I am using and index match formula that looks at names and dates. The dates are fine. The names are fomatted the same in both lists. Two names identical in each respect give me a #N/A result. It should match but it does not. How do make each formatted the same. Very strange......
Example:
Chuck
Chuck.
I am not sure where the error is in the formula. Also I would like to add one more condition to it.
Another problem- I created Drop Down using Data Validation. Now I need to make the Drop DOWN ICon visible. It becomes visible only when I click on the cell.
I am trying to use index & match function to extract data from data base with has multiple critera in rows as well as cloumns but it is not giving correct results.
Example:
A
B
C
D
E
[Code].....
In C9 I typed =INDEX($B$2:$E$6,MATCH($A9,$B$1:$E$1,0),MATCH($B9,$A$2:$A$6,0))
The result I got was #Ref!
what formula should I use in C9 to get 20, C10 to get 5 & so on
FB1 to FB4 are column headers (critera)
GL 1 to GL5 are row headers (critera)
I can't understand why this macro no longer works. The macro runs without error but never proceeds because it doesn't think the dates ever match when infact they do. Here is the part of the macro not working.
Sub Equity_Dividend()
Dim wb As Workbook
Set wb = ThisWorkbook
For Each Sh In ActiveWorkbook.Worksheets( Array("G&I", "Growth"))
For Each ce In Sh. Range("a5:a" & Sh.Range("a65536").End(xlUp).Row)
If Not IsEmpty(ce) And Not (IsError(ce.Offset(0, 50))) Then
If Date = ce.Offset(0, 50) Then
'here is the meat of the macro it never gets to ...
per attached I'm trying to establish that values in one sheet are present in another. The MATCH function isn't returning anything.
View 5 Replies View RelatedI am getting a #REF error when using an INDIRECT function within a MATCH function to check against a dynamic named range. Basically, I am trying to get the row reference so that I can go back and extract other data from the row (in a table contained in another sheet) into the current worksheet.
I attach an example file for reference. The issue arises when a Dynamic Named Range is used. In the example file, if a value from a static range is chosen, the match with indirect function works, but it fails with the dynamic range.
Dynamic Ranges INDIRECT v2.xlsb
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i
I was looking for a final result as follows
21-Aug-09 + 1 = 24-Aug-09 (Day + next 1st working day)
21-Aug-09 + 3 = 26-Aug-09 (Day + next 3rd working day)
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedI have a WB with multiple sheets. I have a Feed sheet that automatically pulls data from the web. I have a Scores sheet that currently has all head to head matchups each week for an entire season. So I want to check the cells on the Feed! sheet to find a partial match and if partial match exists then copy cell that contents score from feed sheet to the score sheet next to the appropriate teams name. Currently I have to manually enter all scores each week for the rest of my WB to update.
I need to look at Cell A3 (on the Feed sheet) which has "New York Jets" then search for a partial/similar match on the score Sheet (which is NY JETS, in this case). NY JETS could be in column B (rangeB2:B257) OR column D (rangeD2:D257) BUT I need to search by row, not column, then once a match is found check the cell to the immediate right and only if the cell is blank copy data from the (!feed) sheet to that blank cell on the (!scores) sheet
This is what happens if working right =
look at cell A3 on the (!feed) sheet = "New York Jets" then search (!scores) sheet Column B and Column D by row for a partial match, finds "NY JETS" as match in cell D8, if cell E8 is blank then copies cell H3 from (!feed) sheet, and pastes to cell E8 on the (!scores) sheet, if cell is not blank continues search until 1st blank cell to the right of matching cell is found (as there will be mutiple matching cells with blank cells to the right but I am only interested in the 1st blank cell found, once found and data copied the process is done and then starts over with cell A4)
Look at cell A4 (!feed)= "New England Patriots" then search (!scores) sheet Column B and Column D by row, finds "NEW ENGLAND" as match in cell B8, if cell C8 is blank then copies cell H4 (!feed) sheet, and paste to cell C8 (!scores)
Once this is done it moves on to the next cell in the next row on the (!feed) sheet, A5, to find a partial match for the data in that cell. I need to continue the search for each cell A3 to A74, and if no match is found to move on to the next cell A6... (based on the way the data is pulled in from the web there are some blank cells as well as some cells that say Game Final, this data won't be on the scores sheets in column B or D).
We know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies View RelatedI am very new withe macro I recieve every day a CSV file from our supplier withe a list of the products that got updated withe new price, stock count, product ID etc.
I have my own worksheet with the product ID that we use, and I want to finde the exact match to my product ID in that CSV file and delete all other that don't match.
But i need them get deletede by rows thos product ID that dosen't match to my workbook.
I tried with this, so it could set an X in front of my match then i could filter and copy it to my workbook but it dosen't work:
Because the same product ID is sometime in 100 rows and the X come only in front of one of them.
=IF(ISNA(MATCH(Q2:Q1000;G$2:G$1000;0));"";"X")
so with some macro. I need to have every row deleted that don't match to my list of product ID.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedI have 2 worksheets named sheet1 and need_to_delete that are in the same format: 7 digit number, 5 digit alpha numeric, text, dollar amount. I need to copy every row into sheet2 where there are no matches in the column A of the two source worksheets, and copy every row that does have a match in column A into sheet 3. I also need to keep the rows in their current order.
View 5 Replies View RelatedI am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies View RelatedI couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies View RelatedI saw a post with a formula of =LOOKUP(9.99999999999999E+307,SEARCH(" "&KeyWords&" "," "&$A1&" "),KeyWords) which I thought might work, but it returns an error.
I'm trying to search on A1 and return the correct name from a named range called KeyWords.
A
B
C
D
1
Chicago
#N/A
Chicago IAP
[Code] ......
I am looking to sum the values found at the intersection of multiple values based upon a vertical and horizontal lookup. The formula I am trying is as follows (which results in #Value):
{=IF(ISBLANK(G$9),"",SUM(IF(INDEX('Journal'!$A$20:$Z$1020,MATCH("Prior",'Journal'!$F$20:$F$1020,0),MATCH(G$9,'Journal'!$H$19:$Z$19,0)),"")))}
Attached is a spreadsheet of 2 tables from B:1 to V:5
I need to shift either rows down if cells from column B do not match column M and vice versa.
How would it be possible to acheive results as shown in B:10 to V:15 through VBA.
Example:......
On my worksheet 1, I have two dropdown boxes: B7 (that gives the building name) and B11 which gives the Type of Commission (Renewal, Expansion, New). B 20 is supposed to automatically select the percentage based upon what B7 and B11 select. E.g. B7 = House, B11 = Expansion then B20 should be 3.
This is my formula.
=HLOOKUP(B7,'Building Details'!$A$2:$R$24,MATCH(B11,'Building
Details'!$A$2:$R$2,0))