Populate Form Always Starting From Column A

Jan 20, 2009

I have a form pop up when user runs a macro and it populates the form beginning with ActiveCell. How do I always populate the form beginning from column A (row based on ActiveCell)? It would be really helpful if I could just set cl to take the ActiveCell and back it up to column A.

View 7 Replies


ADVERTISEMENT

Auto-Populate Order Form From Storeroom Count Form

Jun 17, 2014

I have a spreadsheet I use to keep track of weekly sales patterns and use for estimating the amount of a product I would need to order taking into account what I would expect to sell in a given week and what stock I have at present. On the example I've attached, I show where I enter my storeroom count figures, which are organised by supplier and the position in which a particular product appears on the supplier's order form. I have a page which lists the orders by suppliers and which are used to place the orders by e-mail or telephone.

At present I have each supplier section of the order form directly linked to a cell on the storeroom count as per columns K to M on the attached file. However, this means that as products are de-listed by suppliers and extra products become available, I have to edit the formula in each cell as the products now appear in a different position on the storeroom count and may otherwise end up on the order form for a different supplier. I would like to set it up so that I just have to select the supplier name and the table below will automatically fill with the required info, in order of the position they appear on the supplier's form. I'm struggling to combine vlookup and hlookup. Is there a way to do it or do I need to rethink?

View 4 Replies View Related

Populate A Given Number Of Rows Starting At A Specific Location

Jun 2, 2014

I have a spreadsheet where I track resources needed on a project. Each resource that is selected in the resource column has a corresponding % avg and an average number of months where the resource is used. % Avg and # of Months are found in a different worksheet.

What I am looking to do is, for example: if resource A will be on the project starting in May 2015 and assigned at 30% for 7 months, I want to populate 30% starting in the colunm labeled May 2015 and copy the 30% so that a total of 7 months are populated. Also, if any of the values change (i.e: the Resource Name or the Start Month) I want to erase all the percentages that were entered in the row. How can I achieve that with a VBA code? I have formulas that retrieve the # of Months and the % Avg already.

These are the columns that I have in my spreadsheet:

Resource NameStart MonthJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15Aug-15Sep-15

View 2 Replies View Related

Date Column (insert In The First Column Dates Starting From 01/01/2000 All The Way Up To Today)

Nov 11, 2008

I'm trying to create an excel worksheet as follows:

Column1 Column2 Column3 Column4 Column5
Date Time In Time Out Hours Worked Pay
01/03/2000
01/04/2000
01/05/2000
.
.
11/11/2008

I want to insert in the first column (Column1) dates starting from 01/01/2000 all the way up to today, 11/11/2008. So I would end up with a unique date on each row.
To accomplish this manually would be a daunting task. I'm a newbie to excel and don't know how to use any in-built functions.

View 3 Replies View Related

Populate Web Form With Macro

Aug 15, 2014

I have a problem after filling in some forms on specific third party site;

After filling in all fields and giving the order to save the info, the fields which had the correct info return to blank, and nothing gets saved on the web page...

Here's how my code looks like...

Sub testing()
Dim IE As Object
Set IE = CreateObject("INTERNETEXPLORER.APPLICATION")
IE.NAVIGATE Range("a1").Value

[Code] ......

View 2 Replies View Related

How To Populate A Text Box In A Form

May 5, 2009

I have created a form (example attached)

In this form when Lot ID is typed in and hit enter to go to next box, I like to search that lot ID in 'Processing" sheet and populate with corresponding date in the next text box. I hope someone can help me on this.

In real time the "processing" data is in a different workbook and sometimes is not available to the operators.

View 6 Replies View Related

Populate Form From Row In Sheet

Dec 29, 2007

how I populate a form with values from a row in my excel sheet that i selected in a multicolumn textbox.

