I'm trying to let the code described down below to select 10 of the highest values and give them a ranking in the next column using the letters A to J.
My query;
The code gives all 10 of the highest values the ranking letter J instead of A to J, so what's going wrong?
Also, is there a way to simplify this code so it will be easier to maintain and run quicker?
I am trying to do is rank the value in column G from the highest positive value to the lowest and then the highest or largest negative to the lowest or smallest negative in that order. The way it is arranged/sorted in the attachment is exactly how it should be for this example. However, the ranking formula does not work? What it needs to do is show the value in cell H13 as the 6th ranking and not the 13th?
View 3 Replies View RelatedRanking values and ranking duplicates the same rank I'm looking to rank a group of numbers that will possibly have duplicate numbers that I want to show as a tie but have no break in the rankings.
Example:
20
18
18
15
12
11
11
9
The ranking I am looking for is:
1
2
2
3
4
5
5
6
I have a input selection, when i keyin XYZ, the data under column XYZ should be ranked in ascending order. If i select ABC then it should rank ABC data in ascending order.
XYZ
ABC
Input--->XYZ
XYZABC
15
38
26
42
Rank the column by selectionXYZABC
If the weight selected is between the ranges e.g 1.5kg for England so that it returns the higher value 10.69. At the moment if I put in the vlookup formula it returns the lower value of 9.60.
Weight KGEnglandScotlandWales0.59.109.109.101.09.609.109.702.010.6910.6910.693.012.2812.2812.28
I'm attempting to put together a script which in simple terms finds the 'Highest and Second' highest activity and associated FTE for a given sub group.
To be more specific:
On the "Slide 1" sheet look at the values in column J starting at row 7 until blank;For each value, then search the "All Monthly Direct Activities" sheet in column C for the same value, excluding the 'Subtotal' rows;Where a match is found, compare all the values in column E for that sub group;And Find the highest and second highest figure;
Once these are found copy this figure and associated value in column B and paste onto the "slide 1" sheet.
I'm not particularly well versed in writing VB, but I've been working with the code to see if I can get this work, which I have been unable to do.
I have attached a file which may perhaps provide a greater detail than my description of the problem containing the 'Source' and 'Destination' sheets.
I need to know how I can create a formula which will sum a selection of the highest numbers in a range of data. So for example, if I have a row of 10 cells each containing dfferent numbers, and I want to take the 7 highest values from there and get the sum of these values, how do I go about this?
I've tried using the LARGE command but can only get an individual figure.
I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.
Formula:
[Code] ....
I have a data base of numbers Columns C to K with values from Row 2 to 3766. I want to rank each of these columns by value 1 to 100. However, some of the columns will assign 1 to the highest value and 100 to the lowest. In other columns it will be reverse, 1 is given to the lowest value and 100 to the highest. I can do a rank by percentile but that's not the scoring I'm looking for. Also don't know how to reverse assignment of high or low values. One further note, some of the cells are blank in which case I want to assign a neutral score of 50.
View 2 Replies View RelatedI have a results table that i want to be able to rank into a simple list 1 - 4. However the results are not in cells beside each other.
I tried using a helper column and then the Large function, however cannot get it to work.
I have attached an example sheet, and in column L4 - L7 i would like to put the team names (taken from column B) into the right order from the results shown.
I have to replicate this over a number of different pools in a number of different divisions. This is just one pool.
I have 2 lists.
I want to rank scores/ratings in list 2 and rank against all those cells that have the same value.
I will upload an example.
In the example you will see column A and column B.
I need a Rank for all those cells in B for 17:45, 18:15, 18:45 etc.
I've been trying to figure where I've gone wrong on this one for a couple days. Maybe you guys can assist.
I have a data entry table:
DateAgeGenderPositionSportAthleteBike 5 min (Miles) 1/2 BW Pull Up1/8/200920-26MaleChangerRB_84Brett Nena8351/8/200927-33MaleJackRB_83Sha Pet3381/8/200927-33MaleGasRB_82Mik Malf1551/8/200948-54MaleGasMWR_56Dou New2321/8/200920-26MaleChangerRB_82Cha Avr12401/8/200927-33MaleChangerRB_82Dan Kaid6181/14/200927-33MaleChangerMWR_00Ryan Lang7121/14/200927-33MaleJackRB_83Sha Pet6331/14/200920-26MaleCarrierMWR_00Don Mar9152/8/201020-26MaleChangerRB_84Brett Nena8121/12/201041-47MaleCatchMWR_00Jeff Sea715
I have an area for each exercise where I am ranking the athletes average score. In these ranking areas I did not want the athlete name to show up more than once so I decided to use this formula in the names column below:
{=IF(ROWS(L$2:L2)
I have successfully been able to rank items using two criteria but I'm unsure of the syntax for adding a third or fourth set. I'm new to the use of Sumprodoct.
I have attached a file. Where column C and E have the same value, I want Excel to look at column F and assign a rank (formula is in column K) in ascending order.
ACEFK
ItemLife LeftTot CostBalRank
signs1 250 250 1
paint curb1 500 500 2
tree work1 2,500 2,500 3
landscape2 9,000 7,200 4
siding2 9,000 7,500 4
Here is my formula:
=IF(ISERROR(RANK(C8,C$5:C$105,1)+ SUMPRODUCT(--(C8=C$5:C$105),--(E8>E$5:E$105))),0,RANK(C8,C$5:C$105,1)+SUMPRODUCT(--(C8=C$5:C$105),--(E8>E$5:E$105)))
I've attached a file.
I'm making an excel file where I keep track of the scoring in a little competition me and my friends do with betting on sports.
However, I got a little problem trying to automate my ranking.
Naamloos.jpg
As you can see in the image, when there is a duplicate score, the name stays the same for every other same value (Joris). The formula I use (also as seen in the image) just takes the first name it comes across (from left to right) and keeps using that one. But I need it to ignore the name Joris the second time, and ignore Joris AND Tim the third time, so that every score/rank (even if the scores are a draw) has a unique name attached to it.
I am facing some problem with ranking formulae. Attached is a file illustrating them.
Problem 1: Ranking without zero I have a set of data for products. They have a number next to it. Some of the products have a ZERO value next to them. I want to rank the data in an ascending order while ignoring the products with ZERO value next to them.
Problem 2: Ranking on multiple factors I have a set of data for 50 products. There are 5 factors based on which I want to pick the best and the worst. Each factor has a value which can be a negative number, zero or positive number.
This is what I am doing presently: Ranking the products on each factor in a separate column. Points are assigned based on the ranking, i.e. if the ranking of "product A" on Factor 1 is 32, then it gets 32 points It is assumed that equal importance [weight] is given to each factor, thus average points is calculated based on ranking of each product on each factor. Average points are again ranked in descending order The top & bottom 10 are picked from this ranking.
Number of products and number of factors can be different for each analysis. Presently I am giving equal importance to the rankings for each of the factors, what if I have to give varied importance [weight] to the factors.
I have a column of numbers that I would love it if Excel could pull out the top 3 or 4 highest values from the column.
View 12 Replies View RelatedI'm recording statistics of sport and since I'm dealing with lots of players (and it's easier to add the statistics in when they're sorted by team and name rather than by highest amount of a stat) I need to have a separate section of the spreadsheet to return the 10 best in a stat.
I've found other formulas but I'm not good enough at spreadsheets to be able to manipulate formulas by adding stuff in so it's been hard to get exactly what I want My problem is that I need this to sort by goals (so most goals first) and then by Games played. Here's an example of what data I'm working with:
Ideally I'd like the list to show all these things (so #1 would be Player N), just sorted by goals and then games.
extract the highest top 5 values from one column in a filtered table with hidden cells. How can I do this without using advance filter or a pivot table in excel 2003 that will show only the visible cell values and not the hidden cell values
I have the following 2 formulas that determine the top 2 scores and return the respective headers, but they aren't perfect.
=INDEX(T1:V2,1,MATCH(MAX(T2:V2),T2:V2,0))
The above returns the max, however doesn't take into account scores that are a tie or 0 values
=INDEX(T1:V2,1,MATCH(LARGE(T2:V2,2),T2:V2,0))
The above returns the 2nd highest value, but some instances the output is correct (if there is a tie or a 0).
How can I fix both of these equations and also determine the 3rd highest score?
I have 2 columns, A (has the names of employees) and B (has the month in which the employee has a project scheduled). What I’m looking to do is find the latest month an employee has a project scheduled. Note: Employees can have a multiple number of projects so they may be listed multiple times with corresponding months.
I have each employee listed in column F and am looking to find their latest project month in column G. (I have the number that the formula should return in column H).
what I need for excel to automatically remove the highest and lowest TOTAL POINTS and create an average "Speed Rating" of the remaining 3 scores.
Is it possible to get Excel to do this?
I have a Pivot Table with 10 columns of data (numbers with a value of 0 to 1000) and a Total per row - all okay (1500 or so records).
For each row, I need to add the highest 3 values from the 10 columns to make a new total. Is there an easy formula I can add to the Pivot to do this?
Starting at C6 and running down the C column there is a numerical list of values which have been generated from a PivotTable. I'd like some code that will scan down the C column and copy the highest 10 values in that column and the contents of the cell in the corresponding A column starting at F5 and finishing at F15 (a top ten list).
A sample workbook with desired output is included.
I need a formula that will pull specified information from sheet2 (without having to sort) into sheet 1 by looking up the specified name. See attachd file.
View 3 Replies View RelatedI have thousands of drawings listed in colums and each in the row has revisions P01 to P10 for Proposal and C01 to C10 For Construction. Is there a way of getting the highest revision of all listed in a row without turning them into numbers when P is older than C , but 1 is older than 10? MAX function doesnt count when value consists of both - number and letter.
Manualy selecting the highes revision will cost me weeks... and brain damage.. as I have thousands of drawings and more are coming...
I have data in a worksheet coming from an external device that is updated via DDE. The values in the cell change every few seconds. I would like to record the highest and lowest values that these cells contain.
I want the peak values to be stored in other cells.
How can i make a best XI team from a list of weekly scores in my Fantasy Football league?
Players are as follows:-
One goalkeeper - Top scoring goalkeeper per week
Four defenders - Top four scorers per week
Three midfielders - Top three scorers per week
Three forwards - Top three scorers per week
I need it to find the top scoring players in the above categories and then display them in a specified area.
I also need this to happen for each individual week, NOT cumulative. literally, the highest scoring XI players, as listed above, for the present week.
I need the close% column to auto sort from highest to lowest so that I can see at a glance who the top sales person is. I have conditional formatting for the top three but I would rather them auto sort by close%, can anybody help me with this. I have attached the file,
View 9 Replies View RelatedI have a column that updates automatically by placing a value in in the next blank cell in the column. I am trying to write two formulas to identify the highest and lowest values in the preceding 10 cells of each update in the column but seem to be stuck in MIN/MAX/OFFSET hell.
View 8 Replies View RelatedI have a spreadsheet and on sheet 1 it currently has 45791 rows filled with data and it increases each day.
Each row looks like this
A RACECOURSE
B DATE
C RACE DETAILS
D HORSES NAME
E RATING OF THE HORSE
On Sheet 2 I have 3 columns. These are the list of horses that are running on a particular day.
A DATE
B RACECOURSE
C NAME OF RACEHORSE
What I want to do is to be able to list in columns D,E,and F on sheet 2 the last three ratings the horses achieved from sheet 1.
how to acquire the latest rating of the horse by using the following formula.
=IF(ISNUMBER(v(LOOKUP(9.9999999999999E+307,1/SEARCH(C2,Sheet1!$D$3:$D$45790),Sheet1!$E$3:$E$45790))),v(),"")
This works a treat but for the life of me I can't fathom out how to get the formula to pick the latest three ratings and place them on sheet 2.
I am using excel 2003