Paste Variable Value Into Column?
Sep 18, 2012
I have the following code,
Code:
ThisWorkbook.Sheets("Forecast").Range("A" & Rows.Count).End(xlUp).Offset(1).PasteSpecial xlPasteValues
This just pastes a value found in another wokbook into column A.
What I would like to do is paste the value in column A and paste another value in column B which is set in this part of the code,
Code:
Nominal = DEPWS.Cells(SourceCell.Row, 1) & DEPWS.Cells(1, SourceCell.Column)
So something like paste value in column A and past Nominal.value in column B
View 1 Replies
ADVERTISEMENT
Feb 5, 2014
I have data (departments) going down column A Starting in Row 4.
Then I have data (months) going across Row two. Both of these will vary in length.
I need to copy a formula from cell C1 and paste it into cells where there is a value in column A and a value in Row 2.
View 7 Replies
View Related
Jun 16, 2014
I have data in E6-E67 on Sheet 1. Based on the date in A2 on that sheet, I need to paste to a column in Sheet 2. In excel, I am able to get the cell location through vlookup and get the correct column number/cell reference. When it gets to the paste location, I am stumped on how to format that line of code? Do I need sometime of variable? I tried to use the address/lookup code but it does not work.
I have excel 2013.
View 4 Replies
View Related
Aug 8, 2009
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies
View Related
Nov 19, 2008
to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.
View 14 Replies
View Related
Apr 4, 2008
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Sep 2, 2009
The initial code was from this forum. I modified it so it wont work
The code finds the first instance but none after, why?
View 3 Replies
View Related
Mar 16, 2012
I have some code that uses a form so you can choose the folder that contains all the spreadsheets that I need to copy. My issue is I have about 20 spreadsheets, some have the tab labled M3 and others Sheet1. Next is each spreadsheet has a different amount of rows in them. My data will always start in cells B4:N4 but may 20, 100, 1000 rows long.
My code works but only copies the first four rows of the last sheet open.
Code:
Private Sub cmdbtnProcess_Click()
Check_Path
End Sub
Sub Check_Path()
If txtboxPath.Value = Empty Or txtboxFile.Value = Empty Then
[Code]...
View 2 Replies
View Related
Jun 11, 2014
I would like to be able to count the number of rows with data and use it in a macro. For instance, Columns A:C and Rows 1:50 or more have data (the number of rows are variable). In Cell D1 I have a simple formula
Code:
=A1&","&B1&","&C1
I am using a formula in VBA like:
Code:
Range("D2").Select
Selection.Copy
Range("D3:D10000").Select
ActiveSheet.Paste
I don't want to have an arbitrary number like D10000 in the range because it will paste in cells even if there is nothing there resulting in a ,, in the cell. I know this is avoidable by wrapping in a
Code:
=IF(ISBLANK(A1)=TRUE,"",D1)
but the "" is not truly blank and jacks up the sorting.
If there is a better way by setting the row count to a variable like
Code:
countx=COUNTIF(A:A)
and then using it in the selection such as:
Code:
Range("D2").Select
Selection.Copy
Range("D3:countx").Select
ActiveSheet.Paste
Am I going out about this wrong, maybe missing something fundamental about this?
View 3 Replies
View Related
May 9, 2014
get this macro to paste the formula across to a variable number of columns? It is falling over at
VB:
Range(Cells(5, .Columns.Count)).Paste
VB:
Sub Clear()
'
With ActiveSheet
[Code]....
View 4 Replies
View Related
Feb 25, 2013
I'm trying to come up with code that will allow me to take numbers arrayed as follows:
25
25
42
42
[Code]....
The number of rows and columns are both variable.
View 3 Replies
View Related
Jul 12, 2007
Using a macro, how do I tell Excel to:
1. Copy the xth row and paste it before the yth row
2. Copy the mth column and paste it before the nth column
3. Copy the cell a,b and paste it in he position c,d
where x,y,m,n,a,b,c,d are variables, the value of which the user inputs, say in cells A1, A2, A3, A4, A5, A6, A7 and A8 respectively.
In other words, I need to read numbers m and n which are the values of cells A1 and A2, then I need to go to column number m (for instance, if m=4, I go to column D), copy the whole row, go to column number n (for instance, if m=6, I go to column F), and insert the copied column.
Also wondering if VBA provides any way to quickly horizontally and vertially flip copied tables while pasting. While I am aware of the transpose function which swaps rows with columns, I am looking for a way to reverse the order of either the rows or the columns as per my need, without having to copy-paste row-by-row or column-by-column.
View 9 Replies
View Related
Aug 15, 2007
I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub
View 8 Replies
View Related
Nov 14, 2012
Sheet 2 has 3 cells with values:
C14, C15, C16
I need VB code to:
copy the values in those cells
Return to Sheet 1, let the user click a cell in any row in Colum F, then Paste them (Special, Values and Transpose)
View 4 Replies
View Related
Jan 13, 2009
I am working on a macro where I am creating a formula to string together some text columns and then copy the formula down the entire column. The data source I will be performing this on will change in number of rows period to period. The data would be in columns A,B & C and the formula is in D. The formula in D is stringing together the data in AB & C and then I want to copy and paste that formula down to the bottom of all of the data. What would the code be for the copy and paste with variable rows?
View 9 Replies
View Related
Sep 29, 2012
I'm in the middle of building a code that will look at the value in Sheet: "DATA" column "J", for each row that matches a criteria that I pull from a cell - Sheet: "Test" Cell: "C1".
The number of rows varies. I want to paste columns: "I2, K2:P2, U2:AJ2" when the value in Sheet: "DATA" column "J" matches the cell "C1".
