I have something that looks like this:
Dim LR As Integer
LR = Range("b65536").End(xlUp).Row
Dim LC As Integer
LC = Range("xfd4").End(xlToLeft).Column
Range("A1:" & LC & LR).Select
What I am trying to do is be able to refence both my row count and column count in the same range but I keep getting an error.
Right now the code below reference AI on sheet BOM. However, I need it to be either referenced by being the last filled row on sheet BOM or by having the word "rounded" on row 4 --what which over column on row 4 that has the word "rounded".
Current code:
Range("J2").Select If Sheets("BOM").Range("C4") = "" Then
ActiveCell.FormulaR1C1 = "=BOM!R[3]C[25]"
Else
ActiveCell.FormulaR1C1 = "=BOM!R[4]C[25]"
End If
I have a row of cells on one "Sheet1." I am trying reference these cells into a column on "Sheet2." I know I can reference one cell at a time, but I have a large number of cells in the row on Sheet1 and I know that there has to be an easier way to do it, I am just not excel-savvy enough to know what it is.
I know you can copy and "paste special" (transpose), I am just wondering how to do that while referencing. I have heard that the "offset" function can be used, but after extensive trial and error, I haven't figured it out.
I want to use the text to column function to break my data into different columns whenever there is a "(". I tried to take column A and reference the entire to columnn AA (for example, cell AA1 would be "=A1". From column AA, I then tried to perform the text to column function, but it would not separate by the "(". It only works when column A is directly copied to column AA. Is there a way to make it so that it can take a cell such as AA1 which is "=A1" and read it so that is the text of A1?
View 9 Replies View Relatedhow to reference a listbox value by column? For example, I have a listbox that is populated by two text boxes. The actual list looks like this:
ItemOne 1
ItemTwo 2
ItemThree 3
And so on. With Column 1 being a string and column 2 always a number.
I'd like to be able to take all of the values from column 1 and paste them into my spreadsheet next to particular adjacent cells.
Also, I'd like to take the values in column 2 and sum them.
I want to create a macro to insert 12 cells left of a column labeled "This Year"
As the spreadsheet grows (by 12 columns @ year) the "This Year" column moves to the right. Thus I need to reference the range off of that column and then insert 12 columns directly to the left of it each year.
I then need to enter the month labels in the new columns row 8.
My problem is trying to reference off the "This Year" column.
I am attempting to create a workbook that will keep an inventory of items in a catalog that I own and want to order (worksheet1). Ultimately an order form would be filled in(on worksheet2). I would like to have the entire row of data copied (from worksheet1)to the next open/empty row on the order form (worksheet2), if any cell in column C (worksheet1) has data.
I have attached the workbook : Catalog Orders.xlsx
I've only done a small amount of macros with VBA.
I want to create a macro to insert 12 cells left of a column labeled "This Year" As the spreadsheet grows (by 12 columns @ year) the "This Year" column moves to the right. Thus I need to reference the range off of that column and then insert 12 columns directly to the left of it each year. Can I somehow reference the label "This Year"?
I then need to enter the month labels in the new columns row 8.
My problem is trying to reference off the "This Year" column.
I'm trying to create a macro that transposes data from columns to rows.
My source data is laid out so Column A and B contain item identifiers, and then the header for Column C to Column S contain dates (March, April, May, etc) and the row data below contains quantities for each month. This is on Sheet1.
I need my end data (on Sheet2) to have the item detail in Column A and B, the quantity in Column C and the Date in Column D. If there is a date that has no quantity then it should be skipped.
Sample Source Data (Pipes added for clarity, they aren't in the actual data)
Part |Description |June 4 |June 11 |June 18
A | PartA | 5 | | 12
(Please note June 11 has no quantity)
Sample Destination Data:
A | Part A | 5 | June 4
A | Part A | 12| June 18
Below is the start of the code, obviously I have a ways to go before it's fully functional but hopefully you get the idea how I'm trying to attempt this. Where I'm having issues right now is referencing columns by number. Is there a way to do this so I can do Column = Column + 1 to advance columns to the right? Or any better way to address this all together?
HTML Code:
Sub ConvertToRows()
Dim ReviewRow, ReviewRowEnd, PasteRow, ColumnNumber As Integer
ReviewRow = 2
[Code]....
I wonder if there is any easy way of findinig (numerical) duplicate entries in a column? Some cells are empty, in case this might cause a problem. I do not wish to delete duplicate rows automatically, just to find them. Why not just sort it? Because indirect referenceing is used where each row corresponds to a separate spreadsheet in the workbook. What I need is to find the duplicate so that I manually can erase one of the spreadsheets for the particular case and adjusting a reference list.
View 3 Replies View RelatedIs there a way to do this without using a macro, but I need it to be in a macro.
Column A has a value I am calling a label, ex. ABCDEF which occurs over and over. Column B has a list of animals, many of which repeat AND will be together if they do repeat. In other words, all rows in Column B with Cows are together, occurring in consecutive rows. I need a macro that will look at each row in column C and increment +1 starting at 0. That will be concatenated with the value in Column A and pasted as a value in column C.
