macro that will parse data that has been pasted in to Excel from a text document. Once the macro is executed the pasted data will be sent to a separate spreadsheet and parsed horizontally with the data residing in is respective cell.
Here is an example of my data from text:
FIRST: Frank
MIDDLE: N.
LAST: Stien
ADDRESS: APT14
STREET: Halloween
ZIP CODE: 123456
CITY: Scaryville
STATE: Scary Ya
COUNTRY: Transilvania
COMMENT: N/A
Here is an example of my desired results:
A2:Frank, B2:N, C2:Stien, D2:APT14, E2:Halloween, F2:123456, G2:Scaryville, H2:ScaryYa, I2: Transilvania, J2:N/A
The data is always pasted in A2 on the first sheet, and varies somewhat in length but the format is always the same.
I have a parts list which came from one source in the format below. First column is the name of a product, the following columns show what components and what quantity go into the product:
Small Fruit Basket Apples 2 Oranges 3 Bananas 4 Large Fruit Basket Pears 5 Peaches 6 Mangos 2
The format I need it to be in is below, but I don't know how to go about it or if it's even possible:
Small Fruit Basket Apples 2 Small Fruit Basket Oranges 3 Small Fruit Basket Bananas 4 Large Fruit Basket Pears 5 Large Fruit Basket Peaches 6 Large Fruit Basket Mangos 2
I am starting a data sheet that I will be pasting from the internet into my data sheet daily, the problem I have is that the content data is pasting with blank rows between data and also there is one piece of data that is situated on the row below which i need moving to the end of the main data row, the idea is to have single data rows with no blank rows.
I have attached an example sheet showing the layout it repeats with only the amount of data that changes.
I have colored the data as follows:
Grey= Blank Rows Yellow= Data Move to end of main row Green= Unwanted Data
This has a macro assigned that copies the data and pastes it into another worksheet at the next available row.
Now this works fine, but I want to be able to identify if the data already exists in the other worksheet then prevent it from being pasted and give an error message that the person already exists in the database.
I have been given a set of data from one of our clients with company and address information in a Microsoft Word document. The data is not formatted into fields delimited by either a comma or tab and none of the fields has a heading of any sort. The data flows vertically rather than horizontally. I have imported the data into Excel in the hopes of being able to break out the data into an Excel or csv format in which the data can be imported into a Filemaker Pro database. Its format is the following:
Company Name (cell A:1) Address (cell A:2) City (cell A:3) State (cell A:4) Zip (cell A:5) telephone (cell A:6)
I have tried recording a macro that moves the data from cell A:1 into cell B:1, then cell A:7 into cell B:2, etc. But have failed to get a macro to work that runs through all of the data in column A:A. The data is consistent - that is, there are only the 6 rows of data. Is it possible to write a code that moves the data from cell A:1 (the company name) into cell B:1, then skips 6 rows to cell A:7 (the next instance of a company name) and moves cell A:7 into cell B:2. The same procedure would then be run on the address, city, zip, and telephone.
1st problem is that for COL 7, all i want in there is the "49C", I'm currently getting " 49C-Loc P11B".
My ultimate goal is to get any number that is before the C and the C itself. The number before the C could be 1 to 3 digits.
2nd problem is Column 9. That snipit of data will always start with an "A", have another alpha, then a space, then a number. I'm trying to just get the number.
I have a 5th variable with a sentence in it for example
Sen=”The bug and bird are in the park”
What I need to know is which of the variables content appears in the variable Sen first and what position it is. In this case it would be variable three position 5.
I have rxd a pdf file that I need to manipulate I have copied the data into excel and now need it in individual cells:? The data looks like this: 02392950067 19/12/2008 14:33:35 02392950053 Portsmouth 1.9 £0.03. this is:
phone number calling | date called | time called | number called | duration in minutes | cost of call. If you're out there I'd be more than happy to hear from you. the cells to cut the data into will be formatted to take the data in the correct form. 02392950067 19/12/2008 14:33:35 02392950053 Portsmouth 1.9 £0.03 phone number calling | date called | time called | number called | duration in minutes | cost of call.
Whenever I copy and paste dates from the internet I can't get Excel to recognize the info as dates, thus making it impossible to sort by date. It doesn't matter which site I use, I have the problem with all of them.
[URL]
Using any of the links above, how I can paste those dates and get Excel to sort the date?
I have a thoroughly outdated system to keep a log of call centre stats. In order to facilitate a marginally easier workflow, I have rearranged a few things so that a user simply has to copy and paste data from reports into the worksheet.
