the selected items must appear in the TextBox in a Row format.
1) In order to accomplish this i create a Sheet in Excel from which i will store all the Added Items to the list. From there i will send the results to the TextBox.
2) The user must be able to select a Result from a row in the TextBox so he can delete it.
3) The user cannot select the first row as it is the header.
I have to this code in the "Add To List" button SUB.
I have a series of Userforms that I would like the user to be forced to enter in some sort of information in one of those userform in the series. I do not want it to be submitted blank. Is there a code or a properties toggle to make this possible.
How would I go about making a user form that has an input box where you can type in a year (in yyyy format), and then two radio buttons that allow you to choose either "Jan-Jun" or "Jul-Dec", and a submit button to run a corresponding macro.
The purpose of this is I have two macros that run the same report, one is for first half of the year, second is for second half of the year. For simple purposes we will call them "JanJun" macro and "JulDec" macro ...
I am trying to restrict a cell to only be able to input the letter "i" multiple times, almost like a tally sheet, in other words I want the cell to be restriced to one letter, but allow that letter to be entered multiple times.
I have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)
Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)
On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)
I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total
I jst need to console data from different workbooks to one worksheet. There are 30 workbooks & each workbook contains one worksheet name as Data. The work i am currently doing mentioned below step wise
1) Open workbook 2) Apply filter on whole data 3) Select dates from "J" Column (E.g 02/10/2014 to 02/20/2014) 4) Then Copy whole filtered data 5)Paste into New workbook 6) Open another worbook 7) repeate Step # 2,3 8)Then paste whole data in below the first data New Workbook (In which we have paste the first data below that i will paste this data)
These steps i have to do manually it takes almost 1hr daily After pasting all 30 workbooks data in one workbook i have to make pivot of it & sent it to my Manager. What i need
I jst want a excel macro that will ask me date range from which i have to pull data from all 30 workbooks.
Once i gave date range will jst click on button say extract or pull. It willl console whole 30 workbooks data from the given date range in a one worksheet.
