I've a cell that contains numbers and texts and I want to sum the numbers and get a result in another cell.
This is an example for my cell:
arando-3,12; hegymeg-4,3; vas-7; aranyoska-1,8
and the result: 16,22
My excel sheet contains inventory of products and quantities, each is in a form of combined number followed by text without a delimeter. For example 2AWS means Two (2) of AWS.
Each cell in my excel database may contain pair of products, each is defined in the above form but the pair of products are separated with a comma.
I need to calculate the total number of each product and split in two different cells.
For example:
Cell A1: 3GFG, 2AWS
Cell A2: 2NG, 1AWS
Cell A3: 1NG, 4GFG
Desired Output
==============
GFG7 (i.e. Cell A5: GFG , Cell B5:7 etc.)
AWS3
NG3
We are changing management systems here and in order to do so we need to provide the names and addresses of over 400 different people. Our current management system stores people's addresses as a whole for example; 32, Example Street, Town, County, Postcode.
I cant extract just the numbers because I only need the house number and not the postcode.
After searching several forums I thought I had solved it with this.
Cell A1 is the extracted address from current management system reading 32, Example Street, Town, County, IU13 8TY
Cell B1 is =LEFT(A1, SEARCH(" ",O15,1))
Cell C1 is =SUM(MID(0&B1,LARGE(ISNUMBER(--MID(B1,ROW(INDIRECT("1:"&LEN(B1))),1))*ROW(INDIRECT("1:"&LEN(B1))),ROW(INDIRECT("1:"&LEN(B1))))+1,1)*10^ROW(INDIRECT("1:"&LEN(B1)))/10)
That only gives me the number "3" though and I need 32.
Basically A1:A400 will be addresses as above and in cell B1:B400 I need just there house number at the start.
I have column A with Different status like Open, closed, available etc. Column B have numbers. i am looking for a formula in condition formatting for column B.
If the cell value in column B is 2 or more, the same cell should be highlighted in Green.
If the cell value in column B is 1, the same cell should be highlighted in Yellow.
If the cell value in column B is 0, the same cell should be highlighted in Amber.
If the cell value in column B is less than 0, the same cell should be highlighted in Red.
If the cell value in column A is "Available", cell in column B should be highlighted in Amber.
I have excel data where it runs like below:
Lumina
006
Ali Rashid Al Amin
61.40
Date
03/04/2013
11/04/2013
14/04/2013
check
20
Raja
I need a result column containing as below but where the numbers are removed those cells has been
Lumina
Ali Rashid Al Amin
Date
check
Raja
My excel database sheet contains inventory of products and quantities, each is defined in the form of combined number followed by text without a delimiter. For example 2AWS means Two (2) of AWS.
Each cell of the inventory field may contain up to two products, each product is identified in the above format; but the pair of products are separated with a comma.
The inventory field is occupying from cell $A$2:$A$5000; and is defined as a named range "INV_QTY" with scope within the entire workbook. I need to calculate the total inventory for each product.
Here's an example:
Cell A2: 3GFG, 1AWS
Cell A3: 2NG, 2AWS
Cell A4: 3AWS
Cell A5: 4QLK, 4GFG
etc.
The desired output should be calculated as follows (assume Input will be on Column C & D)
Product - QTY
GFG - 7 (i.e. Cell C2: GFG , Cell D2:7 etc.)
AWS - 6
NG - 2
QLK - 4
I have the following in cells a1,a2,a3 & a4 as follows:
A = 14
B = 15
C = 16
D = 20
Total = 65
I need to sum the total of the above, a,b,c & d and show the total. How do I add only the figures and get the total?
Got the following data in different cells:
And on a different sheet in the same workbook, have 45 different values to be converted:
What is required?
Knowing that using a VLOOKUP function, i can compare a value in the first cell to the list and return the desired value, i need to substitute the strings of characters with those the the list of 45 values so that i can proceed with my work.
Basically, for the 1st Cell for eg..
2232-2232-
I will need a formula to replace "2232-" by the value which a VLOOKUP function will give when comparing to the list of 45.
Result shall look like below:
20-20-
Looks simple when have the same set of characters in the cell, but for a cell which has multiple sets:
2210-22G1-45R1-45G1-20R1-20GP-
It becomes difficult for me. What i need exactly is:
Formula to substitute using the vlookup function so that it performs a lookup of the value in the specified cell with the list of 45 values and returns the value (20- or 40-) to be substituted in the cell. What i need finally is a set of 20- & 40- replacing the sets of present data.