My "tool" works like this... The user opens the excel file and can choose one of two buttons, Add defect and Find defect. When the Add button is clicked Form1 is opened and the user fills in a number of fields which are then inserted into an excel sheet (same book though). Then there's the Find button. When the user clicks this button Form2 opens with a multicolumn textbox that displays some of the columns with some of the previously inserted information. Now I would like to be able to select one row and get Form1 populated with the values for that particular row. The user should then be able to change some of the values and the changes should be inserted back into the correct row in my excel sheet. How in the world do I do this??? Right now I just open my Form1 when I select a row and click an OK button. How do I get the values from my excel sheet back into my fields?I've tried to copy code from an example I found, but I can't get it to work.

My first form where I add my data

Private Sub UserForm1_Initialize()
Dim rIds As Range
Dim MaxId As Long

Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp))
MaxId = Application.WorksheetFunction.Max(rIds)
With Me
.IdBox.Value = MaxId

View 9 Replies View Related

Populate Selected Row From Form

Jan 8, 2008

Thought it was better to start a new thread than to continue the old one since the focus in that thread was to get the values into a form and the question this tme is to get the values back into the correct row.

Background. My little application does the following...
In Form1 the user adds information that is inserted as a new row in my excel sheet. A unique ID is created and inserted in column A.
In Form2 the user sees a listbox with the rows in the excel sheet. The user then selects one of the rows and get all the information including the ID displayed to him/her in Form3.
In Form3 the user should then be able to update the values (except the ID) and then the values should be inserted back into the excel sheet in the correct row. I suppose I need the code behind my OKbutton to say something like

If Column A = value of IDBox, insert values in columnB, columnC etc...
But how do I write this code correctly?

View 9 Replies View Related

Populate User Form

Jan 16, 2007

I have created a user form for which I would like to do the following:

1)Select Last name using a combo box and with this all other fields should be automaticallu populated

2) If I make a change on the user form, it should update the relevent cell as well

All data is in the sheet 'Staff'

View 7 Replies View Related

Populate More Than One Worksheet From A User Form

Oct 19, 2009

I've only just starting using Excel for anything other than basic calculations and have got a little stuck with a user form. On my attached spreadsheet I am trying to set up a form for staff incident reporting. There is a Contents worksheet and then each incident has it's own detailed worksheet. The user will click on 'create new incident' on the Contents page.

This opens a user form. From this form I want to populate the contents worksheet. I then also want it to populate the relevant incident worksheet. I can populate the contents page but I need help getting the correct Incident worksheet populated at the same time. Hopefully all will become clear running the file.

View 5 Replies View Related

Macro To Populate A Form And Save As?

Aug 8, 2012

I have a workbook with a list of names ("Roster"). The names are on sheet 1 in column B (about 200 names). I have another workbook with a participation form ("Form"). There is a field on the form for the name - sheet 1, cell A4.

populate the "Form" with the names from the "Roster". Each person should get their own form. Once the name is populated from the "Roster" it should save the "Form" as their name. Then the next person on the "Roster" should have their name populated on the "Form" in that cell and saved as their name, etc.

View 9 Replies View Related

Using A User Form To Populate Spreadsheet

Jan 20, 2010

Iím looking to use a user form to populate a quotation template, I have been able to link the first part of the form to the sheet as these are static cells but Iím struggling in getting the items details area of the form to work as I need. Below is a brief description what I need.

Item Details area

Move down a line after every time the add button is pressed and clear contents of the text boxes for the next item.

Also I want to make each * denoted item required before you can add a new item

Iíve uploaded a copy of the file if my description isnít too clear

View 9 Replies View Related

Populate Textbox On User Form

Feb 9, 2007

File attached

1) I have a user form that picks data from a spreadsheet - This is for scheduling a course. Works fine

2) I have a second form which should do 2 things:
a) On the bottom half of the form, select people from sheet 'Staff'. Works fine
b) On the top part, I would like to select a course (using combo box) and fromt this select a date for when the course has been scheduled (from sheet 'Scheduled Courses'). Courses are run a few times so have multiple entries. With some help, have done this and it works well

