I have excel data where it runs like below:
Lumina
006
Ali Rashid Al Amin
61.40
Date
03/04/2013
11/04/2013
14/04/2013
check
20
Raja
I need a result column containing as below but where the numbers are removed those cells has been
Lumina
Ali Rashid Al Amin
Date
check
Raja
I've a cell that contains numbers and texts and I want to sum the numbers and get a result in another cell.
This is an example for my cell:
arando-3,12; hegymeg-4,3; vas-7; aranyoska-1,8
and the result: 16,22
My excel sheet contains inventory of products and quantities, each is in a form of combined number followed by text without a delimeter. For example 2AWS means Two (2) of AWS.
Each cell in my excel database may contain pair of products, each is defined in the above form but the pair of products are separated with a comma.
I need to calculate the total number of each product and split in two different cells.
For example:
Cell A1: 3GFG, 2AWS
Cell A2: 2NG, 1AWS
Cell A3: 1NG, 4GFG
Desired Output
==============
GFG7 (i.e. Cell A5: GFG , Cell B5:7 etc.)
AWS3
NG3
We are changing management systems here and in order to do so we need to provide the names and addresses of over 400 different people. Our current management system stores people's addresses as a whole for example; 32, Example Street, Town, County, Postcode.
I cant extract just the numbers because I only need the house number and not the postcode.
After searching several forums I thought I had solved it with this.
Cell A1 is the extracted address from current management system reading 32, Example Street, Town, County, IU13 8TY
Cell B1 is =LEFT(A1, SEARCH(" ",O15,1))
Cell C1 is =SUM(MID(0&B1,LARGE(ISNUMBER(--MID(B1,ROW(INDIRECT("1:"&LEN(B1))),1))*ROW(INDIRECT("1:"&LEN(B1))),ROW(INDIRECT("1:"&LEN(B1))))+1,1)*10^ROW(INDIRECT("1:"&LEN(B1)))/10)
That only gives me the number "3" though and I need 32.
Basically A1:A400 will be addresses as above and in cell B1:B400 I need just there house number at the start.
I have column A with Different status like Open, closed, available etc. Column B have numbers. i am looking for a formula in condition formatting for column B.
If the cell value in column B is 2 or more, the same cell should be highlighted in Green.
If the cell value in column B is 1, the same cell should be highlighted in Yellow.
If the cell value in column B is 0, the same cell should be highlighted in Amber.
If the cell value in column B is less than 0, the same cell should be highlighted in Red.
If the cell value in column A is "Available", cell in column B should be highlighted in Amber.
My excel database sheet contains inventory of products and quantities, each is defined in the form of combined number followed by text without a delimiter. For example 2AWS means Two (2) of AWS.
Each cell of the inventory field may contain up to two products, each product is identified in the above format; but the pair of products are separated with a comma.
The inventory field is occupying from cell $A$2:$A$5000; and is defined as a named range "INV_QTY" with scope within the entire workbook. I need to calculate the total inventory for each product.
Here's an example:
Cell A2: 3GFG, 1AWS
Cell A3: 2NG, 2AWS
Cell A4: 3AWS
Cell A5: 4QLK, 4GFG
etc.
The desired output should be calculated as follows (assume Input will be on Column C & D)
Product - QTY
GFG - 7 (i.e. Cell C2: GFG , Cell D2:7 etc.)
AWS - 6
NG - 2
QLK - 4
What I have: (Table1) A table with multiple columns. One column consists of cells that can contain different types of information in a non-consistent way. One thing is for sure: if a cell contains data, it will always contain a name of a person. E.g. a cell in that column could contain the following: "838374987343 based on 98989 John 990999", or "000000000john", or "William 39843984 more text and even more text"
(Table2) A separate table that contains the names of people in a column, e.g. "John", "William"
What I want:A formula that searches for the names (mentioned in Table2) in Table1 and copies this name in a new column.
Result:A new column with the copied names as content.
I need to remove only numbers from excel cell - I have tried using the "constant" function but did not work. I have thousands of cells with a consistent 4 digit number like this:
1000 the rest is text
How can I remove only numbers but leave all text in the cell and then if I can trim the cell so there are not any spaces at the beginning afte removing the numbers.
I want to color the cells for some specific texts in RED, and some in BLUE and some in GREEN.
