Produce List Of Row Data Based On User Selected Cell Criteria?

Apr 7, 2014

I have a workbook that has three worksheets. The ASU Database sheet contains part numbers and descriptions including specific details that are selected from pull down data validation lists that are named on the third worksheet. I want to have a front end on the first worksheet that has similar data validation lists for the user to select from to create a search criteria that will create a worksheet with only the rows that meet this criteria. I am not sure what method to use to accomplish this.

View 2 Replies


ADVERTISEMENT

Programme To Automatically Select A Value From A List Or Range Once A User Has Selected Corresponding Value From A List Within A Combobox

Jan 28, 2007

i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.

View 5 Replies View Related

Automatically Copying Selected Data Based On Criteria

Feb 16, 2007

I am have a spread sheet (sheet 1) with a number of columns and what i am looking to do is see all the people that are participating in a certain stage in the process that is not common, So what i am wanting to do is copy the names and the corresponding number of these people (on sheet1) over to a new worksheet(sheet2) based on a yes or no criteria further on in the spread sheet(sheet1). sheet 2 has additional columns that the workers here would need to fill in.

The criteria is in sheet 1 cells Y2:Y2000
The number is in sheet 1 cells D2:d2000
The names are in sheet 1 cells E2:e2000

If its at all possible i would also like to then make the names of those people on sheet 1 a hyperlink to the additional information

View 4 Replies View Related

When User Enters Data Into One Cell - Selected Text Prints In Another Cell

Jun 20, 2014

I am trying to do is to make it so that users can enter data into my form (I have managed to create the form and am working on trying to figure out how to get the info entered into the form to appear in my worksheet) and then the data will cause the information to, basically, compile sentences that I want to appear in one of three cells at the bottom of the worksheet.

Essentially, at this point in time, the end goal is to make 3 cells that contain text. Eventually, this text will be indexed elsewhere, but that is for the next person to deal with. I am creating a prototype that I want to present as a process improvement.

So, when the user selects 3 in cell D7 I want the text "Customer purchased 3 Widgets at $20 each." to print in cell 82B.
I also want the user to be able to copy and paste some customer records from another program directly into a cell in the form that will just print (unchanged) into one of these boxes, too.

Lastly, I want the user to be able to select checkboxes that will, when selected, print a comment that will print in two of these boxes. For example, if the user selects yes for cell D26 then I want the text "Customer not eligible for free shipping" to appear in both cells C82 and D82.

View 5 Replies View Related

How To Use For Each Instead Of User Selected List

Mar 31, 2014

I currently have a macro that takes a user selected name and date and creates a time sheet for the selected name. This works just fine, however i have to select each individual person and run the macro for each person, how to automate that part of the macro, so it will automatically create the said sheet for all person at once, rather than me doing it manually.

[Code] .....

The 'CurrentMonth' variable is user selected from a list, and will remain that way.

View 4 Replies View Related

Display Data Based On Selected Month From Drop-down List?

May 14, 2014

I want a table to display data based on which month i select from a drop-down list, the data is of course extracted from a different table. For example, in my final table( highlighted in yellow), i want to display the revenues, cost of goods sold..etc of April in this table when i choose April from the drop-down list, the data of the entire year is located in another table that i plan to hide, as we only need to review one month.

View 1 Replies View Related

Drop Down List Which Returns Values Based On What Has Been Selected In The Previous Drop Down List In The Adjacent Cell

Mar 19, 2009

I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.

View 2 Replies View Related

Data Segregation Based On Name Criteria Slide By Slide In Selected Sheet

Sep 19, 2013

I'm looking for the below requirement:

Name
Date
Sales1
Sales2

Daniel
01/18/11
4,907.00
2,038.00

[Code] ..........

Required output....
Name
Date
Sales1
Sales2

Name
Date
Sales1
Sales2

[Code] ......

Need macro code to segregate the data...