The problem is that when I select a date for a course using combobox2, I would like to populate the text box 6 & 7 with the cost of the course and the location. This goes wrong as it starts taking cost and location from the first cell. Eg when i select SPIN Selling, all is fine as this are the first courses. However If I take 7 Habits, it gives me costs for SPIN. If I take OM, it still gives me costs for SPIN. The dates in combo box 2 appear fine

View 4 Replies View Related

Populate Form After Selection Of Row In Textbox

Jan 2, 2008

What I've done so far is... Created two buttons (Add and Find) in my Excel sheet1. If I click my Add button Form1 opens. In Form1 the user enters a number of values that are inserted into sheet2 of my Excel book. If I click my Find button Form2 is displayed. This form contains a multicolumn textbox that shows some of the columns from sheet2 that have values in them. Now to my BIG problem....

I would like to be able to select a row in my multicolumn textbox, click my OK button there and then Form1 should be displayed with ALL the values from that particular row from sheet2. As I mentioned I'm very new at this and I'm not even sure how to do this logically and much less the correct code for it. I hope that someone could thoroughly explain to me what I have to do and why to be able to get this working.

Private Sub UserForm1_Initialize()
Dim rIds As Range
Dim MaxId As Long
Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp))
MaxId = Application.WorksheetFunction.Max(rIds)
With Me
.IdBox.Value = MaxId
Private Sub DateBox_Change()
DateBox = Format( Date, "yy/mm/dd")
End Sub.....................................

View 2 Replies View Related

VBA Find First Populated Column In A Row, Starting At Column X

Jan 29, 2010

How would I write something that finds the first populated column in a row, starting at column C and moving to the right?

View 9 Replies View Related

Populate User Form From ListBox Selection

Oct 21, 2009

Using the Roy Cox Database code http://www.excel-it.com/vba_examples.htm , I am trying to populate a user form when the user selects a list row. I don't know if this is important, but I have extended my list beyond 10 columns. The list appears in UserForm2, and it should populate UserForm1. UserForm1 is also available to fill in from scratch; the info pulled from UserForm2 is from a search.

Here is my problem:

UserForm1 does not populate with the current selection, but rather the previous selection. It will appear blank upon the first selection. If I close UserForm2 after getting a blank on Form1 and call UserForm1 from its own macro, I will also see that previous selection.

View 2 Replies View Related

Active Cell Won't Populate Textbox On Form

Nov 11, 2011

why the text box "txtjobnum" wont populate with the active cell in my "COMPLAINTS" sheet. The green code below is in the userform and the red text below that is in module 3.

Private Sub cancel_Click()
Unload Me
End Sub

[Code]....

View 2 Replies View Related

Userbox - Auto Populate Textbox On Same Form

Jan 14, 2012

I have this code inside a userbox to auto populate a textbox on the same form, the combibox info is located on row E, and it populates the textbox with info off row G, but how can I change this to pull the info off row C instead of G???

Code:
Private Sub ComboBox1_Change()
var1 = WorksheetFunction.VLookup(ComboBox1.Value, Worksheets("Basic").Range("E11:G90"), 3, False)

TextBox1 = var1
End Sub

View 3 Replies View Related

How To Design A Form And Populate Data Into Combobox

Mar 20, 2012

How to design a form in Excel and populate data into the combobox, using existing sheet name?

View 3 Replies View Related

Populate Form Listbox Rowsource With Code

Sep 20, 2006

I have a ComboBox(mnthComboBox) on a userform. I would like to populate the RowSource using VBA Code. I have searched this forum but have been unable to find what I need.

View 4 Replies View Related

How To Get Data Entered In Form To Auto Populate Into Calendar

Jun 26, 2014

I am trying to build a Calendar that pulls all of it's entries from data submitted via user form. To be more clear, I built a basic user form in VBA where I can submit this data: name, brief description, Time/duration, and date. Instead of the data I enter into the form populating in specific cells in my Excel workbook, I would like for the information to be populated into a calendar based on the date.