I have created a hierarchy chart using smartart. Is there a way to hyperlink the texts in each box to other sheets in the workbook?
[URL]
I would like to create a formula that allows the destination cell display a number depending on a word that is typed in the source cell. The source cell and the destinating cell will remain the same two cells.
example:A2=IF(A1="WORD1",1.5,0)
If i type WORD1 in A1 (source cell) then A2 (destination cell) will display 1.5, but how do i make this formula work for a multiple of different words.
example:A2=IF(A1="WORD1",1.5,0 IF(A1="WORD2",3.0,0 IF(A1="WORD3",2.5,0)))
this formula doesn't work, but is basically what i am looking for the formula to do - WORD1 displays 1.5, WORD2 displays 3.0, WORD3 displays 2.5 etc where the source cell and the destinating cell remain the same two cells, it is just the word and its value that change.
I am looking for a macro to delete rows that DO NOT contain criteria. But what I could achieve so far is deleting all rows except the first word ie ACC here. My code so far is as follows
[Code] ..........
I have two texts in two cells. e.g in A1 I have JOHN, and in B1 I have SMITH.
I need to cocatenate these two texts in a third cell (=CONCATENATE(A1, B1) /or I can use = A1 & " " & B1). It's fine till I concatenate.
But I need the output in the following format:
JOHN SMITH
The second text needs to be in ITALICS.
I have a lookup table in which names of students and the planned session dates are available.
I need to create a chart that has Student Name and Each date of month. The chart should have value of 1 wherever a match is found in the look up table.
I am wondering if combination of searching for multiple strings (student name and date ) will work somehow. The below image explains my problem
StudentTimeTable.png
What I have: (Table1) A table with multiple columns. One column consists of cells that can contain different types of information in a non-consistent way. One thing is for sure: if a cell contains data, it will always contain a name of a person. E.g. a cell in that column could contain the following: "838374987343 based on 98989 John 990999", or "000000000john", or "William 39843984 more text and even more text"
(Table2) A separate table that contains the names of people in a column, e.g. "John", "William"
What I want:A formula that searches for the names (mentioned in Table2) in Table1 and copies this name in a new column.
Result:A new column with the copied names as content.
I have a very large database that contains names with minor differences on column A such as:
A
EXCEL AMERICAN COMPANY S.A.
EXCEL AMERICAN COMPANY SA.
EXCEL AMERICAN COMPANY, S.A.
ASSOCIATION, INDUSTRIAL
ASSOCIATION INDUSTRIAL
L.A. COMPANY CO
LA COMPANY CO
As you can see, this makes a mess when dealing with numbers associated with them and makes analysis more difficult.
What I've been trying to figure out is how to quickly get in column B a standard name for each one, for example:
B
EXCEL AMERICAN COMPANY S.A.
ASSOCIATION INDUSTRIAL
L.A. COMPANY CO
I was thinking of using a combination of the FIND and EXTRACT formula or maybe LEFT as well. (Maybe VB?)
i have wordlists which i would like to enhance through texts. For that purpose i need a macro which reads a text and splitts it into words and put the words into three columns. Lets assume the column where the words are supposed to be put is columns A,C and E. The column A should contain single words containing no spaces from Text, column C should contain compound words which have one space between them and in column E those compounds which have two spaces. Now i will put my existing wordlist in column G before i start splitting texts. The macro should put only those words from text into column A,C and E which dont already exist in columns A,B,C,D,E,F and G. In Column B i will place the corrected or checked words from column A. In column D i will type the corrections and checked versions of those compunds existing in column C. And the column F will contain the compound words which are corrected and checked from Column E.
Column A--> single words splitted from text through macro (containing no spaces)
Column B--> corrected and checked versions of words from column A through user
Column C--> compound words containing one space splitted from text through macro (for example:"etwas möchten" or "do something")
Column D-->corrected version of C through user
Column E-->compound words containing two space splitted from text through macro (for example:"sich uerberzeugen lassen" or "down in dumps")
Column F-->corrected E
Column G--> existing dictionary wordlist through user
Signes like ".", ":",";", "/" or quotation signe itself should be seen as seperator. And the words or compounds splitted from the text should not contain these signs.