For Eg: I want to color the cells in RED, which contains below specific texts in a sheet.
UNIX
LINUX
MS OFFICE
POWER POINT....like this for nearly 100 specific texts.
and I want to color the cells in BLUE, which contains below texts in a sheet.
JAVA
.NET
SQL
MSDOS....like this for nearly 100 more specific texts.
If i create a rule in conditional formatting for each text,I have to create nearly 400+ rules for my task now, which is not possible.
I have to take a range of phone numbers that I have to port from another carrier and manually type them out or copy into another speadsheet, removing duplicate numbers. For example, I have the following numbers:
55532821055553282108
78132821235553282123
55532821625553282163
The results on the next spreadsheet need to be:
5553282105
5553282106
5553282107
5553282108
7813282123
5553282162
5553282163
I am looking for a way to automate this process.
I need a formula to use on MS Excel 2007 to remove the English letters from a cell A1 and return only the numbers(if any) & Chinese characters to B1.
Please refer to the able below.
Example:
A
B
1
so l首先欢迎大家收听我们的科学与烹饪系列
首先欢迎大家收听我们的科学与烹饪系列
2
讲座的最后一次报告 有点难过这是最后一次了
讲座的最后一次报告 有点难过这是最后一次了
[Code]...
I need to remove the duplicates under column B for each item under column A and I can't seem to figure out how to do it.
I'm using Excel 2007; I would prefer a VBA solution, as I have to do this on a monthly basis. However, if a formula is the best way to go, then that's just fine. Either way, I'm preparing the data for a pivot table. I am unable to post the actual document in the interest of data protection.
Essentially, I'd like to turn this-
_ A B
1 Paris Bill
2 Paris Bill
3 Paris Mike
4 Paris Derek
5 Paris Derek
6 London Mike
7 London Bill
8 London Mike
9 London Bill
10 London Derek
11 Tokyo Derek
12 Tokyo Derek
13 Tokyo Derek
into this-
_ A B
1 Paris Bill
2 Paris Mike
3 Paris Derek
4 London Mike
5 London Bill
6 London Derek
7 Tokyo Derek
In other words, each city should have only one instance of any name that accompanies it; not all names will accompany each city.
I have found a very useful UDF for removing non-alpha characters from strings. (See below, Credit for posting to Stanley D Grom - Ozgrid post Removing Non-alpha Characters From Text).
Option Explicit
Private Function RemoveCharacters(InString As String) As String
Dim intLoopCounter As Integer
Dim intStringLength As Integer
Dim intASCIIVal As Integer
intStringLength = Len(InString)
InString = LCase(InString)
For intLoopCounter = 1 To intStringLength
intASCIIVal = Asc(Mid(InString, intLoopCounter, 1))
If intASCIIVal >= 97 And intASCIIVal <= 122 Then
RemoveCharacters = RemoveCharacters + Mid(InString, intLoopCounter, 1)
End If
Next intLoopCounter
End Function
Two requests:
1. Could the UDF be modified such that any part of a string contained within brackets is also removed (e.g. "NLGA High Street (West-Enfield), EN6" becomes "nlgahighstreeten")?
2. Can an argument be added to the format of the UDF, such that numbers (0 to 9) are either included or excluded (e.g. RemoveCharacters(A1,1) where the argument 1 would include any numbers (0 to 9), so "NLGA2003 High Street (West-Enfield), EN6" becomes "nlga2003highstreeten6")? blankor 0would exclude these numbers, i.e. would return "nlgahighstreeten"
I have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
Formula that can do this?
Sheet1
ABC111213214325436547658769871018112123113421453156416151726183194120522163227423852496257268279
Excel 2007
I basically want column A to be like Column C. The logic is that every time the row that have 1, skip a row and run the numbers until the next 1 appears.
I have a series of numbers in one column. Is there some way I can divide all the numbers together by, say 10, without doing it manually?
eg.
12
15
15
25
20
should become
1.2
1.5
1.5
2.5
2.0
Is there a way in Excel to do that?
I have a column in my data set that consists of dates and times in this format: 2014/08/02 01:46:49 PM. I am trying to convert these dates and times to numbers so that I can actually use these values for calculations and regression analysis. When I click on one of the cells, I get a number that is revealed along with decimals. For example, the cell with 2014/08/02 01:46:49 PM had a stored value of 41853.574. I tried to highlight the entire column of dates + times and click on the format cells button. I selected the number category under number but that did not work. I also tried to use the =DateValue(Cell #) function but that did not allow for distinguishing between the same date but different times.
