(the html is messing up the out put for a2 and a3)
I am trying to get the total amout that is in the set in individual cells. I have the size type done just having trouble timesing the numbers in the cell
Example.
A1 A2 A3
10/2LB/CASE 20 Pound
12 16 OZ CASE 192 OZ
12/750ML/CASE 9000 ML
5 Gal/Box 5 Gallon
(i have placed the columns to match formatting normal=A1 Bold=A2 Underline=A3)
I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
I have a file that samples performance on a cpu. The output shows the sampling date and time in column A. This column changes depending on how long I run the file. No matter how long the column, I only want to pull out the sample date and time 20 times. So if I had data in column A with 300 rows, I want to divide 300 by 20 and pull those 20 numbers and put them in column B in chronological order. Same thing if I had 4000 rows in column A, I only want 20 samples.
View 5 Replies View RelatedData extract from sheet to sheet through column header values, i have set of data on sheet1,2..loop end of sheet
i want pull column data from multiple sheet column values into masterdata sheet depends upon column header values assigned in masterdata sheet.. my code works fine! but i want pull data if column header repeats more than one also
SO_NBR this is one heading in multiple sheets i cant pull col values not more than once under if SO_NBR repeats more than once.
[Code] .....
Find the attachment mentioned as expected result sheets is my requirement : HEADER_UPDATES_AIO_$.xls
DONNAS [Single cell, 1st row] 09/08/2003 15:34 [Single cell ( date and time combined) 2nd row]. Do you know of any way that I can move the name, date and time from the above cells to three separate columns on the same row?
View 4 Replies View RelatedI have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:
id
event_name
C83-858
sample_1_arm_1
[Code].....
I am trying to come up with a macro that selects values from one sheet and inserts them into another sheet. The number of values will change each time based on the user's entry, as well as the number of times that each entry should be pasted.
For example:
Entry: X | Y | Z
Number of Times to be Inserted to New Sheet 3 | 2 | 1
Result:
X X X Y Y Z
I have spent a while trying to figure it out, however the best I can come up with is using an array, but I can only get one value from the array to paste multiple times:
(*Note: In my testing, I didn't insert into new sheet or set up the array to handle different values, I was just trying to get the basic idea to work)
Dim A(1, 3) As Variant
A(1, 1) = Range("C3").Value
A(1, 2) = Range("D3").Value
A(1, 3) = Range("E3").Value
[Code].....
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
View 9 Replies View RelatedI have time start and time end and the difference between the two times. In a third column I have profit and want to calculate the profit per hour. When I divide the profit with the time spent I get a very very high number. If I for instance type in 1 hour of work and profit 100, then I get profit per hour 2400. (profit/hours spent)
On a side note I am trying to get the numbers as 24 hours and not use am or pm and in the spread sheet I get these numbers but in the box at the top where you see the formulas etc. it shows as am and pm. I have uploaded an example.
I have a spreadsheet that has item names and then at the end the manufacturer number. I'd want to find way cut that manufacturer number off the end and move it to its own column.
I pasted some examples below of what it looks like. It is just coincidence that the items below all that the same length...they are all of varying lengths. The one thing they all have in common is that it the last thing in the cell and seperated by a space. I would think there would be a way to find the last space in the cell and cut everything to the right of that. I can do it in a macro if necessary, but where to start.
AVENGERS FIGURE ASST 3 75 A1816
AVENGERS HULK HANDS A1827
AVENGERS SLAMMERS A1822
BATMAN BATMOBILE Y1258
BATMAN DK KNIGHT FIGURE ASST Y7572
BATMAN FIG N VEHICLE ASST Y1252
I have two formula i use to pull out the number from text in a cell (J2), the problem i am having is that it will only pull out numbers up to 99,999 and i now have numbers over a million in some case that i need to report on.
I have two way I have been doing this see below, how can i change them so they will pull the number over a million?
I am sure it easy but i have tried all sort and i can not get it to work...
=LOOKUP(100000,--MID(J2,MIN(FIND({0,1,2,3,4,5,6,7,8,9},J2&"0123456789")),ROW(INDIRECT("1:10"))))
OR
=LOOKUP(99^99,--("0"&MID(J2,MIN(SEARCH({0,1,2,3,4,5,6,7,8,9},J2&"0123456789")),ROW($1:$10000))))
I have WorkbookA that pull numbers from WorkbookB. In Cell D2 of WorkbookA is the name of WorkbookB. The data to be pulled from WorkbookB is in Cells H364 through S364, H being data for January and S being data for December. In January, the data from Cell H364 is pulled into WorkbookA. In February, the data from Cell I364 is pulled into WorkbookA, and so on.
The formula can be written such that, based on WorkbookA indicating in Cell B14 the current month, each month pulls the correct month's data from these cells in WorkbookB.
I am trying to pull a value (text) from another spreadsheet corresponding with a number. I can't use vlookup because none of them are in a left column. HEre's an example:
there are 2 columns with names and percentages. I am trying to pull a name that corresponds to a certain percentage.
I'm trying to pull a specific 10 digit number from a text string. The ID # is always 10 digits however sometimes there are dates in the data that need to be excluded as well as other numbers such as "I-9". The 10 digit number will always start with 1 or 8. Is there a macro or Formula to extract this data? Please find the example dataset below.
Edit: I should specify I want the "100118416" number from the first cell example or the "800011320" number from the 10th example.
NDM Abxx, Kexxxxx 100118416 2-29-12.pdf
VPG I9 Aberxxxxx, Dexxx 100113048 1-1-12.pdf
I-9 Abxxx, Rexx 100119966 4-5-12.pdf
NDM I9 Achxxxn, Paxx 100119008 3-15-2012.pdf
VPG I-9 Acxxxxx, Toxx 100112782 01-01-12.pdf
[code].....
In a1 i have 100.888 and a2 122.222 and a3 122.555UK,(and so on) in column b i want just want the number and not the uk, i have tried =left(a1,7) which works until a3 then it give me characters 122.555 and not the number/value 122.55. I need it as a value to use the vlookup, how do i do it?
View 3 Replies View RelatedI have Put 15 Digit Number 234567890123456 in Cell A1. I am trying to get each Digit Seperately into Single Cell from B1 to P1.
View 5 Replies View RelatedI would like one formula to remove "5206" from this string. I tried a combination of right/left formulas together, but I could not get it to work.
5032.5206.05816.00040501.0000
Attached is the sample file.
Basically I have a number in column A, just wondering is that any faster to allocate the number into individual cell as shown in the attached file.
I have 2 worksheets (Sheet1 and Sheet2). Sheet 1 contains around 3000 records with multiple fields (columns). Column A contains the ID number. Sheet 2 contains some records with different fields except for the ID number which is common.
I need a macro to retrieve information from sheet1 and copy it to sheet 2 based on the ID Number; i.e the macro needs to get the ID number from sheet2, locate it in sheet1 and copy the data from column D in sheet1 for that particular record and paste it in sheet2.
I am having an issue with formatting a cell to 'general'. I have a macro that runs using a formula (i.e. =MID(A12, 18,5)) to extract certain characters from an external data source. I then use only the values of that formula. There then is another macro that compares that value to another value in another worksheet. The issue I am having is when the macro runs, the code is read as ActiveCell.Offset(0, 3).Value...but instead of returning the value in 'general' format, it returns it with what appears to be text (i.e. "75.50" instead of 75.5). This acts as a mismatch since the quotes appear.
I have attempted several things to correct, but even if I try to format-->general it maintains the quotes. The only way it changes is if I click within the cell...then it turns to general (i.e."75.00" becomes 75.5). I am not sure what is the issue.
I am trying to create a formula to pull the person's name and the avg number of cartons sorted for the month from this spreadsheet.
I've attached a sample of the spreadsheet I created, you will see at the bottom I would like to see the person that had the highest avg for the month and the person with the lowest avg for the month.
This is just a simple spreadsheet to track productivity of my sortation employees.
I am trying to do season stats for my roller derby league. I have a great spreadsheet going but the one thing I want to do, I can't seem to do. I am attaching a "test" file. very simple and small but shows what I need to do.
I have different sections and I am trying to pull the highest number out of that section. For this example, it is under the green Jams Skated: Jams at Jammer. The number on the right is the highest number of jams skated while the number on the left should be the name of the skater who has this number. Okay, no problems there. My problem occurs when I try to move these same formulas to another sheet. in this case, sheet 2. It pulls all kinds of strange things.
Formula to pull the lowest number that falls in Cells I2:L2 and the number must be 0 or Greater. Some of the numbers might be negatives and I am trying not to pull those numbers.
View 3 Replies View RelatedI need to pull a reference number and assign it to all records in a particular section. The code I recorded keeps going back to the first section. Also would like it to repeat until all records have the reference number attached.
06010-100Beginning Balance07/09/2004AD06011-10007/23/2004AD06011-10008/06/2004AD06011-100
06011-100Beginning Balance07/09/2004AD07/23/2004AD08/06/2004AD
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 10/14/2008 by acantu
'
'
Selection.Copy
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Range("C7").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("B7").Select
Selection.End(xlDown).Select
Range("C63").Select
Range(Selection, Selection.End(xlUp)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.End(xlToLeft).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
End Sub
What formula or function truncates a text field that is in the following consistent format:
number. name
ie. 3. Super Bella
and 150. Taoist
I wish to truncate the field so I have just the integer without the dot, space or word(s).
Tried Len, Left & Replace but they require a specific number of characters. Since the number can be 1 to 3 digits long, this doesn't work.
I want a cell to tell me how many times the number 12 is in a group of cells. Is there a formula or something that will.
View 4 Replies View RelatedI'm trying to modify this line:
Range("A2").AutoFill Destination:=Range("A2:A10"), Type:=xlFillSeries
I trying to copy down a formula a set number of times based on a cell value or a declared value.
Attempting to do a countif as follows
Count the number of times that F2:F65536=Q1 where E2:E65536 also = N2.
So for a given row, the cell in col F needs to equal Q1 and the cell in col E needs to equal N2 for it to count.
Id like to run a Sub Macro a certain number of times, dependant on the amount of data provided. It could be that I need to run it say 290 times today, but 500 tomorrow.
Is there a bit of code to say, run the macro '500' times?
At the moment, if I set it to run more than it would need to it debugs and gives a compile error, procedure to large.g