The text will be put in another sheet in the same excel file. Lets call that sheet "text". The macro should search for words through whole sheet ignoring empty cells or columns.
None of the columns should be filtered or ordered. The columns shound not be deleted as well. That way the user wont have to correct the same word each time cus the corrected as well as the original words will be there.
A thread with similar purpose was made sent by AdamDay as well, where rylo has posted a good solution already.
I need to get a general formula which if possible, automatically calculates the frequency of unique texts (no duplicates) under a particular month (January) without manually inserting the cells which is under january. If possible, the formula will also check to see if the company is either Cash or Cheque.
I have three columns; Date, Company name and Payment mode.
Date ranges from 1 jan 2010 to 31 dec 2012. Cell A2 to A234
I want to color the cells for some specific texts in RED, and some in BLUE and some in GREEN.
For Eg: I want to color the cells in RED, which contains below specific texts in a sheet.
UNIX
LINUX
MS OFFICE
POWER POINT....like this for nearly 100 specific texts.
and I want to color the cells in BLUE, which contains below texts in a sheet.
JAVA
.NET
SQL
MSDOS....like this for nearly 100 more specific texts.
If i create a rule in conditional formatting for each text,I have to create nearly 400+ rules for my task now, which is not possible.
I have a worksheet ("ALL JOBS") with huge row data and the row data will vary every day. My problem is there will be a lot of blank cells which I need to fill manually and its tacking lot of time of mine.
Code to fill these blank cells automatically with some specific texts based on the attached conditions.
I have attached the workbook for more details. FillCellsTest.xlsm‎
I have options buttons in a userform, first is "$" the other is "€"
When somebody chooses one of them, it writes the choice to a cell in the data sheet. But when clicked on the next userform I want some of the texts automatically change the currency depending on the choice made in the previous userform.
The formula below was is example
=""&Data!$A$2&" / m³"
=""&Data!$A$2&" / kWh"
I have a multiple line texts I want to convert it in single line like for Example:
The following contents is to be converted in a single line
contents:
[aaaaaaaa] [bbbbbbb]......so on
[cccccccc] [ddddddd]......so on
[eeeeeeee] [fffffffffff]......so on
Result:
[aaaaaaaa] [bbbbbbb] [cccccccc] [ddddddd] [eeeeeeee] [fffffffffff]....so on
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I am extracting data from a website to excel 2010. my problem is the data contains both text, numbers, and sometimes a combination of both.
e.g. hi im ron for more information you can reach me at 6 five 6 four 5 seven 7 three 2 two..
I need it to look like this 6564577322 or 7 * 0 * 2 * 4 * 5 * 6 * 8 * 6 * 2 * 1...i need to look look the same
How do i first format the numbers written in text into numbers and then show only the numbers in a cell minus the text?
This is what I need:
Columns B, C, D & E are all populated with 3 digit numbers.
I would like column F to automatically populate with any of the 3 digit numbers that share two numbers, i.e.
F2 might look like this (using 00 as the pair):
001, 040
F3 might look like this (using 01 as the pair):
701, 051, 110, 001, 120
F4 might look like this (using 12 as the pair):
123, 721, 281, 912, 112, 120
etc...
I have a text file with rows and columns of numbers ranging from 1-4 digits that I'd like to import/copy into Excel with each number being in its own cell. But whenever I copy/try to import, Excel splits all of the 3-4 digit numbers up into single digit numbers. The text file has 10,000+ columns (each number occupies two columns so I have half of that amount in numbers) and 300+ lines.
Is the file simply too large for Excel to handle or is there a way I can do this?
In the ID column of the attached excel file whenever I convert the numbers stored as text to numbers it results in a weird transformation.
e.g. an ID of 480610141001 becomes 4.8061E+11. When I do the same process in the name column, which has similar numbers, it will give the correct result following the same process.
The format of the text in which I need to extract numbers is as follows:
23411268 - 23411270
Need to extract the following:
23411268
23411269
23411270
These numbers have to be listed in three seperate rows.
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
View 5 Replies View Relatedfollowing issue:
The following table is given:
flower
20
rose
flower
21
rose
[Code] ........
Which needs to be turned into:
flower
20
22
rose
flower
31
32
blossom
tree
1
3
apple
The last column is the one that dictates when a new range of numbers start. There should be one range of numbers for Rose, One range for Blossom etc.