View 1 Replies View Related

Display Data In List Based On Criteria

Sep 11, 2006

II have a list of football fixtures (see attached sheet - barclays premiership) each with a different status Win,Loss,Draw,Pending. I want to display the next team with a Pending status in a cell at the top of the list (cell T13/14) so the user knows at a glance what the next fixture is. I also want to display the days remaining to that fixture in the cells below this (cell T15/17).

View 2 Replies View Related

Deleting Selected Data Based On Cell Value?

Oct 23, 2013

I have attached a sample file.

There are two sheets Stock and BrancnID The stock sheet has a very huge date ( approx 30000 ). The Stock Id of all the records are unique. Every day I get the Stock ID numbers only in excel format from different branches. Every day I have to match the ID numbers received and delete its data in the Stock sheet ( to get an idea I have shown this in sheet3 ).

Is there is any code where I copy paste the ID numbers from the varoius excel sheets into my excel file in the BranchID sheet and the data gets deleted. i.e as I paste the data the record gets deleted but not the Stock ID number. Also the next day when I get new ID numbers and I delete the old ID numbers from the BranchID sheet the data should not re-appear in the Stock sheet.

View 4 Replies View Related

Produce A List Of Text, After Selecting From Validate List

Jun 5, 2009

i want to do is, have a list that picks from a color and then beside it, it will show the possible fruit that is that color for example

Red
apple
cherry
strawberry

OR

Green
watermelon
grapes

The number of fruit will differ by the color so i know i need a counter there, but i am not sure how to list the fruit after i've picked the color

View 6 Replies View Related

VBA Macro To Use Solver On User Selected Column Of Data?

Jul 24, 2014

I am trying to write this macro so that I can optimize 181 outputs based on 2 inputs (columns A and B are inputs). Each row has a single output at the end of the row that I am trying to minimize. I want to be able to select as many of the rows that I want and have the code optimize each individual row. So far I can't get it to let me use variable cell references for the "ByChange:="$A$3,$B$3"." This is the hang up that is not letting me increment the macro to the next row. The macro works currently for the single selected cell, but until I can vary the ByChange portion, I can't automate it.

View 1 Replies View Related

Filter A List By The Criteria Selected In A Listbox, And Activated By A Command Button

Dec 14, 2009

I'm trying to Filter a list by the criteria selected in a listbox, and activated by a command button. My problem is the sort criteria. I have 11 regions, numbered 01EPS through 11EPS. Sorting by any of these criteria works just fine.

The problem is that I also want to be able to sort by ALL of the regions at once. I can do this by using a custom filter. I recorded a macro to see what the difference was, and it simply a matter of changing 01EPS to "=*EPS". However, adding that to my case list results in an error message of "Compile Error: Syntax Error".

View 2 Replies View Related

Chart Twelve Months Of Data For Item The User Has Selected

Oct 24, 2011

how can I provide a chart that display as a line chart twelve months of data for the item selected starting or ending on the data that I have selected

View 4 Replies View Related

Data Validation - Control What User Enters Into Single Cell Based On Others

Nov 29, 2013

I want to control what a user enters into a single cell based on others.E.g.

A B
1 20 500
2 50 500
3 75 500
4 100 300

Column A is a thickness and column b is a width what I want to happen if the user enters a thickness in cell D1 and a width in cell D2 I want an error to pop up if for instance the user enters 100 as a thickness to only allow a maximum of 300 in the width. likewise if the user enters a thickness less than 100 in cell D1 to allow him to enter up to 500.

View 4 Replies View Related

Named List: Data Validation To Restrict The User To Only Selecting Values In A List

Jun 15, 2007

I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.

Insert > Name > Create
Name: Fruit

Refers to:
banana,apple,orange

When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.

View 4 Replies View Related

Populate List Based On Two Selected Conditions

Apr 6, 2009

I have a worksheet which contains all the details of the medical equipment in the county that i'm responsible for.

This worksheet posesses amongst others; two columns titled location and sublocation.

I need a technique which will allow me to select a location from a dropdown list, select a sublocation again from a list and for these two conditions to then populate a list containing data such as asset code and description of all the items in the location and sublocation (possibly a little like an advanced filter, but only for the selected conditions)

This list will then be used to provide an engineers report on equipment holdings at various locations. I'm open to any ideas fellas.