See the linked spreadsheet tabs for Before Macro and how it should look After Macro is run.
[URL] ........
Is there some easy way to fill out column B referencing column A, but only incrementing by 1 row in A every 2 cells in B?
Example:
Column A:
A1 = 1
A2 = 2
A3 = 3
etc...
Column B (I would like to fill this, referencing column A):
B1 = A1
B2 empty
B3 = A2
B4 empty
B5 = A3
etc
I'm trying to use VBA code to delete certain rows based on a couple of criteria as follows:
1) If column header is "TERMINAL NAME" and the cell value in that column is "BONDDESK", I need the entire row deleted.
2) Similiarly, if the column header is "PRODUCT TYPE" and the cell value in that column is "CORP", that entire row needs deleted as well.
The information is coming from another source, so the columns may change from day to day, i.e, "TERMINAL NAME" may be in Column L one day but in Column O another day.....
I have a rolling 12 month (each day in column) tab in Excel 2010 that references variances by ID number in column A, and the column headers are each day for 366 days (2011). I would like to create a tab that shows the past 10 day's variances by ID number. I haven't been able to write a formula that will look at the date headers and the row ID number to return the figure for that day. Here is a sample of the 12 month rolling and the 10 days at a glance that I want to populate.
Rolling 12 Months
IDName12/25/201212/26/201212/27/201212/28/201212/29/2012and so on
1234Employee Name - - - - (11.07)
1235Employee Name - - - 0.20 -
1236Employee Name - - - - -
1237Employee Name - - - - (1.00)
[Code] .........
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedVBA which would count data in Column F of dump Sheet and paste the count in master sheet B2 Cell.
View 7 Replies View RelatedI have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.
View 4 Replies View RelatedFor column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
I am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI have two columns with dates. Colum A has the date of the deadline of a document while column b has the day it was sent. Column X will display the difference if its a positive integer ( i.e. if the document has been sent after the deadline). Now i have another column Y which displays the month as an integer of when the document was actually received.
Now i need a counter which will count the number of instances a positive integer is registered in column X according to the month in column Y. I have been trying everything but cant figure a simple way to do it. Im doing this so i can be able to see how many documents are sent after the deadline per month.
I think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
I have a formula that counts if a date range is present. However I need to change it to count another column only if that date range is present. For example a17 a50000 the user will enter the date of the order. and in column B has the order number. I want the formula to count the order numbers for a data range in column A.
Here is what I have but it is counting the dates in col A not the order numbers in B?
I would need to count unique frequencies in column A, but only for a specified value in column B.
Example:
A|B
1|1
1|1
1|1
2|1
2|1
2|2
2|2
3|2
3|2
I am using Excel 2007 and found this formula that counts all unique frequencies in column A: =SUM(IF(FREQUENCY(A2:A10,A2:A10)>0,1))
In my example, result = 3 Now, I would need to add the possibility to count only for B=1; in my example, result should be = 2.
I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.
So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).
A
B
C
D
E
01/01/2014
[Code].....
I need to populate sheet 1 of the spreadsheet attached.
I have tried several formula's but don't work and am getting desperate!
I need to count Column A of sheet2, when "Adverse SEN" occurs but only when there is an "x" in Column B of sheet 2 appears next to "Adverse SEN".
So basically i need to populate Sheet1 of the spreadsheet with the data is sheet2 of the spreadsheet.
I need a formula to calculate how many time an adverse SEN was - where there is an x - resubmitted, approved at meeting, delegate approval obtained, approval outstanding, rejected or approval not required.
I am using excel 2003, so please don't provide me countif functions.
I have a column that repeats it self and I want to perform a count on Column B, based on the values in Column A.
Example attached : Book2.xlsx
how to count the unique occurrences in column A based on the value in column B. In the example below, I am trying to count the number of unique names in each state (Illinois=1, Colorado=2, New York=2). I would like the formula to count unique occurrences for the entire column A because I will be adding to the list.
..A.............B............C
John......Illinois
John.....Illinois
John.....Colorado
Alex.....Colorado
Alex.....New York
Steve...New York
Steve...New York
I am wanting to count the number of records (excluding cells with no value) based on criteria in a corrosponding column. In column "AS" I have a number of records that are not sorted showing values "7", "13" and "2".
In column "AL" there are values attached to some of these records based on certain IF statement conditions. I am wanting to count and sum the number of records in column "AL" that meet the conditions of "7" in column "AS" and so forth.
How do I count unique values in Column A only if the values in Column B match?
A B
1 a
2 a
1 a
4 b
5 b
1 b
The formula would return "2" for "a", and "3" for b. Basically, there are names in column B, and I want to know how many unique things are in column A for each person. If there is a better way than a formula (pivot table?) that would be great - like a table that has each of the names (from Column B) and the number of unique items from Column A next to each unique name.