Pick Cell Based On Multiple Cells
Feb 5, 2009I want the 'Model Number' to automatically be picked based on the numbers entered into Sheet1 B1 & B2. The model numbers are listed on Sheet2.
View 4 RepliesI want the 'Model Number' to automatically be picked based on the numbers entered into Sheet1 B1 & B2. The model numbers are listed on Sheet2.
View 4 RepliesWorksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
How multiple cells can be formatted based on one cell value. See the screenshot attached to understand what I am trying to achieve. I am very new to excel formatting, vba etc.
ExcelFormattinQs.jpg‎
When I enter barcode X in cell A1, I want B1 to say supplier and C1 to say product name and D1 to say package quantaty etc.
And if I enter barcode Y in cell A2, I want B2 to say different supplier, and so on, hopefully you get the picture.
I'm trying to place the value of "X" in multiple cells based on a cell variable (i). For example, if (i) is evaluates to 35, the following code ...
View 8 Replies View RelatedI have just started to learn how to use vba in microsoft excel. Over the past few days i have been creating a drawing register and have incorporated multiple routines based on searching this forum. Up until this point i have foud everything i needed on this forum, but now i cannot work out how to creat a routine that does the below.
The setup
*I have a folder called Zircon Plant
*That folder contains 3 folders 01. Superseded, 02. PDFs and 03. Documentation (the 01. Sup...etc. is the actual folder name, the 01, 02 and 03 isnt distinguishing the 3 folders)
*The Register is located in 03. Documentation
*The PDFs i want to hyperlink to are located in 02. PDFs
What i want to do
*i have 2000 rows of drawing names
*the drawing name in excel is spread over 5 side by side cells on each row (rows 21 - 2020) so for example the first row the information is in cells (H21, I21, J21, K21 ,L21)
*the cells i want to contain hyperlinks are V21 - V2020
so what i want is when excel opens up (i already have another script running at startup so i will be placing this after the other startup routine i have) i want it to search in folder 02. PDFs using the contents in (for example the first row (21) and colums HIJKL contain (H21)4CP(I21)-(J21)D(K21)-(L21)55000) each row and combine those cell contents to find the file name 4CP-D-55000.pdf. I then want it to go down every row until row 2020 untill it has added all pdfs.
(The second row is (H22)4CP(I221)-(J221)D(K221)-(L21)55001.....file name would be 4CP-D-55001.....third row would be 4CP-D-55002 etc...)
If such a pdf with that name doesnt exist, i want the cell (for example v21) to read "PDF not available"
based on a search here i have been able to do this for 1 cell, but dont want to do 2000 seperate routines. the current routine i have for it to work on one cell is
' Select PDF range
ActiveSheet.Range("u21").Select
' Promt PDF Hyperlinking
ActiveCell.Hyperlinks.Add ActiveCell, "I:DraftingAs Built4CP - PinkenbaE - ElectricallZircon Plant02. PDFs4CP-D-55000.pdf"
I also have multiple sheets. the first sheet is D - Documentation. I will eventually copy this routine 4 more times as i will be able to work out how to apply it to the other sheets
I need to return the specific text of a cell based upon the text in multiple cells.
Worksheet as follows:
Asphalt Sub:
BLDG1-Backwash 1
*BLDG1*
*Sub*
BLDG1-Backwash 1 OverEx
*BLDG2*
*Sub*
[Code].....
I have three columns thus far. I need to add another column and search all items in Column A using the criteria in Columns B and C. For instance I need to search for BLDG1-Backwash Sub: and place it into column D using the criteria in Columns B and C.
If possible, I would also like to remove both the words, BLDG1 and Sub from the result so then it only shows "Backwash".
My spreadsheet is much larger than this and I have muliple buildings I am dealing with, sometimes 30-40.
I've an excel sheet...where I want to color the cells on the basis of following condition:
If Cell E is non-empty then cell A, Cell B, Cell C, Cell D, Cell F, Cell G, Cell H and Cell I can not be empty. If any one of the cell is found empty then color the respective cell in red!!If collectively all the cells Cell A, Cell B, Cell C, Cell D, Cell F, Cell G, Cell H and Cell I contains a value and Cell E is empty then highlight the Cell E in red color.
I want to implement this in module section...
get other cells in a spreadsheet to populate with the Saturdays of a month based on the date input in another cell.
Example
A1 = October 2014
The following cells would automatically display:
A2 10/04/14
A3 10/11/14
A4 10/18/14
A5 10/25/14
A6 11/01/14
Then if cell A1 is changed to March 2015 the following cells would automatically display:
A2 03/07/15
A3 03/14/15
A4 03/21/15
A5 03/28/15
A6 04/04/15
I can't seem to find a way to get just the Saturdays. +7 doesn't work because Saturday is not always the 7th day of the month.
I am trying to create a UserForm in Excel 2010 that will look for a part from our database (or on a specific Sheet, possibly a hidden sheet), then add specific data from that part's row into a new line.