The worksheet is set up with all the number formats like time and percentage which are extremely important in totaling and averaging hours and availabilities, however the pasted data doesn't match the destination format and it therefore affects the total.
I have tried many different special pasting options to no avail.
The only way i seem to be able to do it is to go into each line and retype my percentages (as 100 becomes 10000% ) and click the tick next to the formula bar so 00:00:16 is calculated as a quantity of time instead of text. With 30 people and 15 stats each day that exercise becomes a little bit tedious and counterproductive.
I have a powerpoint presentation which has a bunch of Excel charts embedded as Microsoft Office Graphic Objects, but I don't have access to the source data (plus the links are broken).
how to get the underlying data. I vaguely recall once doing this with some vba that I had found somewhere the net, but I don't have the code anymore.
I have some code that works within Excel however:
Code: Sub GetChartValues() ' this macro will recover the data from a disconnected Microsoft Graphic Object (such as we used to paste ' into PowerPoint). You will need to insert a Worksheet entitled "ChartData" to store the values. Dim NumberOfRows As Integer
I have a spreadsheet that gathers information from multiple cells and strings the data into a long string - each piece of data broken by a comma in the string.
In another spreadsheet, I copy this data string into column A on sheet 1 - starting on row 2 and down.
On sheet 2 - and this is where I need help - I would like to have a macro that will take each data string on Sheet 1 column A and parse it out into multiple columns but the same row on Sheet 2.
ColumnA Row2 Sheet1 -> changing to many columns on Sheet2 but still on the same row.
The data string always represents the same number of data components - its just a matter of breaking it out and placing each data piece into its own column.
a VBA code for PARSING and EXPORTING data to multiple excel workbooks based upon unique entries in column 'N" only for those rows for which column Y value is "ACTIVE".
I am currently using a code which allows me to export data based upon unique values of column N but how to weave in an additional pre-filter criteria of Column Y value being "ACTIVE".
ABCDE1Source DataDesired Result Include these extensions: Exclude these extensions:2OLD.FILENAME.rar.htmNEW.FILENAME.rar .part*.rar.htm3OLD.FILENAME.part01.rarNEW.FILENAME.part01.rar .rar.html4OLD.FILENAME.part02.rar.html.htmNEW.FILENAME.part02.rar .avi 5OLD.FILENAME.txtNEW.FILENAME.txt .zip 6OLD.FILENAME.zip.htmNEW.FILENAME.zip .txt 7OLD.FILENAME.aviNEW.FILENAME.avi .7z.* 8OLD.FILENAME.7z.01.htmNEW.FILENAME.7z.01
9OLD.FILENAME.7z.002NEW.FILENAME.7z.002
I'm looking for a formula which can take my original data (column A) and "transform" it into what you see in column B.
I am transferring large amounts of files from various servers to my ftp and back out again. My original data are url filenames which of course, are named differently and not how you see it in my example.
The filenames themselves are preceeded by website names and varoius folder/path names. I edit the links to include various Usernames and Passwords and at the same time, rename the original filenames. Then I transfer the files to my ftp.
Most of the files have a ".part*.rar" extension at the end, so my formula has only included this scenario. Rather than manually editing my formula everytime a different extension is present (about 20-30% of the time), I would like to find a way to automatically look at a table/list of possible extensions (D2:D7) which are to be recognized for the sake of finding the end of the filename itself, so that I can rename (SUBSTITUTE) the original filename to that of my choice (cell D13) and of course, also include the original extension(s) of the source data (keeping this is important, especially in the cases where ".part*.rar's" are present). The list of extensions in cells E2:E7 are to be excluded from the new filename.
My present formula works fine for the editing of the username and passwords for various servers and for finding the beginning of the filename in the original url. It also works fine for finding the end of the filename (for the sake of renaming it), but only in cases where a .part*.rar" is present.
I have to enter patient's SSN's into my database. The fastest and most error free way to do this is simply copy the SSN from the electronic chart and paste into the appropriate cell in the database. I don't want duplicates. So, I need the database to alert me when I paste in a duplicate SSN. I know you can set data validation to do prohibit duplicates by using a formula. In the attached spreadsheet the SSN is in column B, so:
I have a set of 50 or so large worksheets that need updating each month. My problem is the figures I need to update these sheets with are formatted differently (different alignment of blank rows) to the destination.
I'll try to illustrate, this is the sheet I need to add data to on a monthly basis... (you'll need to imagine the numbers in column form as I'm no HTML expert)
May June July 23 34 45 65 34 45 34 23 23
[Code] .......
The blank rows need to remain uniform. When I need to paste in August's data the blank rows in the raw data extract are aligned differently and it's a laborious job deleting and inserting cells to get them to align (the sheet has hundreds of rows).
I'm capable enough of recording a macro to replicate the delting/inserting of cells BUT of the 50 or so sheets I need to update there's no uniformity of where the blank rows occur. To further exacerbate, there's no uniformity over where the blank rows occur in the data that needs to be pasted in, either. The blank rows already in the worksheets HAVE to remain and can't be deleted or altered.
I'm currently using some pretty extensive conditional formatting macros on a worksheet (this functionality is working fine when data is directly entered into the sheet). But when i paste data from another worksheet into my "formatted" sheet, the formatting does not take affect. is there any way to "refresh" a macro?
Below is code I have attempted. I am learning VBA and have gathered this code from the internet and this forum. I have data that is in columns B to E and from row 7 down. I want this VBA code to run when data is copied/pasted in these cells. Where the last values stop will vary so I just want to be sure this code is executed after all the data is pasted in these cells. The data will be pasted at one time. When the user removes the data from these cells, I do not want the code to run.
Private Sub Worksheet_Change(ByVal Target As Range) 'Do nothing if less than four cells are changed or content deleted If Target.Cells.Count < 4 Or IsEmpty(Target) Then Exit Sub
The macro firstly formats the data that is pasted into it from an access database, then it does some calculations to determine when 10 working days from a specific date is, and when 20 working days from the date is (these go in new columns at the end of the data). The macro will also add new columns which say "Not resolved" if there is no date in the Resolution column, "Yes" in the "10 working days met?" column if the condition is met and the same for 20 workings days in a different column. As the colouring etc takes a long time I really wanted to add as conditional formatting to the macro!
how to attach a spreadsheet here then I can show you what the outcome we want is. A point to note is that there is not a set number of rows each time we do this, and I don't just want 1 cell to be coloured - I want to specify which cells in the row are coloured depending on the results in another cell on that row.
I am having trouble parsing the numeric data from the following table into separate columns. The five different numbers (ex. 70, 130,10,5,6 in the first row) represent nutritional info about the product. As you can see, the number length varies for the different categories. How to get these 5 numbers into their own columns using LEFT, RIGHT, MID, FIND, etc. functions.
I have a text file which is attached as "rawdata". It contains records of something (let's call it temperature) at different times on different days. My goal is to display a graph of temperature versus time so that I can visually analyze trends. I have hundreds of these files, all of different lengths. it is very important that I automate this process as much as possible.
Detail: (Here I describe what I have done so far; if this is inefficient or unnecessary, feel free to tell me) I open Excel 2010, click File, Open, and select the file that I want to parse. It is a TXT file, so the Text Import Wizard comes up. For step one, I select Fixed Width. I select File Origin: MS-DOS (PC-8). On step 2 of the wizard, I create column break lines to place all dates in the far left column. The next column contains the first column of numbers before the first dash (-). The next column contains only the dash - I will later select "ignore this column" to eliminate them. The next column contains the time stamps. I continue adding column breaks in the wizard until all of the data are parsed into columns in the same manner.
In step 3, I format the first column as "date (DMY)". The columns with the dashes I select "do not import". Everything else is "general". I click "finish", and the resultant workbook is attached, called "import".
Now, as to what I want to do: I want to display the "temperatures" as a graph vs a date/time axis. The reason I find this difficult is because the temperatures and times are not in neat columns, but are in 4 columns that go in a left-to-right and top-to-bottom progression and are broken up every few lines. (I am interested only in numbers that are displayed immediately to the left of a time-stamp. Therefore, the "record #"s should be ignored. We can delete the rows that say "record #" if can be done automatically.)
I copy and paste large amounts of data using macros. Excel leaves some kind of trace, placeholder or something in the cells that are blank on the original sheet. So all my math calculations are messed up on the destination sheet.
Using GoTo special blanks does not work to select these cells in mass. I know how to loop through all the cells one at a time and check to see if they are "" or have a length of zero and clear them, but these methods take forever.
I created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.
I am having trouble figuring out how to paste an Excel Worksheet into Outlook. I am using '07 versions for both. I currently have code that when a button is selected, Outlook opens and has form text that I have entered. I just cant figure out how to get the worksheet pasted into the body of the email after this text. Here is what I have:
