Recording Data In Sequential Rows Without Overwriting
Aug 12, 2008
I am working on multiple sheets that collate to an “averages” sheet. The Averages sheet would need to collate the information historically.
I need a code that can be assigned to a button so when it’s clicked, the figures for this week are added to the figures that were from last week. So for example.
Worksheet 10, Rows 12 – 20 have the data from the last 8 weeks.
Worksheet 09 has this weeks data and a button to push. When pushed it adds the data from this week to row 21 in Worksheet 10.
The following week the button would add the data to row 22 and so on.
Essentially each time the button is pressed it drops the information in a row one lower than the last time the button was pressed.
View 9 Replies
ADVERTISEMENT
Feb 5, 2007
cell A3 contains a drop down list of student names.
say, William is the 1st student listed on cell A1.
when William is selected his math grade shows up on cell B3 & his English grade on cell C3
I figured out how to make cells B3 & C3 change according to selected student from cell A3. All data comes from the Database Table, which is locked/unedittable.
Here is how my sheet looks like ....
View 14 Replies
View Related
Jan 23, 2014
I have a peptide sequence that is 4500 amino acids long. I have the numbers 1 - 4500 in column A and the corresponding letter code for the amino acid in that position in column B. I have done a bunch of other calculations and isolated small series of amino acids within the entire sequence (example: positions 25-42, 153-166, 381-297, etc).
I would like to fill column C with either a blank space or, if it is in one of the selected series, the letter code again. So that the first 24 rows of column C would be blank but rows 25-42 would mirror the letter shown in B. Then blank spaces again until we reach row 153, etc.
I've used a vlookup to paste the letters with the chosen parts of the sequence, but now I want to space them out along the entire 4500 so that I can see if there are overlapping areas between several sets of criteria for choosing series (these would go in columns D, E, etc).
View 3 Replies
View Related
Jan 3, 2010
The number of rows you are pasting and then you can select that same number of existing rows and use "insert". This is what I'm trying to achieve:
(before paste)
A
B
C
(after pasting unknown number of rows)
1
2
...
n
A
B
C
Is there really no built-in way to do this?
View 6 Replies
View Related
Jan 29, 2014
I have a form made that needs to copy a value from another sheet. The Form is 10 rows 5 columns and and in format for easy print. On sheet2 I have a column where each row is filled with a name.
I need to put this name into sheet1, so in the the appropriate cell I put =Sheet2!B2 and it gives me the value (name) from the other sheet.
Then I want to copy the form bellow the 1st one so that I have the same form but with the next name, which means I want =Sheet2!B3 to appear when I copy, but since my form is 10 rows when I copy it the formula copies to =Sheet2!B12 instead of B3.
I need to make close to a thousand of this forms ready for printing and I would like to avoid having to manually set the formula for the next cell.
View 3 Replies
View Related
Oct 9, 2008
I have a worksheet containing employee information (i.e. name, manager, department, etc.). I also have a userform that will be used to make changes to the employee information. The userform has three comboboxes and, when activated, the userform is populated with the existing data in the worksheet.
Here is the problem - I need to have the existing worksheet data populate (as it does now) but also have the combobox choices available in the event that one of the 'combo' fields need to be changed. How do I keep the existing worksheet data AND keep the functionality of the combobox?
View 3 Replies
View Related
Jan 19, 2008
I need to create a macro that will insert copied cells(cell range) from the clipboard into a cell on a different workbook and "shift cells down". The cell range in the clipboard will always be different and the position of the cell I select to insert the data into will also vary.
View 4 Replies
View Related
Aug 11, 2014
I have a large spreadsheet which I have extracted the data I need, but I am now having a problem tiding it up.
To simplify. I have 2 columns, both containing data formatted as text, each column has some data, but on different rows.
I need to merge the 2 columns without overwriting the data on the second column, with blank data from the first column, and without the column shrinking or growing.
Here is a section of my spreadsheet that needs merging : Excel-1.PNG
I have tried copy > Paste Special > Skip Blanks, but it just copies the column to the other - no merging.
View 1 Replies
View Related
Oct 8, 2011
I currently have an array that is 6 columns by 7 rows that is populated by referencing other workbooks and returning the sum of their values. For issue tracking revison etc... I would like to have the rows incrementally numbered (0,1,2... until it reaches number "X" which is a grand total in one of the fields.