More Specifically:
| Part # | Description | Category | SubCategory | Cost | Labor Hours | Weight | Etc |
I want to be able to input the Part #, and have it automatically add specified information to sheets 1 and 2 and those two differ. 1 is our Quote Sheet, and 2 is our bill of materials.
Also, I need each piece of information to go to a specific column (ex. Cost always goes to Column K)
What I have now is a broken UserForm that references a DOC file with a Table, but I need something a good but more complex.
Ideally, what I want is to have 4 ListBoxes where you choose Category --> SubCategory --> Make --> Model then have several CheckBoxes below that would determine whether to add a part (Cost, Labor, Weight).
The reason for this is because we have no need for the Cost or Labor Hours in our Bill of Materials, but need that information for our Quotes. And we generally don't need Specific Dimensions in our Quotes, but DO need them in the Bill of Materials...
Can I make it so that it will insert Pre-Specified information into both sheets at the same time?
Now the problem, Each client has a sheet in a workbook. In each sheet, I input the number of days of service available to that particular client in a single cell. We'll say cell [G8] is the cell used for this input in all sheets. If the client has 30 days of service available then we type [30] in cell [G8]. Each sheet is a 100 day template. I want to shade in dark grey and lock from input the days NOT available to the client based on the days of service input in cell [G8]. If 30 days of service are available in cell [G8] then the remaining 70 days on the 100 day template would be shaded dark grey and locked from input. That is, day 31 through day 100 of the template would be locked and shaded. Each individual day has multiple cells in a column. I want to lock and shade each column of cells in each day not available.
View 5 Replies View RelatedI am trying to find a way to write a Macro that will auto color multiple cells based on what data is displayed in one cell. The cell I want to reference is a vlookup cell.
Basically this is a part label. And depending what part is selected from the list my vlookup will display its position on a vehicle(i.e.. FR, FL, RR, RL, Etc..). So if vlookup comes back with FR I want the various cells on the label to be orange, etc..
ALSO: if there is a way to embed it so it does this automatically (rather than run the macro each time).
I'm using Excel 2007. I would prefer to stay away from the scripting side of the house if possible. This is basically a 3 day forcast weather chart. The top is the actual weather data, the bottom portion is a color coded reflection of how the weather affects various things.
This product is created in excel, but will be embedded into a powerpoint. It will be updated daily. Here is what I would like. I want the color chart at the bottom to update automatically based on the data I enter above. I have a grasp that I can update the color through conditional formatting, although im not exactly sure what that will look like with all of those cells.
I also figured out that I can insert the letters in those lower cells with something similar to " =IF(C6>90, "T", "") " which would put in a 'T' for Temperature when the temperature got above a certain degree.
I run into a problem when I have multiple factors affecting a single cell. For instance on the example in day 2 of my image. Personnel are affected by Temperate AND UV Index. How would I set up that cell to pull that information from both of those cells and display it accordingly? I would prefer the letters to stay separated by the comma, but I could live without that. The default cell color will be green, with the potential to be yellow or red. I left a few examples of possible situations on day 2 and 3.
I would like to randomly pick a name based on percentage. In the example below Deb takes up 50% of the wheel, if you were to spin the wheel she would have the highest chance of landing on the dial. How you could make excel randomly pick a name based these odds. The list will have over 50 names and each name will be earning points throughout the year. The more points you have the higher percentage of the pie you get and the higher your odds off getting picked in the lottery.
View 9 Replies View RelatedSee data in the attached image in Col A thru Col D. In Col E, I want to populate the max value for the same part # from Col C or Col D depending upon value in Col B.
I have included a sample of the expected results in Col E for illustration purposes.
For example Row 3,5,6 are all part # 1 with Col B ="Y", suggesting they are interchangeable parts, therefore, I would like the formula to have ability to pick 10 (since its largest between 3,10,0) from Col C.
Capture5.PNG
Import Multiple Text Files & List Names
I would like to use FileDailogFolderPicker object to prompt the Excel User (me!) to browse to the location of the folder which is required to execute the code below; at the moment I have to change the file path in the VBA code each time I run the macro. The code is run on a Click Event button at present.
Private Sub GetGPCFiles_Click()
test
End Sub
Sub test()
Dim myDir As String, fn As String, ff As Integer, txt As String, a()
Dim x, i As Long, n As Long, b(), t As Long
myDir = "Y:DCCRSP07RSPWE191007131007GPC" 'Have to input this path manually
fn = Dir(myDir & "*.gpc")
Do While fn <> ""
ff = FreeFile
Open myDir & "" & fn For Input As #ff
Do While Not EOF(ff)
Line Input #ff, txt
x = Split(txt, ",")
n = n + 1
Redim Preserve a(1 To n)
a(n) = x
Loop
I have 2 workbooks:
-1st workbook, I am using a worksheet (let's call it workbook1/worksheet1) already running with macro. In this worksheet, there is a column "Protocol" where different protocols are named (some are repeated, not sorted)
-2nd workbook, there is a worksheet (call it workbook2/worksheet2) are just the list of description for each protocol listed in workbook1/worksheet1. For example: width, length, height
How do I get values found in workbook2/worksheet2 and use in workbook1/worksheet1 for each corresponding protocol?
I have a blank log template on one sheet, On this I need to be able to enter two variables that tell other cells to pick info from the next sheet. The two variables being 1) Date and 2) DAY SHIFT or NIGHT SHIFT.
On the next sheet is an archive of data running in columns with the dates in row1 and the denoted shift (day or night) in row 2. The rest of the relevant info is in the columns below each date and shift
What formula would I use so that the log template cells fill with data from the archive when the date cell and shift cell data is entered.
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
I would like a macro that select all cells based on multiple criteria. It's a big sheet, but I've made it smaller in the following example.
In row 1, there are 2 headers, in B1 (electricity) and C1 (gas) In column A, there are 3 houses, in A2, A6 and A10. The blocks of cells in between (e.g. B2:B5) have 2 headers, 'period' in B2, and 'account number' in B4. B3 and B5 have a list of options in them.
I want to select cells that meet certain criteria. Either electricity or gas, and either period or account number. So, if in cell D1 I choose electricity and in D2 period, I would like to select B3, B7 and B11. If I choose gas and account number, I wish to select C5, C9 and C13.
I’m trying to change color in cell B9 according to different conditions in Cell C9 (than on b10 according to c10 and so long until necessary - probably will be around 2000 lines). Since there are more than 3 conditions and in two cases condition depends on the color of the C Column, I can not use conditional formatting. I’ve searched and found similar forums here, but since I’m ignorant in VBA code, I couldn’t manage to make adjustments. So if you can help me with the code, I would really appreciate it!
Condition and Results required would be:
IF column C = “S” than on Column B = color cell light blue with white border
IF column C = “P” than on Column B = color cell Green with white border
IF column C = “A” than on Column B = color cell Yellow with white border
IF column C = “L” than on Column B = color cell Red with white border
IF column C = “C” than on Column B = color cell Dark Blue with white border
IF column C = “ ” than on Column B = color cell white
IF column C = “V” and has white background than on Column B = color cell white
IF column C = “V” and has a Dark Grey background than on Column B = color cell Dark Grey
I don’t know if the last two are feasible.
Text configuration - how can I tell a cell to pick up a phrase from one cell, but if that phrase is equal to one particular phrase, then produce a blank.
View 3 Replies View RelatedI want a macro fill the value which is on the upper cell.
eg:If A1= Code and A2 is blank, A2 should be filled with A1 value which is 'Code'.
In the attached, I want C3,C4,C5 to be filled with 'A' which is in C2,
likewise I want C7,C8 to be filled with 'B' which is in C6 and C11 to be filled with 'C' which is in C10, likewise the data has to be filled in entire C col.
I have a formula that looks like this : ='G:STOCKS[1001 Stock.xls]Matl%'!$I$32
There are hundreds of similar formulas, all referencing different cells in the same file. The “1001” bit refers to the date, and next month it will need to say “1002” to pick up the new month's file. I would like to hold the “1002” bit in a cell (say A1), so that at month end, I just change that one cell, and all the formulas will point to the new file, but I’m not sure how to work that into the formula.
How can I add multiple cells (ranges) to a listbox, and when the user clicks one, it will activate that cell in excell. I thought about have the list box for the text, and a corresponding array that holds the actual range or address, but I cant get it working.
Long version:
I have a search feature that, when you type a name, it searches through a column and finds the name. Now if there are multiple matches to your string, I want it to add the full name to a listbox, and have the user pick one from the list to activate.
So basically, if I search for the name "john" but theres multiple people with that name ("john doe", "john smith", & "john mazz"), it would add the three to a list box, I would pick one from the list, and it would activate that cell.
I have everything done except that last part. I have it adding multiple matches to the list box, but I cant figure out an easy way to activate the correct cell when double clicking the item in the list. I could have it search again for the selected full name, but there is likely to be a case where one person is entered twice.
In my attachment, I have a worksheet where I need to pick a rating from a combo box or list (Expert, Leading, Applying, Learning, Under Performing). I will be picking this rating 10 different times on this worksheet and the selections will not be the same in all cases so the definition I need won't always be the same.
I would like to return the definition (definitions are detailed on another worksheet, Data Elements) to the cell to the right.
I've tried IF statements but when I make one selection from the combo box, all the combo boxes select the same thing. I've also tried vlookup but can't figure it out and can't find an explanation in layman's terms.
I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.
I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).
The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.
As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.
The log code in column "H" Is based on this criteria:
First Letter of the Unique ID in column "E" - O, M, or L
Program Type in Column "F" - U or R
1. O-U = U
2. O-R = RU
3. M-U = U2
4. M-R = R2U
5. L-R = R
You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.
This is the area where my skill at using scripting dictionaries fails.
The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words
if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")
So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)
Here is my code so far.
VB:
Option Explicit
Sub test()
Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long
Set dic = CreateObject("Scripting.Dictionary")
[Code].....
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet)
what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14.
if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health