View 7 Replies View Related

Copy Row Based On Dropdown List Selected?

Jun 10, 2014

I am trying to copy/extract row of data from worksheet(Detail)A:W to worksheet(1st Letter) if X=1st Letter on worksheet(Detail). I have never used VBA and i am not sure if this can be done with a formula.

View 2 Replies View Related

Catching Start And End Date Based On User Defined Criteria?

Dec 27, 2013

i am trying to project future date by adding certain number of days, the problem is that i m trying to catch starting date(C2) based on user defined(B2) date criteria is

a. if B2 is normal working day then C2 is the next day i.e. B2 + 1 for example if user enters 1 jan 14(B2) then C2 should be 2 Jan 14.

b. if B2 is saturday then C2 should be monday i.e. C2 + 2 eg B2 = 4 jan 14 then C2 = 6 jan 14.

now the main problem part

c. if B2 is saturday and monday is holiday then C2 should be date corresponding to Tuesday or if tuesday is also a holiday then C2 should be Wednesday and like wise..

d. same for last day of leave is to be calculated similarly to starting date..

I tried lots of IF combinations but it's not working...

View 6 Replies View Related

Produce Lists From Master List

Oct 24, 2011

I have a set of unique customer names in a column A, say A1 to A200 in my data sheet. These customers have route numbers assigned to them (defined by the client) column B - B1 to B200. The route no.s are 1,2,3,4,5,6,7, & 8. The column lists can be of varying lengths but no more than 500 rows. I want to relate the routes to 8 separate sheets in the workbook. In each sheet I want to extract a column of customers based on the route number. So if the first customer in column A is route '1' (column B) it populates the first entry in sheet 'Route 1' with the customer name as so on for the rest of the sheets.

View 9 Replies View Related

How To Produce List Of Unique Values

Jan 21, 2012

I was trying to produce a list of unique values from a much larger list. I'm using this array function -

{=IFERROR(INDEX(Sheet2!$B$2:$B$100,MATCH(0,COUNTIF($B$1:B1,Sheet2!$B$2:$B$100))), "")}

- which is marvellous and gives me exactly what I want. However my test book only has this dragged down 10 rows and already it takes 20-30 seconds to calculate. The real workbook is likely to stretch to several hundred rows, and to make matters that little more complex where I have Sheet2!$B$2:$B$100 this will relate to a completely separate book on a company network.

Is there any more efficient method of creating this list or will I just have to bear with the calculation speed?

View 4 Replies View Related

Identifying Data To Selected Criteria

Mar 11, 2014

I have small table i would like to create. Now, it can be done manually ( but its be very very time consuming) but im sure of a way using IFs and VLOOKUPs so that the data selection can be done automatically...

so in column 1 i have various valuations from 0 to anything 50mil plus that i need to then separate into 4 different columns based on their size. so column A would have 0 - 250k, column B 251k to 500k, column C 501k to 1million and etc etc...

vals 0-250 251-500 501-1mill

555,000 300,000
150,00 75,000

Please see attached ... testing values 1.xlsx‎

View 2 Replies View Related

Produce A List Of Combinations From A Range Of Numbers?

May 9, 2014

Am looking for an easy way to produce a list of combinations (maximum 6 numbers) from a range of numbers listed in 6 different columns:

Example
Column A contains : 1,2,3
Column B contains : 7,8,11,15
Column C contains : 12,16,18,19
Column D contains : 17,30,31
Column E contains : 30,31,32,33,34
Column F contains : 37,39,40
The rules are:

In each combination of 6 numbers, numbers should always be taken from ALL 6 columns. In each combination, numbers cannot repeat.

show me a formula to arrive the results.

View 3 Replies View Related

Macro To Produce List From Specific Range

Dec 2, 2009

I have a workbook with 2 worksheets, Sheet1 & Sheet2.
Sheet1 has a list of products on it, with a code, pack size and cost.

Sheet2 has got 8 columns in it.

