Remove The "Number Stored As Text" Error
Jul 18, 2006
I am using a macro do display actual date, by copy pasting special, so that the day and month is always 2 digits: ie. 01, 02, etc. in case less than 10.
Private Sub Workbook_Open()
Sheets("Sheet2"). Range("C4").Select
ActiveCell.FormulaR1C1 = "=TEXT(TODAY(),""dd"")"
Range("D4").Select
ActiveCell.FormulaR1C1 = "=TEXT(TODAY(),""mm"")"
Range("E4").Select
ActiveCell.FormulaR1C1 = "=TEXT(TODAY(),""yyyy"")"
Range("C4:E4").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
Range("A4").Select
Sheets("Sheet2").Range("C4:D4").NumberFormat = "00"
End Sub
I paste special so the user does not see this formula. However, there is that annoying notification saying it is a number stored as text. What is the universal way to switch this warning off (or to better write the macro) so this warning will not be on any version of Excel?
View 4 Replies
ADVERTISEMENT
Mar 12, 2012
I have a spreadsheet which has over 30,000 records. One column is a row of numbers stored in a General format. Some of these numbers are however stored as Text and have the following Error Check:
"The number in this cell is stored as Text or preceded by an apostrophe"
As a result, when I try to import this sheet into Access, the numbers are not imported and appear as blank cells in the Table.
Is there a way either manually or programatically, format the column so all cells in that column are stored as a number and do not have the issue of being stored as text?
View 4 Replies
View Related
Dec 14, 2009
There is probably a really easy answer to this question but I cannot seem to figure it out. I need to calculate the sum of pages faxed on a fax report at my office on an excel spreadsheet which is downloaded from our server. It appears the file is not meant to be used in excel but it downloads as an "*.xls" file anyway. When I open the file I receive this message:
"The file you are trying to open, 'FaxCetailReport.xls', is in a different format then specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?"
The file is comnig from a trusted source so I select "Yes" and it opens just fine. There are just over 50 rows of info, one of them being the number of pages. In a blank cell I enter "=SUM(select rows)" and the result is a "0". I have converted the cells to the "number" format, no change. When I right click on the cells and select format, the protection tab on the right has the check box "Locked" checked and unchecking it does nothing, it is checked as soon as you go back in to the protection tab.
The only way around this is to manually retype the numbers in a cell next to the pages column, which is ok for 50 numbers, but I have some sheets where there is over 1,000 entries.
View 9 Replies
View Related
Nov 29, 2011
I have sent a data sheet template to my client in which they paste their data, based on this data sheet analysis will be done automatically in next sheet "Summary".
Whenever they paste product code, vlookup is not working since the product code contains few are numeric (shows: "Number Stored as Text"). I advised my client to go with "Text to Column" and "Delimited" to change it as numeric. But my client feels this method is tedious one. Is there any alternate way to make that column as numeric permanently?
View 5 Replies
View Related
Jan 3, 2009
I am trying to remove the numbers from a cell leaving just the text.
Say cell A1 contains Blk1Crd2 I would like say cell B1 to contain BlkCrd.
And preferebly I do not want to run a macro.
View 9 Replies
View Related
Dec 2, 2009
I have the following macro that I use to convert numbers stored as text to text. For some reason, if I try to use it twice in a row, it won't work, I get an error that says "application-defined or object-defined error" and highlights this part of the Cells.SpecialCells(xlCellTypeLastCell).Offset(1, 1).Copy
View 5 Replies
View Related
Aug 21, 2007
Column A contains numeric values that refer to a row number in column B. I need the value in column B to be outputted in column C. eg. if the value in Row 1 Column A = 55, the value in row 55 column B will be outputted in column C
View 3 Replies
View Related
Oct 9, 2007
I am trying to add a number to invoices (invoice numbers) on a UserForm that is used to make and/or modify scheduled service records for a cleaning business. We fill out the schedule well in advance of when the jobs are scheduled to be done, some customers are on a set schedule such as once a week, everyother week or once a month. Some just call in when they need cleaning. Each day has 27 rows set aside for possible customers (most are not used). We make out as many invoices in advance as is possible and fill-in the rest as they call-in. This leaves a lot of gaps between days
I have an auto-advancing formula tha takes a helper column to give me invouce numbers when there is a customer listed in column B and blanks space where there is no customer listed. This does make for volitile invoice numbers.
Formula in row 3 of the invoice coulmn "A": =IF(B3="","",H3)
Formula in row 3 of helper column "H": =IF(B3="",H2,H2+1)
The helper column only advances if there is a customer listed in column B of that row otherwise it repeates the last number. The invoice column only displays this helper number if there is a customer listed in column B of that row. I can't figure out how to get this to work on a UseerForm with vba.
View 8 Replies
View Related
May 5, 2014
I do have the following problem:
When I use the SUMIF(S) function and a criteria range that has numbers stored as text (eg: '394) the unequal operator (<>) doesn't work.
=SUMIFS(B:B,C:C,"<>493") doesn't work
I'm able to get the salary of employee 493 by using "493" instead of "<>493", but it seems that with the unequal operator Excel starts treating this ID as number. The only work-around I found so far is to use a wildcard e.g. "<>*493" or "<>493*". Excel then treats it as text again, but this is dirty workaround. What happens if an employee with an ID e.g. 1493 shows up!?
"<>'493" or something doesn't work unfortuantely..
Employee ID
Salary
'250
10000
'493
13000
View 14 Replies
View Related
Sep 17, 2013
In a spreadsheet I have a text column with entries such as:
2012
10 Times
10.5 Times
101 Times
25 Times
A Pure Text Entry
When I sort by this column I expect to get:
10 Times
10.5 Times
101 Times
2012
25 Times
A Pure Text Entry
Instead I get the 1st order. Why? I've selected 'Sort numbers stored as text' separately so it shouldn't be treating 2012 as a number. Besides I've checked & the cell formatting is Text.
View 3 Replies
View Related
Dec 6, 2011
I received one excel spreadsheet office 2010 every week from one on the vendor. it has over 55000 rows. I got columns N, O, P & Q. these columns has some value which I use for my pivot tables. However the values in this columns are stores as a text. I select the little small box (information box ) appears on the right side of the cell and right click on that where I get an option to change it to number. This is working well.
However I have over 55000 rows , it takes a lot of times to change all these cells in four columns ( almost over 220,000 cells). some times more than an hours.
I use excel 2010.
View 3 Replies
View Related
May 8, 2008
I would like a macro which works on the selected cells:
A number of the selected cells contain formulae with an apostrophe in the beginning.
I need the macro to remove the apostrophe and calculate the formula in those cells..
View 9 Replies
View Related
Dec 6, 2006
I have a problem with entering 12-hour time data in excel.
If I key in 3:00, Excel will recognise it as 3:00 AM.
If I key in 3:00 p, Excel will recognise it as a text entry. To get Excel to recognise it as 3:00 PM, I have to use the 24-hour format. i.e. I have to type 15:00.
I have checked the Regional and Language option in the Control Panel. Everything looks fine.
Does anyone have such encounter with Excel before?
View 9 Replies
View Related
Oct 28, 2008
I am using an ODBC database connection to input data into an excel file. When I input the data excel stores the numeric data as text and puts a ' in front of the number. There is an exclamation mark beside the cell which allows me to convert the data back to numeric format. I need excel to do this conversion for me automatically when new data is added to the file.
View 9 Replies
View Related
Aug 1, 2012
I was using SUMIFS on a large amount of data, but wasn't getting back the exact sum that I needed.
It turns out that I had cells with values similar to the following
Code:
000123
0123
Basically, text fields with the same numerical values, except for the number of leading zeros. Due to the nature of the table, the number of leading zeros is important.When I did SUMIFS, it counted the sum of the two values together. For example with the following:
Item
Batch
Qty
ABC
123
1
It appears that even if a numeric value is stored as text, SUMIFS treats it like a number.
View 3 Replies
View Related
Mar 31, 2014
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies
View Related
Sep 11, 2013
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
View 4 Replies
View Related
Oct 22, 2009
In the ID column of the attached excel file whenever I convert the numbers stored as text to numbers it results in a weird transformation.
e.g. an ID of 480610141001 becomes 4.8061E+11. When I do the same process in the name column, which has similar numbers, it will give the correct result following the same process.
View 2 Replies
View Related
Nov 5, 2013
I would like to change a number to a letter and then drop a digit from the end.
Say my data in A1 reads 81234568, and I would like it to display in cell A2 as h123456.
View 3 Replies
View Related
May 23, 2014
I have been looking through the forums and found the below code, but I have both text and numbers in the same range. I have attached an example of what I need to have converted.
Book1.xlsx
View 3 Replies
View Related
Feb 9, 2007
I'm looking for the VBA command for this function. I tried just recording a macro in where I perform the task but it didn't record anything. Tried it several times even.
View 7 Replies
View Related
Aug 15, 2009
Name
M1
M2
M3
M4
Total
%
A
50
45
13
-
108
#VALUE!
B
40
78
14
35
167
41.75
C
68
-
15
-
83
#VALUE!
D
97
74
16
12
199
49.75
Total
255
#VALUE!
58
#VALUE!
Q.1 :
I Want to remove "#VALUE!" error but I do not want to remove "-" sign. I want "-" sign to be treated as "0".
I also cannot use "sum" formula due to some reason & the value can be changed.
View 9 Replies
View Related
Jun 12, 2014
I have the following two columns, and would like to obtain for each individual Company, the corresponding Country values excluding duplicates as text in a single cell.
Company 2Country B
Company 2Country C
Company 3Country C
Company 3Country C
Company 5Country A
Company 5Country C
Company 5Country C
For example:
- For Company 2, a cell containing "Country B, Country C"
- For Company 3, a cell containing "Country C"
- For Company 5, a cell containing "Country A, Country C"
I've approached generating an array using an IF statement, as in =IF(INDEX(A1:A8="Company 5",,),INDEX(B1:B8,,)," "), which returns the following array: ={" ";" ";" ";" ";" ";" ";" ";"Country A";"Country C";"Country C";" ";" ";" ";" "}.
The question is: how do I get that array to produce, as text in a cell: "Country A, Country C". Note that the duplicate Country C has been removed.
There are a few "StringConcat" User-defined functions that I've found elsewhere on the internet, but they don't seem to be able to handle to conditionally generated IF Index array, which I would think is key to parsing between Countries corresponding to each Company in the list.
View 3 Replies
View Related
Nov 15, 2006
How to remove div/0 value from excel cells.
i got this when i used formula where denominator is zero . is there any function to do or we should write any macro for that.
View 9 Replies
View Related
May 25, 2009
criteria is bascially month and week based when i apply average forumla for a month i did get the avg for a month but when a record for tht month is unfilled
eg weekend is off so no values for that date that displays div/0 error.
I want a Macro which cud change this div/0 error in a selected range to be null
so it didn't reflect in avg function on final sheet and gives that value there. i know that it can be handle by updating the forumla
=IF(B1=0,"",A1/B1)
but i want this solution for 30 sheets for which in value filled range macro either deletes div/0 error or place null value there.
View 5 Replies
View Related
Jun 19, 2009
i m working on an excel 2007 workbook with ms project functionality. in order to be able to use ms project from within excel i m using early binding. for those who dont know what early binding is: http://www.dicks-clicks.com/excel/olBinding.htm
this works fine if the user has ms project installed on his/her pc.
if the user does not have ms project installed i remove the broken references. this works fine.
but my problem is that when i remove the reference to ms project, my vba project will not compile correctly. thus each time when a user opens the workbook the user gets a "compile error in hidden module" , since the functions of ms project are not available.
for example i get a compile error in the following source
Public Function getResID(ResName As String, ActiveProject As Project) As Integer
Dim res As Resource
For Each res In ActiveProject.Resources
If res.name = ResName Then
getResID = res.ID
Exit Function
End If
getResID = -1
Next
End Function
i just want to know what i can do to prevent the compile error? would the use of late binding remove the problem? actually i dont want to use late binding since my source code is already very complex and it would be a huge effort to change it.
View 9 Replies
View Related
Jul 12, 2002
I have a column in which the cells contain values such as "012321 BGH YRK". Is there any way you know of that I can remove just the text from every cell and keep the numeric values? A mass operation because there are literally hundreds of these cells. I am using Excel 2001.
View 9 Replies
View Related
Dec 12, 2011
I'm trying to remove lines in my line charts. I searched the internet and find the following code:
Code:
Sub RemoveLines()
Dim ser As Series
For Each ser In ActiveChart.SeriesCollection
ser.Format.Line.Visible = False
Next ser
End Sub
However, when I run the code, I got "Object doesn't support this property or method". I did select the chart. I have excel 2003 with vba 6.5.
View 1 Replies
View Related
May 15, 2007
I have a large spreadsheet, within which i am trying to remove commas from all cells. I get the error 'formula is too long' when I carry out the search. Some of the cells are >1024 characters in length and contain dates, text etc.
View 5 Replies
View Related
Jan 30, 2008
I have a number of similar templates on a server used to produce quotations from other files with lookup formulas. They all have 2 modules, 3 & 4. Module 3 deletes certain data and shows values instead of formulas for most of the pricing etc. Module 4 contains a macro that logs info in another central workbook on the server.
If 2 files are opened based on the same template at once, when the Quote_Wrapup macro (in module3) is run on one of the open files(code follows) from a button on the spreadsheet it often produces a Run-time error '9' Subscript out of range error.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("D8:E9").ClearContents
Range("D8:F9").Interior.ColorIndex = xlNone
Range("qdata5").Font.ColorIndex = 2
Range("qdata6").Font.ColorIndex = 2
Range("A18:A1018").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value
Range("A980") = Range("A980").Value...................
View 8 Replies
View Related