This would happen for column 1 row 1 all the way through column 6 row 7 and fields with 0 as a total don't get a number or can have a 0 or blank.
Ex.
1 2 3 4 5 6 (rows)
1 3 x x x x x
2 x 7 x x x x
3 4
4
5
6
7
row numbering...
1
2
3 (skip col. 1 row 2)
1
2
3
4..... continues on till the end.
I would like this to be something somewhat automatic to eliminate the redundancy of having to manually perform this task.
View 2 Replies
View Related
Feb 1, 2008
This is so simple that I cannot even do a search for the answer. My worksheet has a horizontal and vertical cross. After row 16 for example, what is seen on the screen is row 24 for example. I did look at the instructions for "hidden" but I don't think this is a "hidden" issue. I don't want the rows to "jump" numbers, but want them listed sequentially down the page.
View 4 Replies
View Related
Jan 24, 2012
I will copy a report into sheet 1, starting in the same place(A1), on a weekly basis. The headers are: Item, Quantity & Price
Week 1's report shows the following:
Windows 5 $1.00
Doors 6 $1.50
Chairs 7 $2.00
Week 2's report shows the following:
Windows 3 $1.00 (change in quantity)
Tables 7 $5.00 (new item)
Chairs 7 $2.50 (change in price)
I need to have a rolling, unique list on Sheet 2 that will do the following:
- add new line items
- keep old line items while checking to see if the quantity or price has changed.
Therefore, after week 2's report is pasted on sheet 1, Sheet 2 should look like this:
Windows 3 $1.00
Doors 6 $1.50
Chairs 7 $2.50
Tables 7 $5.00
Here's the most important part: There will be formulas in Column D in Sheet 2 that I need to stay with each item. generating the desired result on Sheet 2!
View 9 Replies
View Related
May 9, 2013
I have amended the code below and have got it working. The problem I have now is that every time it loops it overwrites the data it wrote the previous loop
Offending line being ActiveSheet. Range ("A1: D30") = ValuesArray
I have known that somehow it should remember the last row and copy below this one but I cannot get it to work
Code:
Sub Basic_Example_1()
Dim MyPath As String, FilesInPath As String
Dim MyFiles() As String
Dim SourceRcount As Long, Fnum As Long
Dim mybook As Workbook, BaseWks As Worksheet
Dim sourceRange As Range, destrange As Range
[Code] ..........
View 1 Replies
View Related
Feb 17, 2014
I have a worksheet that has macro events attached to command buttons. When a ‘Start’ command button is clicked, a timer begins counting in seconds and displays the value in cell B3 until a ‘Stop’ command button is clicked. The event works flawlessly as long as I don’t open up another workbook (to continue working in Excel).
When the second workbook is open…then time stops working in the workbook where the macro was created…and starts displaying the ‘timer count in seconds’ in the new active workbook--which overwrites/destroys the data in the newly opened workbook. When I go back to the original book that called the macro…it continues counting again.
I need this timer to continue running in the workbook with the command buttons (in the background) while I work on other worksheets in other books. Is there a way to keep the timer running no matter how many other workbooks are opened and prevent it from overwriting whatever sheet is active? This code in the Increment Sub below ‘overwrites’ the contents of cell B3 on whatever sheet is active---and stops the timer in the on the sheet with the ‘Start’ command button.
View 1 Replies
View Related
Sep 5, 2013
- Construct a macro to import a csv-file to my worksheet named "Info". The data in the .csv-file should start in row A5 in my worksheet.
- If the worksheet "Info" already has data, I want to overwrite the existing data with the new data starting in row A5
The directory of the csv-file is C:Testmycsvfile.csv
View 3 Replies
View Related
Feb 19, 2008
The excel file has industrial information arranged by sector. The sectors are represented by six digit codes that are not strictly sequential. For example, a typical example of consecutive codes is 120011,120012,120030,120040,130011. There are upwards of three hundred sectors.
The data I am using is missing certain sectors - sometimes more than 30 at a time. I would like to find a quick way to identify the missing sectors and insert rows there, preferably with the first cell in the row being the missing sectoral code.
I have a similar problems with columns as well. But I can always just transpose the data and use whatever solution works for the rows.