View 1 Replies View Related

User Form - Select From Combo Box And List Box Should Populate

Jan 18, 2007

I've created a user form (click button on 'main page' to display). Combo Box called 'Last name' gets populated with all second names from the sheet 'Staff'

When a user selects a second name from the drop down list, I would like excel to automatically update the list box 'First Name'. Also, If a user changes the first name or Last Name, this should be saved

View 9 Replies View Related

Copy Range Starting From Last Used Cell In Column

Nov 10, 2009

I have a macro that is copying information from one spreadsheet into columns "A through E" on the next available row in a seperate spreadsheet. Beginning with column "G through L" I need to copy the formulas from the row above in the same spreadsheet. Is there a way to do that since the row being copied from will change each time?

View 4 Replies View Related

Repeat The Following Rows And Formula With Column A Starting At 9150

Oct 28, 2008

I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.

View 4 Replies View Related

INDEX Or MATCH: List In Row 1, Starting With Column A, Which Colors Have A Value Next To Them

Oct 20, 2009

Let's say I have a list in worksheet 1. It's in column A, starts in row 1 and goes.

Red
Orange
Yellow
Green
Blue
Purple

In worksheet 2 I want to list in row 1, starting with column A, which colors have a value next to them. I want the list to match the first worksheet's order. I'm looking for a formula solution.

Example 1
WS 1
Red 3
Orange 4
Yellow 5
Green
Blue 1
Purple..........

View 4 Replies View Related

Extracting A Column From Form 1 And Placing It In Form 2

Jul 23, 2009

I have 2 different forms that I need info from one, added to the other.

The reason for this is to update pricing from a new file, into an older file with the same product code for each product.

on form 1(the one I want to keep), column x is price(that I want to update from form 2 column L), and column B is the product code(sku)

Now on form 2 Column L is the The customer price(this is the data I need moved over to column X on form 1. and column I is the UPC 10(sku) that needs to match the same sku(product code) on form 1.

Gee this sounds confusing aFTER i TYPED IT.. i HOPE THIS MAKES SENSE. i WILL ALSO ADD THE 2 FILES, SO YOU CAN SEE WEHAT I am talking about.

Please help as I have about 30,000 items total, and would take way too long to update prices manually every 2 - 3 months.

View 9 Replies View Related

Select And Copy Set Of Data In Column Based On Starting And Ending Values

Aug 26, 2013

I have a macro that copies three sections of data from a word document and pastes it within the Excel worksheet. The column of data is pasted in a single column (data to be space-delimited and evaluated later), and what I would like the MACRO to do is separate the three sections of data based on the starting and ending values of the section and place them in different columns.

Section 1 : starts with the word "Team"
Section 1 : ends with the word "City"

Section 2 : starts with the word "Location"
Section 2 : ends with the word " Date"

Section 3 : starts with the word "Member"
Section 3: ends with the word "Age"

So section 1 would be pasted into cell C1, section 2 pasted into G1 and section 3 pasted into J1.

Each section will have vary in number of rows between the starting/ending values, so to cut and paste the section based on the starting and ending value is vital.

View 7 Replies View Related

Excel 2010 :: Sort Growing Column Starting Under Header Row At Cell C5

May 7, 2014

find macros to sort fixed ranges but not an entire column with existing header rows from 1 to 4.

Added to that is the need to keep the code compatible with Excel 2003 even though I have Excel 2010 at office (it's a file that needs to be "openable" in both versions so the vb code needs to be in XL 03.

Column currently starts at C5 but goes down to C47, at this point. But it's a growing list. Some of the rows are blank at the bottom, too.

View 2 Replies View Related

Column() Function: Return The "letter Form" Of The Column Position Rather Than The "number Form"

Oct 12, 2008

I am using the Column() Function for referencing purposes... what I want this function to do is return the "letter form" of the column position rather than the "number Form"... is there anyway to change this without switching to R1C1 form?

i.e. Column(B4) yields "2"

I want it to give me "B"

View 2 Replies View Related

Configuring Dates: Enter A Date In One Column, Another Column Will Automatically Populate With The 1st Of The Next Month

May 8, 2009

how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:

If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008

Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved