On user1.xls workbook. THe user click on cmdBtn4, it'll open template.xls file then populate 3 sheets(define, products, outlets) in User1.xls from template.xls. The others are working, except for products sheet.
As you can see, the template didn't work because of the changes made in the middle(breaks the consistancy). I traced the code and found where the problem lies (code in red), the code takes the 1st Row of uom. The rest for uom isn't registered. The outlet column is taken from the sheet Name.
The correct output in the products sheet would have 6 entries instead of 3: ...
2 sites are better than one, eh, cos i think this is very tricky. If anyone suggests a solution I'll ensure both sides are kept up to date to ensure nobody wastes their time.
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009 If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
I'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").
I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...
I have values in COlumn A, probably about 50K rows, The total unique values on the column A is only about 27. I need to capture all those unique values and paste them in column B. I didn't want to do "Advance filtering" since the workbook has many macros's on it that the user simply click on. Im thingking of creating a loop and compare values already pasted in Column b but then that will take too much time to complete the loop. Is there any easier or yet more efficient way to accomplish this?.
I am trying to find a way to populate a column based on the changes in the data of another column...
For example, I want to fill in the code column....so when the customers cost changes, I want a numeric code to populate & change. So for the first 5 lines, the code could be 21, and then when the cost changes to $37.51, want the code to change to 22.
I'm looking to populate my Helper Column with all duplicates from my Data Column. Please note that my helper column needs all instances of a duplicate.
Data Column Company ABC Business DEF Corporation GHI Business DEF Company ABC Business DEF
Helper Column Business DEF Company ABC Business DEF
The formula needs to be dynamic and it will need to be able to be copied down.
I am creating an inventory list for a lab, I have a column called "reorder" and another column called "price". Is it possible to have a checkbox, or if I put "x" in the reorder column, the price for that particular item will appear in the "price" section.
Then I will have a total field and any prices that populated will calculate the total price?
I have data in cells A2 through A6. How do I auto-populate that same data in cells B1 through F1 from the data that is in A2 through A6? Essentially, I want to populate a ROW from a COLUMN without having to retype every cell.
I have a quick question regarding combo boxes...and I may have to use VBA.
I want to have users select a value i.e. Fish from a down box. Once the user selects fish all instances for fish populate i.e. Trout, Salmon, Tuna, etc. in the adjacent column.
The list of fish can be in the same workbook or a different workbook as well as the value.
I am trying to populate a combo box with two columns of data read from two consecutive (or non consecutive) columns of data. The following code is what I have come up with after visiting several of the previous threads on similar topics (couldn't find one that gave a general, concise solution).
Private Sub UserForm_Initialize() Dim lngRow As Long Dim lngRowtot As Integer Parameters1.SG1.Clear 'Clear combobox SG1 in userform named Parameters1 'Find the number of rows required for the array and combo box lngRow = 12 'Start searching on row 12 Do While Sheets("Timber Properties").Range("H" & lngRow).Value <> "" 'Read until empty col H lngRowtot = lngRow - 11 lngRow = lngRow + 1 Loop Dim MyArray(1 To lngRowtot, 1 To lngRowtot) As String 'I get an error with the last ingRowtot on this line.....................
I am trying to find a formula that will automatically populate two columns on the same worksheet that a date is being entered in a different column. We train 468 new bus drivers every year and to accomplish this, we run 26 classes of 18 students with a new class starting every two weeks at our training facility. Each class is in training for six weeks (30 working days). The first 19 days they are under the instruction of our full-time instructors. The next nine days they are out on ‘line instruction’ with regular drivers. On days 29 and 30 they are back in the training department for final evaluation and graduation. On Day 31 they are turned over to Service Delivery as regular full-time drivers.
If I enter a class start date of April 6, 2009 in cell B4 on "2009 Conventional Classes", the formula would automatically fill in D4 and E4 columns with dates that are 29 days later and 31 days later respectively but, would skip weekends and any statutory holidays (these would be represented by a different background color on the calendar templates).
I am hoping to populate a column with data from another worksheet. Basically, I have a set of columns, one for Location, Zip Code, Longitude, and Latitude. I want a formula to say, if the location equals X, then pull the associated information from the other worksheet. -- I assume it would be an if or vlookup, or combination.
I want to populate a row with text "OFF" if a cell in column A is blank, I need the text to be from column F to Column S, I have a bit of code that finds the blank cell in column A and populates the cell in column F, modifying it to extent to column S.
I am using Excel frontend and Access backend for my project. Now I want to write the code that will execute when the userform1 is loaded and populate data from Access table in to the 2 column listbox. I have written the following code but that doesn't work properly.
And it works as I need it to returning the value that appears the most from L31 to L6621. My problem is the number of rows will continue to change. So I tried something like this
Sub ARBM() Dim lr With ActiveSheet
[Code].....
But I get a compile error with expected end of statement. How else can I write this?
I have a form pop up when user runs a macro and it populates the form beginning with ActiveCell. How do I always populate the form beginning from column A (row based on ActiveCell)? It would be really helpful if I could just set cl to take the ActiveCell and back it up to column A.
I was wondering if there is a way I can fill in the region and country columns automatically -i.e. through a script or function or macro based on what is entered in the town row/ field
e.g
Town= Cheltenham
if the town is Cheltenham, I would like the corresponding region column to pollute with glouctershire
I need a macro to do something very easy. I have blocks of data in an excel worksheet separated by one column. The First block begins in column B and ends in col G. Next block begins in column H and ends in L.
I'd like to copy the value from the first cell in the start of each block (b1) and paste it in the left column seperating each block (left empty column - a1) all the way down to where the data in that block ends (b60), and do this for the next column. So in the above exmaple it would populate column A (range a1:a60) with the value from cell B1.
The number of columns is the same but the number of rows vary. The value to be copied is always in the first row and first colunm of where a data block begins - so in the case above - b1, h1 etc.
How I can refer to sheet...Without activating sheet. i have this
Private Sub carga_click() Sheets("Codigos de Area").Select Sheets("Codigos de Area"). Cells(1, 2).Select While ActiveCell <> "" ActiveCell.Offset(1, 0).Select ComboBox1.AddItem ActiveCell Wend End Sub
let's say you have array like this: ___A__ 1|value 2| 3| 4|value2 5| 6|value 3
and you want to populate (copy, move values in) the empty cells ___A__ 1|value 2|value 3|value 4|value2 5|value2 6|value 3
this code will do as long the last cell in the array is not ""
Sub PopB()
For LoopCount = 1 To ActiveSheet.Range("a65536").End(xlUp).Row If Mid(Range("a" & LoopCount), 1, 1) <> "" Then _ TheQuestion = Range("a" & LoopCount) Range("a" & LoopCount) = TheQuestion Next End Sub
I would like to populate a combobox with text from two different ranges:
I have an ID No in column A (range = ID) and a descripton in Column B (range = Description)
I would like the following to appear in the combobox:
"J.034 Kitchen Bench" at the moment I can only get J.034 from the following Private Sub UserForm_Initialize() Dim cBase As Range Dim ws As Worksheet Set ws = Worksheets("Matdata") For Each cBase In ws.Range("ID") With Me.cboBase .AddItem cBase.Value .List(.ListCount - 1, 1) = cBase.Offset(0, 1).Value End With Next cBase Me.cboBase.SetFocus HideTitleBar Me End Sub
15.png Attached is the file & snap shot for the problem.
TABLE A [table="width: 500, class: grid"] [tr] [td]Catagories state names devices A4-100HP A ALT
[Code] .....
TABLE B Catagoriesstate names devices A4-100HP A4-101MP A4-102AP
[Code] ....
In above condition we want to have an automatic filling up of data in table B in column (name & device) but it should match first with state name with category codes of table B & then same with table A in order to avoid any wrong entry because in table A certain states are repeated but codes are unique so we want that filter should match two column of each table before filling data in table B.
I have 2 columns in FINAL list: A product number and a price. The product number is full, the price one isn't and it's the one I want to fill. I have several other TEST lists with the same two columns, and both are full. I need to have excel check to see if a value in the product number column matches one in the FINAL list, and, if so, to copy the corresponding price value from the TEST list to the proper corresponding place in the FINAL list.
I am trying to auto populate into a column that starts in cell E5 and references cell C5 (along with a dataset in N and O). In cell E6, I copied and pasted this formula and changed all of the C5 values to C6. When trying to use the auto populate cross hair tool, excel changes all N and O cells, from O165 to O166, O167 when they should have remained O165 and N165 for every cell.