View 9 Replies
View Related
Sep 19, 2012
I have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB:
Sub CopyRow()
Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0)
End Sub
View 9 Replies
View Related
Jan 30, 2013
I'm linking my excel document to a table on the web. The source only ever shows the last 50 orders but I would like to retain the old data when refreshing so I can see further than just the last 50 transactions. Is there any way for excel to insert rows for any new data? All the options when linking to the source seem to clear the old data.
The table looks something like this:
Timestamp OrderID Description Filled
View 1 Replies
View Related
Jul 13, 2005
In A2 is the Stock price, and B2 the time of the update.Now every time it updates A2 and B2 get overwritten.I need some code that will save/ record the the stock price on the hour, every hour. I then need the highest and the lowest price within that hour, and lastly the price at the very end of that hour. (example)
A.........B.................C.........D.........E...........F..........G
stock...time.............time......open....high.......low.......Close
.60......16:45:33......14:00....40........90.........30........60
............................15:00....65........78.........65........62
............................16:00....62........72.........58........58
I received what I think may work, but I dont know how to write this in VBA. If the time of the new value received > than B2 + 1 second, create new row where Open=High=Low=Close else if (last column=new value,if new value>high column then high column=new value,if new value<low coulmn then low column=new value.)
View 9 Replies
View Related
Sep 17, 2009
I have tried many different ways of coming up with a solution of this problem without writing a VBA program, however, Excel's date and time formatting scheme seem to be tripping me up. As a result, I am trying to figure out what direction to go.
I have seached the board up and down looking for a solution and I have found one problem that is midly similar but I do not fully understand the code. I have tried to modify it but to no avail.
Here is my problem:
I have 9 columns of data that are reported in 15 minute intervals for a little over 3 years. There are missing data in the data set and it would be infeasable for me to manually find and replace the missing data. (Over 110000 rows of data)
Example of data (Where "/" delienates column seperation):
Date / Temp 2m / Temp 10 m / Radiation / RH / WindAve / WindMax / WindMin / Rain
6-1-06 12:15 am / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-1-06 12:30 am / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-1-06 12:45 am / 45 / 35 / .0001/ 95 / 5 / 7 / 3 / 0
6-2-06 6:00 pm / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-2-06 6:15 pm / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
So what I need to do is this:
1) Find which data times are missing
2) Add the appropriate amount of rows in between where the missing data would be
3) Add the correct dates to the new rows
4) Add "N/A" to the columns that have no data
You can see that my date and time are formatted in mm/dd/yy hh:mm
I found this on the website and was trying to modify it to my needs:
Sub InsRow()
Dim c
View 9 Replies
View Related
Feb 12, 2012
I want to record the amount of people attending a venue over a given period. The information presents names and did they attend. In column "D' from D5 to D45 the information will be yes or no. I want a formula that calculates the amount of YES and shows the answer in a numeric format
View 4 Replies
View Related
Apr 13, 2012
I have it all set up already with macros and formulas and such. My next step is to record the sales data ( selected cells ) from the invoice to a seperate sheet I call Cashup. The idea being to record all relevant sales data for the day/trading session on one sheet so the manager can cash up the till run by 2-4 different people during the day. Its targeting a small family run business so security isn't currently the main concern although for future proofing I'm trying to build that in as far as possible. Long story short: What would be a good method for recording each successive sale's data from the same page each time the Finish button is hit , to a seperate sheet in a log format? Currently I have these problems:
1:The operation should record into the next open row on the Cashup sheet and not overwrite the previous record.
2:The record must ignore all formulas and record only the values in the cells . Currently a normal copy and paste results in " N/A" recorded in the cells in the Cashup screen.....( probably since all the data that needs recording is formula generated to begin with )
View 3 Replies
View Related
Sep 11, 2013
I am trying to collect data from a server. The data comes through as .csv (seperated data), and I am able to get all the useless info/columns out of the way - but I would like to keep a record of how many times these "alarms" come in. form a spreadsheet, or tell me how to go abouts using a tool to simplify my process.
View 1 Replies
View Related
Jul 21, 2007
I am looking for a way to define a 'Data Validated' Cell to hold a List of Dynamic Sequential Numbers - from 1 to the Value of cell A4. For example:
If cell A4 has a value of 5 the 'Data Validated' List will be 1,2,3,4,5
I have tried to 'name' the Array-Formula {=ROW(INDIRECT("1:"&A4))} and put the 'name' as the List source but without success.
View 8 Replies
View Related
Mar 14, 2013
I have 2 sheets similar to below :
Sheet1
apple pc
sony camera
lenovotablet
apple laptop
Sheet2
sony television
lenovopc
I need to compare Column A from Sheet2 with Sheet1 and where the values match, only replace THOSE values in Column B of Sheet1 with those in Column B of Sheet2. Hence, after the replacement, Sheet1 should look like (value for apple remains unchanged).
apple pc
sony television
lenovopc
apple laptop
What would be a formula that would do it ?
View 1 Replies
View Related
Apr 16, 2013
I have this sheet, which is just an example (the actual one has many more records).
subset.xlsx
I received this sheet (again, example)...
new.xlsx
I need to add the new sheet to the old sheet, so that they are merged into one sheet. Also, if the same "LOC" appears in both sheets, I need to overwrite all the records for that "LOC" in the old sheet with the records from the new sheet.
View 3 Replies
View Related
Apr 22, 2014
My code is working with respect to finding the right data, but it keeps overwriting itself on each loop through...I need it to copy/paste and then on the next loop, move down one cell...
[Code] .......
View 1 Replies
View Related
May 14, 2009
Perhaps, this question is much more related to Windows API but I thought of posting it here incase I get some more ideas.
I am looking forward to develop a program wherein I can prevent or avoid an Excel file being overwritten by a different file with the same name in the same location in windows explorer.
After a rapid search on the internet I have got something which I could use but that would just serve me the purpose of retreiving the overwritten file in windows explorer.
View 9 Replies
View Related
Mar 30, 2007
I have a problem with a certain tool that i've been trying to develop.
I have two sheets in my workbook. In the first one i choose a value from a list (in cell A2). After the value in the list is chosen, certain integers for that value appear in the right columns. (with blanks between them)
Next, I will press a button called "calculate" which works like this: If A2 can be found in Sheet 2 Column "Value" then the macro overwrites the integers found at the right of the A2 from those found in Sheet1.
If Sheet1(A2) is not found in the Column "value" then a new line is inserted at the end of the table like this.
A 1 3 6
Pls help me with this, I have a very close deadline and I don't think I can pull this off by myself in such little time.
View 9 Replies
View Related
Aug 11, 2007
I have some code written to duplicate a template and rename the copy to "Working Copy".
But if I run the code more than once, it breaks as VBA tries to overwrite the sheet with the same name.
Would I would like is for the macro to check to see it already exists and duplicate the copy with some type of incremental integer. Thus the first duplicate would be Working Copy 1, and if the macro is run again, the duplicated copy would be Working Copy 2, etc.
here is what I have so far:
Sub SCButton()
Dim i As Integer 'for making Working Copy 1, 2, etc.
Sheets("SCTemplate").Select 'this file will eventually be hidden and thus the user with only see the wokring copies.
Sheets("SCTemplate").Copy After:=Sheets(4)
Sheets("SCTemplate (2)").Select
'some sort of If statement here to check for the sheets
Sheets("SCTemplate (2)").Name = "Calculation"
View 5 Replies
View Related
Jul 1, 2014
The two sheets are...
1. Sheet1.xlsx (regular excel sheet as the extension is .xlsx)
2. Consolidated.xlsm (macro enabled sheet as its extension is .xlsm)
1. Copy both the files on your system under a particular folder.
2. Now make 9 replica's of Sheet1.xlsx and name them as Sheet2, Sheet3, Sheet4, .......... Sheet10
3. Open the sheet Consolidated.xlsm and see the button i have added called "Pull Data".
Now write down the code by adding a Module in that excel sheet from the code window.
4. Write a code that will open each of these sheets (Sheet1, Sheet2, Sheet3, Sheet4, .......... so on) one at a time and will copy the data from these sheets to the Consolidated.xlsm sheet.
5. Make sure that the data is appended(and not overwritten) from the multiple sheets (Sheet1, Sheet2, Sheet3). that is once you paste the data from sheet1 to Consolidated.xlsm then the Sheet2 data will be pasted at the end and after that sheet3 data will be pasted and so on..
6. In this way at the end we will have all the data from Sheet1, Sheet2, Sheet3...in the consolidated sheet.
7. The Division column in the Consolidated sheet will have the value of first row in these multiple sheets. So after making the replicas of Sheet1, please change the value in first row (Range A1) to any other value to avoid the confusion.
8. I have highlighted the data for two sheets in yellow and grey color in the consolidated sheet.
View 8 Replies
View Related
