I starting to develop a macro for grouping specific information together. part of it I need to group data based on date ranges. My plan was to, in one sheet label the start and end ranges by month (not every range starts and stops at the beginning and end of the month)
For July I would have 7/1/2012 in one cell and in another 7/28/2012
For august I would have 7/29/2012 next to it 8/25/2012, etc
I need to take those ranges and in my FY2013 sheet column I where all of my dates are listed, in the next column J if the date says 7/1/2012 to label it July, if date says 7/30/2012 to label it August, etc.
Conditional formatting. I want to change the color of a group of cells based on data in another group of cells. Example:
If cells G8 and G9 (which are merged) are between 80% and 94%, then I9,I10,I11 (which are merged) will turn Yellow. Also, under the same scenario, IF G8 and G9 is greater than 94%, then cells I9, I10, I11 will turn Red.
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
Sum based on date ranges. I am creating one logical formula.
I have an excel sheet with two columns.
A1: Date B1: Time Spent
Date Time spent (in Minutes) Total
As per above figure I want to sum based on the same dates. I.e A2 has date 1/26/2012 for which first entry is 12 so total will say 12 in C1, for the same date second entry is 14 so 12+14=26 is there in total at C2, for the third and last entry of 1/26/2012 it's 16 so total would be 12+14+16 = 42 in C3 which is grand total for 1/26/2012. I want to fill entire C column with some logical formula so that the logic holds true for various dates.
I have tried to use the IF formula like =IF(A1=A2,SUM(B1:B2)) but it fails at third cell. I have tried several ways to do this but no luck so far ....
I have several groups of data in the same sheet. Each group has two blank rows above the first row of data. Each group has column "B" in common (e.g., "Phone" in the example attached). I'd like to add a title/label of "Phone" to the first column in the row immediately preceding the first row of data for that group.
I have a spreadsheet with a content in cells. Some of the cells are indented left and some aren't. I would like a macro that groups all of the cells that are indented left above the cells that are not indented.
A/B/C/D/E/F/G/H/I/J/K April 2008 / August 2008/Jan/Feb/Mar/Apr/May/Jun/Jul/Aug/Sept/Oct....
How can I get excel to fill in a constant number say '3' automatically based on the date range in column A and B. For example, in this case Since the date range is from April to August how can I get excel to automatically fill in 3 for apr/may/jun/jul/aug
summing monthly values based on different date ranges. For example if I have multiple contracts with different start and end dates and based on those date ranges, I want to sum the respective monthly production totals, how would I do that in a formula. I started to set up the table to include "start date month" and "# of months in contract". Is there a way to sum based on the start month and # of months in contract.
For example if hte contract started in Jan08 and ends in May08, the calculation would start with month "1" and sum over 4 months.
I need to create a vba macro which will sort data according to a code it is denominated by and then will apply specific values from a code key to the data. I really need to have some help with this as although my vba is getting a bit better this is definately beyond me.
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
I have created a spreadsheet which creates an average of feedback for trainers in a training company. The form adds up the feedback score into column L of the summary sheet and I have created a summary sheet which I want you use to calculate the average for each trainer.
I have cobbled together an array formula which creates the overallaverage for each trainer based on the named ranges entered via the form.
I am trying to have the calendar in the second tab of the attached excel file to auto populate based on info in the first tab.
In the first tab, there is the start and end dates of certain projects. The calendar will need to only show the project name of every project being worked on that specific day.
Some days will have more than one project being worked on, the Calendar will just need to list them all under that day. The Start and End dates count as days the project being worked on as well. We will also need the calendar to auto update whenever we modify the dates in the first tab or add/remove projects (rows).
I am building a sheet to display deadlines (rows) by project (columns). I would like to have it automatically hide the rows and columns based on the date of the deadline. If the deadline is today or 1 week from today the associated rows and columns should be visible, otherwise, I would like to hide them.
My table is A1:N9, with A1 being a blank, row names A2:A9, and column names B1:N1.
Every month we have to reconcile our checks and then enter them into our application. We have an option in our application that we can do Check Number ranges. We are trying to find an away to have excel to put the checks in ranges either by a formula, a micro or a pivot tables. We have over 700 checks each month to reconcile.
I am currently working on a workbook to have employees fill in data on what tasks they compelted for the day, and how long it took. There are 5 colums (for this purpose) Task, Description, Time, Required to complete, Completed. The tasks are predefined and listed out in each row. There is also a space for employees to select the date they are entering the data for.
I would like to have a macro that is linked to a submit button and when pressed populates this data into a database on another sheet. This database is split into two sheets (1 with time and one with tasks required/compelted). Each sheet has the list of tasks going down a cloum on the left, and dates along a row on the top. When the employee presses submit I would like this data to popuplate in the coresponding date and task fields and then reset the form on sheet 1 to all 0's.
I've attached a spreadsheet that I'm working on. I want to be able to extract data from a master sheet and copy data to another sheet if the date is within a defined date-range. I've prototyped the problem within the attachment.
Given the code in macro2, none of the records are selected (the "yep"). What am I doing wrong?
I'm building a macro thats copying 4 rows of data at a time from a spreadsheet (has 1500 rows of data total) and transposing it to a master spread sheet. There are blank rows in between each entry (the data source I'm using isn't clean), so how can I either have the macro jump to the first row it finds with a value, copy rows until it stops finding a value, paste+transpose into a new document and then repeat the process throughout the document.
If thats too complicated, a macro that finds rows based on a formula would work as well. E.g. Start at row 5, copy+paste+transpose 5-8, start at row 11 (5+6), copy + paste+transpose 11-14, start at row 17 (x+6) ...etc... Here's the code I have developed thus far:
I need a macro that can set up some named ranges using the text in the header row and the sheet name. The header row will always be in row one, but the number of columns will be dynamic. The amount of rows in the range will need to be dynamic also. To clarify, every used cell stating in row 2 in a column will be the named range with the sheetname+text in row one of the column the actual name.
What formula do I use to populate certain cells (E5:E10 and J5:10) based on match with condition (E3) with cells from and in the ranges C2:C73 and D2:D73 without creating milelong IF formulas? I am almost at the goal... past 10pm here in Thailand and still at the office
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have a requirement where I need to summarize multiple work sheets. And each work sheet as different range. Column names are same in each sheet but number of rows in each are different. Like consider there are 3 sheets with employee details. Each sheet has Employee Name, Employee Number, Employee Location. But in first sheet as 10 employees and second sheet has 20 employees and third as 25. So the requirement is I need to summarize all employees.