I have 2 lists.
I want to rank scores/ratings in list 2 and rank against all those cells that have the same value.
I will upload an example.
In the example you will see column A and column B.
I need a Rank for all those cells in B for 17:45, 18:15, 18:45 etc.
Ranking values and ranking duplicates the same rank I'm looking to rank a group of numbers that will possibly have duplicate numbers that I want to show as a tie but have no break in the rankings.
Example:
20
18
18
15
12
11
11
9
The ranking I am looking for is:
1
2
2
3
4
5
5
6
I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.
Formula:
[Code] ....
I would like to change the ranking between two rows based on some criteria with macro.
View 6 Replies View RelatedI have a data base of numbers Columns C to K with values from Row 2 to 3766. I want to rank each of these columns by value 1 to 100. However, some of the columns will assign 1 to the highest value and 100 to the lowest. In other columns it will be reverse, 1 is given to the lowest value and 100 to the highest. I can do a rank by percentile but that's not the scoring I'm looking for. Also don't know how to reverse assignment of high or low values. One further note, some of the cells are blank in which case I want to assign a neutral score of 50.
View 2 Replies View RelatedI have a results table that i want to be able to rank into a simple list 1 - 4. However the results are not in cells beside each other.
I tried using a helper column and then the Large function, however cannot get it to work.
I have attached an example sheet, and in column L4 - L7 i would like to put the team names (taken from column B) into the right order from the results shown.
I have to replicate this over a number of different pools in a number of different divisions. This is just one pool.
I'm trying to let the code described down below to select 10 of the highest values and give them a ranking in the next column using the letters A to J.
My query;
The code gives all 10 of the highest values the ranking letter J instead of A to J, so what's going wrong?
Also, is there a way to simplify this code so it will be easier to maintain and run quicker?
I've been trying to figure where I've gone wrong on this one for a couple days. Maybe you guys can assist.
I have a data entry table:
DateAgeGenderPositionSportAthleteBike 5 min (Miles) 1/2 BW Pull Up1/8/200920-26MaleChangerRB_84Brett Nena8351/8/200927-33MaleJackRB_83Sha Pet3381/8/200927-33MaleGasRB_82Mik Malf1551/8/200948-54MaleGasMWR_56Dou New2321/8/200920-26MaleChangerRB_82Cha Avr12401/8/200927-33MaleChangerRB_82Dan Kaid6181/14/200927-33MaleChangerMWR_00Ryan Lang7121/14/200927-33MaleJackRB_83Sha Pet6331/14/200920-26MaleCarrierMWR_00Don Mar9152/8/201020-26MaleChangerRB_84Brett Nena8121/12/201041-47MaleCatchMWR_00Jeff Sea715
I have an area for each exercise where I am ranking the athletes average score. In these ranking areas I did not want the athlete name to show up more than once so I decided to use this formula in the names column below:
{=IF(ROWS(L$2:L2)
I have successfully been able to rank items using two criteria but I'm unsure of the syntax for adding a third or fourth set. I'm new to the use of Sumprodoct.
I have attached a file. Where column C and E have the same value, I want Excel to look at column F and assign a rank (formula is in column K) in ascending order.
ACEFK
ItemLife LeftTot CostBalRank
signs1 250 250 1
paint curb1 500 500 2
tree work1 2,500 2,500 3
landscape2 9,000 7,200 4
siding2 9,000 7,500 4
Here is my formula:
=IF(ISERROR(RANK(C8,C$5:C$105,1)+ SUMPRODUCT(--(C8=C$5:C$105),--(E8>E$5:E$105))),0,RANK(C8,C$5:C$105,1)+SUMPRODUCT(--(C8=C$5:C$105),--(E8>E$5:E$105)))
I've attached a file.
I'm making an excel file where I keep track of the scoring in a little competition me and my friends do with betting on sports.
However, I got a little problem trying to automate my ranking.
Naamloos.jpg
As you can see in the image, when there is a duplicate score, the name stays the same for every other same value (Joris). The formula I use (also as seen in the image) just takes the first name it comes across (from left to right) and keeps using that one. But I need it to ignore the name Joris the second time, and ignore Joris AND Tim the third time, so that every score/rank (even if the scores are a draw) has a unique name attached to it.
I am facing some problem with ranking formulae. Attached is a file illustrating them.
Problem 1: Ranking without zero I have a set of data for products. They have a number next to it. Some of the products have a ZERO value next to them. I want to rank the data in an ascending order while ignoring the products with ZERO value next to them.
Problem 2: Ranking on multiple factors I have a set of data for 50 products. There are 5 factors based on which I want to pick the best and the worst. Each factor has a value which can be a negative number, zero or positive number.
This is what I am doing presently: Ranking the products on each factor in a separate column. Points are assigned based on the ranking, i.e. if the ranking of "product A" on Factor 1 is 32, then it gets 32 points It is assumed that equal importance [weight] is given to each factor, thus average points is calculated based on ranking of each product on each factor. Average points are again ranked in descending order The top & bottom 10 are picked from this ranking.
Number of products and number of factors can be different for each analysis. Presently I am giving equal importance to the rankings for each of the factors, what if I have to give varied importance [weight] to the factors.
Cells B3 and B6 both have lists created through data validation.
If the value in B3 changes (by user selecting from the list), I'd like B6 to automatically change to "Select a take to retrieve" (which is the first choice in the B6 list.)
Likewise, if the value in B6 changes (by user selecting from the list), I'd like B3 to automatically change to "Select a version to take" (which is the first choice in the B3 list.)
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies View RelatedIn column A I have a unique number.
In Columns B,C,D,E F and G I have various data
What I would like is to select a Number from Column A and the Row that contains that number Columns B,C,D,E F and G I want to change these Cell Value to 0
For example
Unique number in Column A is 1052
This appears in Cell A452
The cells Values of B452,C452.D452,E452 Etc to G452 change to 0
I created a multipage spreadsheet to track stocks. Two pages import quotes from Microsoft automatically about every 10 minutes. The main page organizes these stock quotes next to the symbols. Stock price, $ change, then % price change.
For example, for symbol INTC,
PRICE cell is =Quotes!D120.
$ change is =Quotes!J120
% change is =Quotes!I120
Now all of a sudden, during a random refresh, EXCEL IS CHANGING THE VALUES from D120 to AB120. J120 to AG120. I120 to AH120. That was after fixing it earlier today. Earlier today it randomly changed those values to something else. Like A, T, and V substitutes for the proper fields. This is happening to about 10 stocks in a row, but I think I saw it on a couple others earlier. It is as if someone is changing these fields (but they aren't!) The fields on the pages being pulled from are staying the same.
Using Office (Excel) XP on a Windows 7 PRO 64-bit OS.
Change Cell if One of Multiple Values (VBA)
I believe my code if pretty self explanatory:
I have a column of values that I want to convert.
The are all generally along the same lines as the below example:
Values is 500000 I want to change it to 5000.00
does anyone have any idea how I can put in a decimal point to two digits before the end of the value.
I am ranking set of numbers (# of days worked) in a 10 cell column but the numbers of persons I rank differs from day to day.
If I enter "0"(zero) on one of the cell, it ranks the whole ten cells. I have to enter Zero because that is the number of days worked.
How can I enter the value of zero that does not activate the other blank cells?
Here is my formula: =IF(ISNA(RANK(B5,$B$5:$B$14,1)),"",RANK(B5,$B$5:$B$14,1))
I would like to have the cell color changed according to what value is chosen from a drop down menu. I guess you need to make some kind of rule with conditional formatting ...
View 14 Replies View RelatedmyColumnOne = Range("NPN").Column 'this is column B, NPN is a Named Range of B1
myColumnTwo = Range("NPCH").Column 'this is column E, NPCH is a Named Range of E1
using these variables I want to say
When data is entered into any cell in myColumnOne
first check to see if this same data already exists in myColumnOne
if it does then check to see if in the row where the data already exists, if the corresponding cell in myColumnTwo ISBLANK then MsgBox
if the corresponding cell in myColumnTwo is not blank, allow the data to be entered.
Example:
Col B….Col E
ABC…..xxx
XZY….........
Good afternoon Gentlemen, I have a column of data, with a varying number of percentage values that add up to 100%, separated by "NA", i.e.
33%
33%
33%
NA
25%
25%
25%
25%
NA
100%
NA
20%
20%
20%
20%
20%
NA
Now... when I change one of the values I would like the others to even up, i.e. in the last example if I change a 20% to 50% I would like the others to change to 10%... any ideas?
I need some code to use text boxes to change the data in certain cells. Basically I want 3 text boxes to appear one after another. The first box should add text to cell T1, then 2nd to cell T2 and the 3rd will add text to cell T3. All these values should be added at numbers.
View 2 Replies View RelatedI know this can be done, as I have seen it before, but can't seem to figure out how to replicate it.
I have a speadsheet in which I have a drop-down box for a certain column's values. How do I automatically have each independent row's background color change dependant upon the value selected in that row's drop-down cell box (and update color automatically if a different drop-down selection is made later)?
For example:
Row 1: Cell C Drop-Down Value = "Yes"...change row color to GREEN
Row 2: Cell C Drop-Down Value = "No"...change row color to RED
Row 3: Cell C Drop-Down Value = "Maybe"...change row color to YELLOW
I receive real time data ( Last Trade Price ) of soybean commodity futures through DDE in to excel ( cell A1 ). During market hours A1 will keep updating every milliseconds or seconds.
My cell B1 ( =A1 ) will have same value as A1 and will update at the same time.
What I'm looking for - A macro code so Whenever value in B1 is between 9.5000 and 9.5050, I want run a subroutine ( similar to calling a macro ). Since B1 would change dynamically so everytime B1 comes between range 9.5000 and 9.5050 a subroutine is fired.
I'm planning to CALL following subroutine -
Sub BuyBeanst()
Range("N9").Activate
ActiveCell.Value = "Y"
Range("T10").Activate
ActiveCell.Value = "Y"
Range("T11").Activate
ActiveCell.Value = "Y"
End Sub
My question is i want a cell to have the colours:
Green=if within the max min range [as specified by user]
Amber=if the current value is less than the allowable slack level[again specified]
red=if the current value is less than or more than the min or max respectively.
I would like to have a cell (A2) with "H" in it. then have another cell with something like =A2&"2" which would equal H2 and actually reference cell H2?
View 1 Replies View RelatedI am trying to do is to write a code that will change the values of cells B17:B25 to "false" when the user selects "true" from the drop-down box in cell B16.
Here 's my
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "B16" Then
If Target.Value = "TRUE" Then
Range("B17:B25").FormulaR1C1 = "FALSE"
End If
End If
End Sub
This is not working! Nothing happens when I select "TRUE" in cell B16!
I want to change the colour of a cell depending on its value, when compared to another row of data identiified by a value in another cell. To try an clarify:
b3 = 1 b5=4 Because b3 = 1 then compare cell b5 with the row g1 as b3=g1 then depending on its postion set a colour
g1= 1 g2:g5 = 2,3,4,5,6
h2= 2 h2:h5 = 7,8,9,10
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
What I am trying to do is give the rank in column D based on the values in columns B and C. Some of the values in column B will have then same rank, and as such I want to add further criteria on which to rank them. I would first like to rank the values in column B and then rank the values in column C, which should give the rank in column D. For example Dog and Frog have the same value of 400 from the Non UK column. Therefore, rather than having these as both rank 1, I want them to be ranks 1 and 2, so want to add another criteria (UK). As Dog is greater than Frog in the UK (i.e. 10>7), I would like to rank Dog as 1 and Frog as 2. Goat will be ranked as 3 because it had the thrid highest value in the Non UK.
ABCD
1Non UKUKRank
2Cat20055
3Dog400101
4Eel200114
5Frog40072
6Goat30023
