Name
M1
M2
M3
M4
Total
%
A
50
45
13
-
108
#VALUE!
B
40
78
14
35
167
41.75
C
68
-
15
-
83
#VALUE!
D
97
74
16
12
199
49.75
Total
255
#VALUE!
58
#VALUE!
Q.1 :
I Want to remove "#VALUE!" error but I do not want to remove "-" sign. I want "-" sign to be treated as "0".
I also cannot use "sum" formula due to some reason & the value can be changed.
How to remove div/0 value from excel cells.
i got this when i used formula where denominator is zero . is there any function to do or we should write any macro for that.
criteria is bascially month and week based when i apply average forumla for a month i did get the avg for a month but when a record for tht month is unfilled
eg weekend is off so no values for that date that displays div/0 error.
I want a Macro which cud change this div/0 error in a selected range to be null
so it didn't reflect in avg function on final sheet and gives that value there. i know that it can be handle by updating the forumla
=IF(B1=0,"",A1/B1)
but i want this solution for 30 sheets for which in value filled range macro either deletes div/0 error or place null value there.
i m working on an excel 2007 workbook with ms project functionality. in order to be able to use ms project from within excel i m using early binding. for those who dont know what early binding is: http://www.dicks-clicks.com/excel/olBinding.htm
this works fine if the user has ms project installed on his/her pc.
if the user does not have ms project installed i remove the broken references. this works fine.
but my problem is that when i remove the reference to ms project, my vba project will not compile correctly. thus each time when a user opens the workbook the user gets a "compile error in hidden module" , since the functions of ms project are not available.
for example i get a compile error in the following source
Public Function getResID(ResName As String, ActiveProject As Project) As Integer
Dim res As Resource
For Each res In ActiveProject.Resources
If res.name = ResName Then
getResID = res.ID
Exit Function
End If
getResID = -1
Next
End Function
i just want to know what i can do to prevent the compile error? would the use of late binding remove the problem? actually i dont want to use late binding since my source code is already very complex and it would be a huge effort to change it.
I'm trying to remove lines in my line charts. I searched the internet and find the following code:
Code:
Sub RemoveLines()
Dim ser As Series
For Each ser In ActiveChart.SeriesCollection
ser.Format.Line.Visible = False
Next ser
End Sub
However, when I run the code, I got "Object doesn't support this property or method". I did select the chart. I have excel 2003 with vba 6.5.
I have a large spreadsheet, within which i am trying to remove commas from all cells. I get the error 'formula is too long' when I carry out the search. Some of the cells are >1024 characters in length and contain dates, text etc.
View 5 Replies View RelatedI have a number of similar templates on a server used to produce quotations from other files with lookup formulas. They all have 2 modules, 3 & 4. Module 3 deletes certain data and shows values instead of formulas for most of the pricing etc. Module 4 contains a macro that logs info in another central workbook on the server.
If 2 files are opened based on the same template at once, when the Quote_Wrapup macro (in module3) is run on one of the open files(code follows) from a button on the spreadsheet it often produces a Run-time error '9' Subscript out of range error.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("D8:E9").ClearContents
Range("D8:F9").Interior.ColorIndex = xlNone
Range("qdata5").Font.ColorIndex = 2
Range("qdata6").Font.ColorIndex = 2
Range("A18:A1018").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value
Range("A980") = Range("A980").Value...................
I am using a macro do display actual date, by copy pasting special, so that the day and month is always 2 digits: ie. 01, 02, etc. in case less than 10.
Private Sub Workbook_Open()
Sheets("Sheet2"). Range("C4").Select
ActiveCell.FormulaR1C1 = "=TEXT(TODAY(),""dd"")"
Range("D4").Select
ActiveCell.FormulaR1C1 = "=TEXT(TODAY(),""mm"")"
Range("E4").Select
ActiveCell.FormulaR1C1 = "=TEXT(TODAY(),""yyyy"")"
Range("C4:E4").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
Range("A4").Select
Sheets("Sheet2").Range("C4:D4").NumberFormat = "00"
End Sub
I paste special so the user does not see this formula. However, there is that annoying notification saying it is a number stored as text. What is the universal way to switch this warning off (or to better write the macro) so this warning will not be on any version of Excel?