I'm using a Command button to click every time I want to generate the filtered data. And I would prefer the code to always copy data starting at Sheet: "Test" Cell: "K2".
I've copied, below, my test code that I have so far which only copies row 2 from the Sheet: "Data", and copies it into Sheet: "Test", starting at K2.
VB:
Private Sub CommandButton2_Click()
If Sheets("DATA").Range("J2").Value = Sheets("Test").Cells(1, 3) Then
Sheets("DATA").Range("I2,K2:P2,U2:AJ2").Copy
Sheets("Test").Cells(2, 11).PasteSpecial Paste:=xlValues, Operation:=xlNone
End If
End Sub
View 3 Replies
View Related
Jul 19, 2012
I am writing a code wherein I want to assign specific excel range to a declared variable and then paste this excel in outlook message ody but I am finding difficulty in assigning that range to variable " brng"
I think code is right and issue is there in excel setting.
Code:
Sub mailer()
'
'
'
Dim Ash As Worksheet
Dim brng As Range
Dim OutApp As Object
Dim OutMail As Object
'Windows("Copy of FF RPL REPORT_JULY").Activate
[Code] .......
View 1 Replies
View Related
Dec 6, 2006
on the syntax of things in VBA. here's a description of what i'm trying to do:
1) loop through a particular column ("N"), and compare the values (if not blank) with corresponding cells in another column ("V"). i.e. - comparing N1 to V1, N2 to V2, etc...
2) run If, ElseIf statements to display appropriate values in different column ("O"), but on the row that corresponds to the row the values in Step 1 are compared. i.e. - if N1 > V1 then cell O1 = value; if N2 > V2 then cell O2 = value; etc...
here's an example (but obviously not in proper syntax). hopefully someone can help me convert it to Excel VBA:
Function CalculateFR()
Dim Col1 As Column = ColumnN
Dim Col2 As Column = ColumnV
Dim Col3 As Column = ColumnO
Dim Cell As Cell
Dim IndexValue As Integer
For Each Cell In Col1
If Col1 > Col 2 Then
IndexValue = 5
Else If Col1 < Col2 Then
IndexValue = 4
End If
Next Cell
If Not IsEmpty(Cell) Then Col3 = IndexValue
End Sub
View 7 Replies
View Related
Feb 16, 2008
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
View 9 Replies
View Related
Mar 25, 2013
I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies
View Related
Dec 5, 2012
I have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).
Attaching sample a file with sample data to be converted.
It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.
I want this by coding or formula only. I dont want to use pivot table for this.
Expecting Result.jpg
View 7 Replies
View Related
Nov 22, 2008
i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".
View 4 Replies
View Related
Mar 11, 2009
I have the file here i work with, basically the first column is a legend and the column to the right of it is a pointer column to help me find out where a legend is located in another file. So i was wondering if a macro could be made to basically find where the "legend column" A, C, E ect ends ( every other column is a legend column , one next to it is a pointer column ). and then combine the ends all of the columns contents and put them into 1 column.
In the file with this question i have showed you what i start off with, i highlighed in yellow where each column legend ends, ( normally these are not highlighted and i find them manually ). In the 2nd tab i show what the end result should be. All the columns are now consolidated into 1 column. 1 after the other.
View 4 Replies
View Related
Sep 7, 2009
I am wanting to paste formula from N1 till N X (X = varaiable row) where X reliant on Column A Row X. If Column A Row X has character "=====" it should paste N1 Formula all the way down till N Row X which is equal to A Row X containing "=====" .
I might be sounding complicated over here but it is a simple equation.. I have tried to approach this in the capacity i could by condition if Column A row x is blank delete the row.
View 2 Replies
View Related
Oct 4, 2013
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies
View Related
Mar 27, 2009
I have a file that I would like to lookup variable row and a variable column. I have tired vlookup and hlookup but these do not work because you have to specify a given column or row versus having that column or row be variable. Is there a way to do this.
Think of a set of times tables. I would like to input 8 and 9 and get 72 as an output. How could I go about doing this?
Or in the attached file, I would like to say A and 15 and get A15.
View 3 Replies
View Related
Apr 16, 2013
Code:
Range("a" & Cells.Rows.Count).End(xlUp).Select
Range(Selection, "a1").Select
For Each cell In Selection
If Not IsEmpty(cell.Value) Then
If cell.Value "2012*" Then
cell.Copy
cell.Offset(0, 5).PasteSpecial
End If
End If
Next cell
I have a to copy from column A some cells ( e.g "000005PR RODI T.R, S.L.") and paste it in column F. The problem is that in column A i have as well empty cells and cells that have date (e.g "2012 02 14-OCT-2011 CN 100725") . Neither the IF/AND nor the "double" if constructs are working .
View 3 Replies
View Related
Oct 8, 2013
The data exists in a spreadsheet that has Data from Column B2:CQ18, but it needs to be dynamic and update anytime someone clicks the button (the button is fine and works with all the other Macros)
Here is the code I have so far.
Code:
Dim LastCol As Range
Dim NextColPaste As Range
With Worksheets("Run Hours")
Set LastCol = Range("M3:M18").End(xlToRight)
Set NextColPaste = LastCol.Offset(, 1)
LastCol.Select
End With
That Code will Select the data in row 3 only and not the whole range of 3:18
I have tried Range (LastColData & "3:18").Select and that selects everything on the whole page from row 18 down.
I have done a lot of searching and for some reason this dynamic selection and pasting of data is escaping me this morning
View 1 Replies
View Related
Nov 15, 2013
I want to copy a cell from a column and paste it to next column and up one row. My current data looks like this:
DATA
1234
I want to make it look like: DATA 1234
View 5 Replies
View Related