The first column will be A , B , C

The second will be D, E, F

Third will be G, H, I

Going right through to column 8 which will be V, W X

In the second column in each on I will be have a (sell by date) So B, E, H, through to W will have sell by dates in them.

What I am looking for is a macro that will give me a list of short sell by dates when I click the button. So if todays date is 02/12/09 when the button is clicked it will give me a list of all the product that have lets say a month sell by date left, I would like to be able to change the month to anything I want, just in case I want to do a longer check on the sell by date.

When it finds a short date I would like it to check against the code, so in the first column the code will be in A, it will match that code up against the code in Sheet1 and give me a list of the Code, and the Product from sheet1 and the sell by date thats in Sheet2. The problem I have is when data is put into the second column on sheet2 which is D.E.F, I would want it just to check that column and not the A,B,C from column 1.

View 14 Replies View Related

Obtaining List Of Unique Values From List Based On Some Criteria?

May 28, 2014

The function below should return the value in a cell IF the string in the cell two cells to the left of it is "Nemo" Omitting the part highlighted in blue, my function returns a list of unique values...but when it's included, nothing is returned at all. Perhaps, there is an error in the syntax that I'm overlooking?

Function listUnique(rng As Range) As Variant
Dim row As Range
Dim elements() As String

[Code]....

View 2 Replies View Related

Update Certain Rows Based On The Choice Selected From A Dropdown List

Jan 11, 2010

Is it possible to update certain rows only based on the choice selected from a dropdown list

I shall explain this scenario

I have attached a small excel sheet called TESTTHEM which i'm testing
and learning excel simultaneously. On the attached sheet

If i select a value in B4 as BusinessLogic, it should then lookup for relevent rows in MISC worksheet and copy C5:L5 from MISC worksheet and replace
the columns G4:P4

Is it possible to do this in excel?

View 13 Replies View Related

Combine Values From Two Columns To Produce Unique Value List

Jun 28, 2013

I have two columns of data and would like to generate a new list showing unique combinations of those values (see attached sheet).

unique list.xls

View 9 Replies View Related

Copying Data From One Cell To Another Based On Criteria

Jun 22, 2014

I am trying to use VBA to move data from one column to another while using values of a third column as a reference for where each value in the first column should be moved to in the second. I will try to explain as best as possible, currently I have a macro that copies from one column to the required but due to the irregular spacing of the data it results in the data not matching with the data its being copied into.

Say I have Three columns A, B and C. I have a range of data in column A say dates that have irregular amounts of spacing between them. Column B is empty. Column C contains Data that is again spaced out irregularly and not in line with that of A. The value of column C cells is just identical values. Now the aim is to move the values from column A in the order which they are listed and place them in Column B next to each value in Column C. So say the repeated value in column c is EXAMPLE then everytime EXAMPLE appears in column C i want to move one date from column A into column B next to this EXAMPLE value, in order which it appears in column A. So the first date will move next to the first EXAMPLE value and the second date which appears next to the second EXAMPLE and so on and so on until it reaches the end of the sheet.

My thinking was placing the A column data in an array and doing some sort of sort.

View 3 Replies View Related

Creating Dropdown List To Customize Worksheet Based On Country Selected

Aug 16, 2013

I have a product list where each row of the worksheet has an image, product details and suggested lists/retails for each local currency.

Some products are not available in certain countries and each market doesn't care to see the other market info. (There are hundreds of items and dozens of countries.)

How can I create a drop down selector so that a user can choose their market, i.e. "Australia," and only the rows and columns relevant to them appear?

Can this be done without macros,? This sheet is distributed among 100+ people and needs to work for lowest common denominator.

View 3 Replies View Related

Excel 2003 :: Limiting Dropdown List Based On User Selection

Jun 27, 2014

I would like to be able to limit a drop down list's contents based on a user's selection in a different drop down. I am using Excel 2003, and I know how to do this in Access, but I can't figure it out in Excel. Basically, I have a list of themes in one drop down. The user picks a theme, and goes to a second drop down which is a list of sub-themes attributable to that one theme and no other theme.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved