Open File With Highest Extension?
Jun 26, 2014I need a VBA script which only opens the file with the highest extension.
The files are test.aa1, test.aa2 and test.aa3. This can go up to 5. In this case the filoe test.aa3 should be opened.
ADVERTISEMENT
Open And Close File With No Extension
Feb 21, 2013I opened a file, by file I mean a "file" with no extension that has commas separating it.
So I recorded a macro to open up the file and this works fine.
How do I close it? I tried
wk1 = ThisWorkbook.Name 'Main Worksheet
...
Workbooks(wk1).Activate
ActiveWindow.Close
But the problem is that "wk1" is not set equal to the name, probably because the file is not an excel file, it has no extension.
How To Save File With Correct File Extension (XLS Or XLSX)
Mar 12, 2014How can I save worksheet from existing workbook as a new workbook with extension .xls or .xlsx depending on the version of Excel on which the original was opened and no matter the extension of original?
My code that I was trying to create all above does not work, because even if I am using Excel 2007, 2010 or 2013 it will still be saving only as .xls.
VBA Code To Open Any Excel Extension (XLS / XLSX / XLSM)
Apr 22, 2014I am using the following code to open a woorkbook:
Workbooks.Open Filename:= "C:UsersDesktopExcel.xlsx"
I am running into an issue were a file may be saved as .xls or .xlsm instead, but I still need to have the macro open it. Is there a way to adjust the above code, or other code for that matter, that will allow my macro to open any of these extensions?
File Format Or File Extension Not Valid
Sep 20, 2013I saved my worksheet in vba .xlsx and for some reason, when I go to the folder that it's saved in and try to open the file I get an error message saying "excel cannot open the file 'PO Acks fo 09-20-2013.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
This is weird because I have another file that I save right before this that opens just fine without an error. Getting frustrating. When I go into the ~Users folder it shows as an excel file and saved as .xlsx.
Where would the link be missing?
Here is the code
Code:
ActiveWorkbook.SaveAs Filename:= _
"G:PURCHASINGSupplier ServicesGroupSharePublic~UsersPO Acks for " & Format$(Date, "mm-dd-yyyy") & ".xlsx"
Add A File Extension In A Cell
Feb 18, 2009I have a sheet I am working on that was given to me by a supplier and for example the cell in A1 is '2008_world_soccer'. How do I add '.jar' to the end of the filename bearing in mind the filenames are not the same length in each cell. So it would then read '2008_world_soccer.jar' or ''2008_world_soccer_GB_test.jar' etc. Any ideas that would saving me having to edit and type .jar at the end everytime for over a thousand records?
View 3 Replies View RelatedExtracting The Extension Of A File
Dec 7, 2009I have a list of file names in an excel sheet. The requirement is to find the extension of each file in the next column. For example
file name 123.456.789.jpg
extension jpg
file name 123.abcd.789.xlam
extension xlam
is there a worksheet function equal to InStrRev in vba?
Macro To Inport WK4 File Extension
Mar 31, 2009creating a macro that will inport file exention which has WK4 , i have lotus notes at work i have exported email file to drive U: , i require a macro to pick this file up and export to Sheet Group_Mailbox. The range is A9
View 9 Replies View RelatedError Opening File......different Format Than What Specified By Extension
May 15, 2009Apparently my program quits after i try to open an excel file. If you open the file manually you get an error upon opening the file...something like this:
"File you are tyring to open is in a different format than specified by the file extension".
The problem is i am using an excel macro using VBA and once the file is opened the VBA execution quits.
The excel file turns out to be an xml file which excel can open the file and have the VBA continue running if i RENAME the file with an "xlsx" extension. The problem is that i cant ask the user to rename the file.........how do i get VBA to open the file without an issue?
Copy Extension Of File Names To New Column
Jul 9, 2013I have a column that looks like this, beginning on C10:
Code:
File Name
2316-17-312A.xrdml
2316-17-312B.xrdml
2316-17-312C.xrdml
[Code].....
I want to copy the extension of each file to a new column (File Type). How might I go about this?
Custom Add In: Add The File Name Extension And Relevant VBA Code
May 21, 2007Has anyone got the add in code? I have my own custom menu bar on my excel. But every time i want to add a new link i must go into the code and manually add the file name extension and relevant VBA code. Is there a method of just entering the file extension in a cell range and excel will automatically update or pick up or link from this location?
View 9 Replies View RelatedDetermine File Extension With FileSearch Method
Aug 23, 2007I am attempting to write a macro that will open every file in a given folder, then save the files with a new file names while keeping the original file extension. The files I'm opening with excel have file extensions of ".VA", ".TOU", and ".KVA". The new file names I want to save the files with are contained in cell A1.
An example would be:
The excel macro opens file "R003890.TOU"
The macro assigns a the value in cell "A1" (B1040) to a variable
The macro assigns the file extension (.TOU) to a variable
The macro saves the file as file name variable and file extension variable (B1040.TOU)
Insure Cell Value A Proper File Extension
Apr 8, 2008I'm trying to insure that when a file name is inputted into cell "DA7" that the string ends with a ".xls" extension. I'm using "DA7" as a target and have written the following code. When executed nothing happens.
If Target.Address = "DA7" Then
Dim ta As String
ta = Target.Value
If Right(ta, 4) <> ".xls" Then
MsgBox "The file name must end with a '.xls' extention"
Target.ClearContents
End If
End If
Merging / Appending Folder Of Files With File Extension?
Aug 21, 2012I have a folder containing 1000's of files. All the files end in .txt (for example test.txt) but are actually excel files. When I go to open the files with excel I get the following warning:
The file you are trying to open is in a different format than specified by the file's extension. Verify that the file is not corrupt and from a trusted source before opening the file. Do you want to continue?
I click "yes" and it opens fine as an excel file.
I want to merge all these files one after another into one file.
Master Workbook - Saving File With XLSX Extension
Jun 23, 2014I have a master workbook that contains macros and has an xlsm extension.
One macro in the workbook copies one of the worksheets to a new workbook. I then want to save this new workbook as an xlsx file. I use the following code line:
.SaveAs Filename:=Extract_Save_Name & ".xlsx", FileFormat:= _
xlOpenXMLWorkbookMacroEnabled, CreateBackup:=False
However, when I run the code I get an error:
"This extension cannot be used with the selected file type."
The new workbook does not contain any macros and if I save the workbook "manually" as an xlsx it saves fine.
If I change the code above to have "xlsm" it works fine - but I don't want that extension.
File Open Dialogue Box To Open In (Directory Of Tool File)
May 31, 2013I have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
View 1 Replies View RelatedGet Highest Number From File Name?
May 23, 2014I want to get highest number from filenames in a folder.
for example below are files in folder
AB-1234-001.plt
AB-1234-002.plt
AB-1234-003.plt
AB-1234-004.plt So I want to get "004"
XY-12345-001.plt
XY-12345-002.plt
XY-12345-003.plt
XY-12345-004.plt
----
----
XY-12345-075.plt
XY-12345-076.plt Here I want to get "076"
file format is same but some times 4 digits in middle (AB-1234-001.plt) and some time 5 digits (XY-12345-001.plt)
My idea is , counting files ignoring suffix (eg 001,002,003) and count howmany are in folder. So code counts based on AB-1234 and return me value how.
Macro -open The Look In List” And Stop So I Can Pick A File To Open
Oct 18, 2008I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies View RelatedHighest Number From File Names In Folder
Dec 22, 2009I need a macro which checks for next available number from list of filenames in a folder. Then it returns that value to one predefined cell in a new document (here Untitled.xls). For example:
c: est
has the following files:
Untitled.xls - read only
abc-09-001.xls
abc-09-002.xls
abc-09-003.xls
abc-09-004.xls
Next available filename should be "abc-09-005" and macro returns that value to predefined cell in a new document (Untitled.xls). There should be NO saving at this point whatsoever. Macro simply picks the next value from a filelist. As you've noticed the value has some constants too. New document doesn't know the last picked value before macro is active (predefined cell should be empty at startup).