What are my options for converting these dates and times to numbers that I can work with? Is there a way to get the entire column of dates + times to show each cell's numeric stored value?
In the attached spreadsheet I would like to locate the peak values of the numbers in column "F". I don't know if this is best done with a series of functions or by using a macro.
Column "F" translates to the light blue line on the attached chart. Column "F" (MACD) is the difference between a 12 week exponential moving average (EMA) and a 26 week EMA.
I would like the peak values from column "F" re-stated into column J,K,L or M. Ideally I would like to find the highest peak that occurred in a rolling 12 weak period. So not all peaks would need to be posted. By doing this I would only be identifying longer trends .
I'm using Excel 2007. 25 years experience using Excel and functions. Limited experience with Macros though long ago I used to write C code.
I am using excell 2007 and 2010
I need to find the average numbers on sheet 1 column D. Column D contains numbers as well as Blank cells. The info will be presented on sheet 2 in a monthly view. In other words i need to ssearch awithin a date range and determin the average of those numbers. This works on some months but return a DIV/0 erro most of the time.
=AVERAGEIFS('2N Stats'!$I:$I,'2N Stats'!$E:$E,">=2/1/2011",'2N Stats'!$E:$E,"
I have the following in cells a1,a2,a3 & a4 as follows:
A = 14
B = 15
C = 16
D = 20
Total = 65
I need to sum the total of the above, a,b,c & d and show the total. How do I add only the figures and get the total?
I have a excel file, I need to remove the first two digits if they are certain numbers, such as 12. For example, if the number is 12987654, then I need remove 12, and it will be "987654" , but if it is not 12 in the first two digits, then keep it no change, for example if it is 345678, then keep it.
I barely work with Excel formulas, now I need connect the excel file with my Database table. I need to make the file matches the DB.
there is a none VBA way to remove everything from a cell but the numbers.
Example: A, DAVID (002081) becomes 002081
The cell the formula will go in is F4 and the cell its looking at is K4.
I wrote numbers in column b cells in disordered way :
1
.. 1
1
.... 1
.. 1
1
I would like to make them to be aligned in the left side by a code.
I have a list of numbers in Column A that I always copy into another sheet. The problem I have is that some of these numbers end in "+" and I can't use them when it has that. I have to go through and one by one take out the plus. I was wondering if it was possible to copy only the numerical values to a new column?
Example
Original What Im Looking For
4 4
56 56
8+ 8
5 5
90 90
2 2
4+ 4
45 45
1 1
67 67
Auto Merged Post Until 24 Hrs Passes;Actually I just figured it out. I did a text to columns with a + sign as the separator and it worked.
I have about 10000 cells of varying length in text and numbers but they all end with numbers on the ends of them. Using text to columns doesn't work because they're all different lengths and it cuts them off in the wrong place.
Is there a formula I can use that will return only the text from these cells and remove the numbers. It would definitely save me time from individually deleting the numbers at the end.
I'm trying to clean up a very large list of last names. Only one individual cell, but that cell includes numbers, decimal points, and spaces inbetween the numbers. All I want left in the cell is the last name. I have just under 100,000 to do! How would I go about this? Using Excel 2007.....
View 2 Replies View RelatedI m looking to format a cell to remove numbers that i don't need. For example, at work we can swipe a card and the card number comes up like so.
;11=00=0370904?
is there a way to format the cell to remove everything but the 0370904
I have a list (SIC Codes) and I want to remove the numbers. The numbers range from 2 to 8 deep. The list exists in column B and I want the new list in column C.
01 Agricultural Production Crops
011 Cash Grains
0111 Wheat
0112 Rice
0115 Corn
0116 Soybeans
0119 Cash grains, nec
011901 Pea and bean farms (legumes)
01190101 Bean (dry field and seed) farm
01190102 Cowpea farm
01190103 Lentil farm
01190104 Mustard seed farm
In cell A1 i have the value ABC123.
I want to remove the 123.
Can you tell me how to do this?
I have a spreadsheet with 1000's of 3 digit numbers and each one has a underscore in front of it.
HOw can I remove the underscore from each of these 3 digit numbers without doing a find/replace on each different number?