I have found a very useful UDF for removing non-alpha characters from strings. (See below, Credit for posting to Stanley D Grom - Ozgrid post ´Removing Non-alpha Characters From Text´).
Option Explicit
Private Function RemoveCharacters(InString As String) As String
Dim intLoopCounter As Integer
Dim intStringLength As Integer
Dim intASCIIVal As Integer
intStringLength = Len(InString)
InString = LCase(InString)
For intLoopCounter = 1 To intStringLength
intASCIIVal = Asc(Mid(InString, intLoopCounter, 1))
If intASCIIVal >= 97 And intASCIIVal <= 122 Then
RemoveCharacters = RemoveCharacters + Mid(InString, intLoopCounter, 1)
End If
Next intLoopCounter
End Function
Two requests:
1. Could the UDF be modified such that any part of a string contained within brackets is also removed (e.g. "NLGA High Street (West-Enfield), EN6" becomes "nlgahighstreeten")?
2. Can an argument be added to the format of the UDF, such that numbers (0 to 9) are either included or excluded (e.g. RemoveCharacters(A1,1) where the argument ´1´ would include any numbers (0 to 9), so "NLGA2003 High Street (West-Enfield), EN6" becomes "nlga2003highstreeten6")? ´blank´or ´0´would exclude these numbers, i.e. would return "nlgahighstreeten"
Error Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
View 5 Replies View RelatedOK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code:
If DateBox vbNullString And DateValue(DateBox) > checkdate Then
M1 = "NEOPRENE" & Chr(13)
Else
M1 = "" & Chr(13)
End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
View 3 Replies View RelatedI have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View Relatedwhether I can handle errors in a way that tells me which object caused the error?
For example if a userform has two combobox's and one causes an error, can I return to a message box containing the name of the object (combobox1 or combobox2)?
I have tried returning err.source but I am either not using it correctly or it isn't intended to be used this way.
I'm getting the error for the following piece of code.
Sub itconfandscratch()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "sturecord"
Database_Name = "Scratch" ' Enter your database name here
SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
my lookup isnt returning the correct data- already tried sorting it doesnt work im pretty sure ive put in the correct formula
View 6 Replies View RelatedI have a very simple spreadsheet that generates a "backing page" for items to be physically pasted to (essentially nothing more than printing a header). I have the following code under "This Workbook" to avoid being prompted to save changes when closing, as this spreadsheet is just a template and changes should not be saved...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close False
End Sub
The code does as is intended, but, if any other spreadsheets are open at the same time, I get an error message pop-up saying "EXCEL has encountered an error - an error log has been generated"... Excel then shuts down. So, first question; where should I look for the error log?
VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
Before I go into details I am working in one workbook with several worksheets(Tabs) in the workbook. I have three Buttons on one tab. the button I am having trouble with is the third. I want to insert a column in a separate tab that contains approximately 87,000 rows of data. I then want to do a row count and select the empty cells in the inserted column and put a formula in there. I have tried a loop VBA code and it works, but it takes about 30 minutes to run all the way through. The underlined portion is what is higlighted with error 1004: Application-defined ro object-defined error. I am not sure how to fix this. This is what I have now:
View 13 Replies View RelatedI imported some data from an MDB file while working at home. created a macro to that effect. and it works fine at my home PC. but when i try t execute this macro on another PC or work place, then it gives error #13. i dont understand why. something is wrong with the code. i think it is the "WITH" code for query tables connection giving error ....
View 9 Replies View RelatedI'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
View 9 Replies View Related"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
I have a VB function in a worksheet that requires data from a workbook that is not under my control. The problem is that the workbook does not always have complete data. Often cells are filled with #VALUE, when this occurs I need a way to tell my VBA to assume a value of 0. I have tried using if(cell="#VALUE", 0,cell) but to no avail. any suggestions?
View 7 Replies View RelatedI have written a long bit of code, which works fine. I decided to add an error handler just in case of any errors. I have run through my code numerous times to confirm that there is no error, but the msgbox still pops up.
View 3 Replies View Related