Check To See If File Is Open, And If It Is Open, Activate It
May 14, 2009I have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
Get Open File Name To Open Multiple Files
Jul 3, 2007I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
Open Website - Download CSV File / Save As In Specific Folder Under Different Name And File Type
Jul 6, 2012I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
Date Function- Open A File, Make An Exact Copy And Save It Under A New File Name
Jun 4, 2009I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
Automatically Open File In Specific File Path When Another Sheet Is Opened
Mar 20, 2014I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
Locate CSV File With Open File Msgbox And Import Columns From CSV To Worksheet
Oct 28, 2011Actually i've downloaded Tracking report of my SPO and this report is on 4-5 csv files (1 file per week). I have to gather data from these 4 files into one Worksheet. I have to do this with command button on my worksheet; with Open file dialogue box (i want to locate the csv files).
CSV files are something like that (I need only first 4 columns):
ABCDE1Name MSISDN Date Location MapLink 2M. Younus Safi "923***550577" "2011-10-07 20:36:18" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 3M. Younus Safi "923***550577" "2011-10-07 19:36:26" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 4M. Younus Safi "923***550577" "2011-10-07 16:39:58" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 5M. Younus Safi "923***550577" "2011-10-07 15:37:23" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 6M. Younus Safi "923***550577" "2011-10-07 14:37:05" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com"
and my Worksheet is like that (With a command Button):
I want to import first 3 columns of csv file on first 3 columns on my worksheet; leave 2 columns blank and then import the 4th column... now for example i have done importing data from 1st csv file and the data is on 50 rows.. i click the command button again, locate the 2nd csv file.. do the same thing (import 1st 3 columns, 2 blank, then 4th) --from 51st Row-- and so on...
ABCDEF1NameMSISDN DatedBlankBlank Location2
3
4
5
6
7
Open Excel File By Providing Part Of File Name Through Inputbox
Feb 11, 2014I need a VB code to open excel files located in a path (fixed path) by providing a part of file name through a input box
for ex: I have some files located in my local drive as below
1. colurgreen.xls
2. colurred.xls
3. colurblue.xls
I need a input box asking for file name and I input "green" or "red" or"blue" and it should open the resp file.
Open A Closed File To Archive Some Data From A Current File.
Oct 20, 2009I have the need to be able to open a closed file to archive some data from a
current file.
what coding i need to be able to kick the "open file" bit off?
Macro To Open File Saved In Same Location But File Name Changes With Each Date
Feb 8, 2013I do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
Open Excel File Based On Date In File Name That Is From One Day Before
Apr 24, 2014I need to open an excel file based on a date mentioned in the file name, but minus 1 day. The file name is composed with Statistics_date_time.xls
Example: statistics_20140423_142754.xls
Once I need to open the file (only in the mornings), it has to be the one from the previous day to see the yesterdays performance. How can I create a macro that will look at the date in the file and take the one from yesterday?
This will be a part of a macro I'm making. The rest of the macro will just format the file and combine a few ones from different departments.
Formula To External File, Requires File To Be Open
Jun 12, 2006I've got a couple of formulas in a workbook which lookup values in another workbook. When I reopen the initial workbook the formulas results come back as errors (i.e. #VALUE!) unless the workbook it is looking at is also open. This is not desirable, does anyway know how I can lookup values in another workbook which are not open? The formula which is causing me problems is as follows:
= SUMIF( 'H:Infozoom[2006-01_assy.xls]New Table1'!$F:$F,$A8,'H:Infozoom[2006-01_assy.xls]New Table1'!$AH:$AH)/60
