how to replace a range of cells in excel with another range of cells for an entire workbook?
The top range being what I want to replace the Bottom Range with for the entire book
snapshot of the File is attached and the highlighting is to show the range and is not part of the workbook formatting.
I need in every column in every rows (that is in whole document ) change symbol, to, (that is before every comma, I need add back slash ).
View 1 Replies View RelatedI have code that was working with cell references. I replaced one of the cell references with a Defined Name that I applied to the cell that was previously referenced in the code. The code does not work with the Defined Name now. In the code below, the Name "FeeType" was previously where the cell reference was. I have attempted to fix the reference by changing the use of " 's ....
View 9 Replies View RelatedI wonder is there a way in excel to replace multiple words at once. To have like script where I had all words that need to be replaced and words replacing those. And just click the button and done? More specifically I'm translating some exports in xls and there are few words repeating over and over again in every document. So for example I need to replace word parfem for perfume like 500 times in one excel document atd. I think there has to be a easier way to replace those words at once.
View 5 Replies View RelatedI am doing a "text to columns" in a VBA script and each time it runs I get a "Do you wnat to replace contents of the destination cells" prompt. I will always say yes to this prompt. Is there something I can put into the code to avoid this prompt all together, again the answer will always be yes to the prompt.
View 3 Replies View RelatedI have been using this code below to replace any blank cells with the number 0 but recently I have encountered an error if the format of the cell is a string.
Code:
Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Selection.SpecialCells(xlCellTypeBlanks).Value = "0"
Is there a way to change this so it looks at the length of the cell, if the length of the cell is 0 then set the value = 0?
As you can see in attached file (hopefuly you can see it) pivot table Summed sales in 2014 and 2013 in column GRAND TOTAL. Insted of summing this two years, I would like to show difference between them, but keep this layout!
PROBLEM.jpg
I'm running Excel 2010.
In a field containing this: Bergamot, Orange*(11,16) I want to put a space before the asterisk. There are hundreds of these in the spreadsheet with other text before and after the text to be replaced. I made sure the field is defined as a text field.
I searched on "*(" and said replaced with " *(" and ended up with " *(11,16)" - the Bergamot, Orange was removed from the field.
We have a report with 2 different sheets. On sheet one there are 13,000 rows of data and columns A-H are filled with different data. column A is our item id and column G has a date that states when the item was sold last. Well, the date in column G is wrong for about 7800 rows and needs changed.
The second sheet in the file is the 7800 rows with just the item id in column A and the correct date in column B. We are looking for an easy way to replace the rows in the first sheet with the correct information from the rows in the second sheet without manually replacing it line by line.
I almost forgot to add in, that in both sheets, column A with the item ids are the same item ids on both those sheets. So column A on sheet one has 13000 rows and included in those 13000 are the 7800 item ids on sheet 2.
We tried using the VLookup function that is incorporated into excel but had absolutly no luck, mostly because we have never used this function before. Sheet one already has all the lines of sheet 2, its just that sheet one has the wrong dates for the item ids and sheet 2 has the correct dates. im trying to replace the dates on sheet one from the dates on sheet 2 matching on the item ids from both sheets......
I am having a set of data. Every month I need to filter for some values and replace data in some cells.
In the attached file I have given the data and also the filter conditions and what column I need to change.
creating a macro where in the filters and the changes to be made are in the table. The macro should use these conditions and make the changes.
need to add same data to every other existing cell in the column, but not replace the data already in it, but to add to it. I've tried to google the answer and look here, but I probably use bad search terms.
For example, I need to add "QW" after each of these lines:
data1432
data9292
data3933
data3939
so it would look like this:
data1432QW
data9292QW
data3933QW
data3939QW
I have a few thousand rows of data, so wouldn't rather not do it manually cell by cell by typing :-)
I'm making a vba macro that takes a workbook and splits and saves it as individual sheets. In this process I need to find all the referenced cells (ie =E5) and change them to their text or numeric value. A few things I've found on the form and tired with no success:
Selection is a column selected from the top to the last used cell (I know there is only 4 columns that have references)
VB:
Selection.Copy
Selection.PasteSpecial Paste = xlPasteValues
Also tried:
VB:
ActiveSheet.UsedRange = ActiveSheet.UsedRange.Value
I feel like one of these should be working. But even after the paste the values are still references.
Edit: An afterthought, if I were to select the whole sheet and do a copy/special paste would it replace all formula cells with their calculated value?
I'm trying to use the Worksheet_Change event to replace all cleared cells with a default formula. This allows users to override the default, or restore the default when they need to:
If Not Intersect(Target, Range("Data")) Is Nothing And Target.Value = "" Then
Range("DefaultFormula").Copy
ActiveSheet.Paste
ActiveSheet.Application.CutCopyMode = False
End If
Here are the results with various different regions selected:
Single cell selected and cleared -- works. Multiple cells selected and cleared -- doesn't work if the first area selected contains more than one cell. Otherwise, it works, no matter how many other areas are selected.
Example1: Selected range is (D2:E2, G2) in that order, it does not copy the formula into the cleared cells. Example2: Selected range is (G2, D2:E2) in that order, the code does copy the formula into all the cleared cells as desired.
The "IF" condition is not TRUE when the initial area has more than one cell.
I'm trying to simplify a spreadsheet i've been given by defining names for certain values. I'm using Excel 2013. Is there any way to have all of the newly defined names I've created for cells automatically be inserted into all of the formulas that exist in the spreadsheet?
Example.
Old formula in one sheet of a workbook looks up a cell in another sheet with the value of ='sheet1!A1
I've given the value of cell A1 in Sheet1 a name of dgwd.
How do I get every formula in the workbook that references 'sheet1!A1 to change the value within that formula to dgwd?
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I am my excel worksheet (excel 2010) I have one cell that changes every day (number). I want this number to open my htm document and replace the same number in a string in the htm and save/close this.
An example:
My htm document is located at C:/ and named XX.htm
The number I want from excel is in cell A1 in sheet1, and the worksheet is located in D:/ named yy.xlsx
And the text(number) I want to replace is in the following string in the htm document, in this string it is 72, next day it can be 30:
src="Bilder/72.png"
If I want to store bar codes in a range of cells in Excel, how do I format the cell so the barcode appears as scanned in.
We are scanning in Barcode from our inventory to our excel stock book.
I am doing it now but when we export it out or link it to an access table, it either does not appear or is truncated.
I just need to convert a range of cells into a PDF with a macro, is there a simple macro for this?
View 6 Replies View RelatedI am using Excel 2013
I need to print to a printer that is not the default printer, a range of Cells e.g. B4:L28 on Sheet Print Out.
The code is to be added to a VBA routine that already exists that collects & arranges the data on the Print Out sheet from other sheets in the workbook. This routine is assigned to a button on another sheet.
I'm using Excel 2003. I've got two different .XLS files, each with multiple sheets.
I'm trying to create a macro which will copy a range of cells from one sheet on one .XLS file (which is closed) to a specific place on a specific sheet on the current .XLS file (which is open).
So for the sake of argument:
I've got two Excel files: C:ApplesOldFile.xls and C:OrangesNewFile.xls
OldFile.xls is closed -- NewFile.xls is open and in front of me.
I'm trying to copy the data in ranges B6:C41 and F6:F41 from Sheet2 in OldFile.xls to the same ranges on Sheet6 in NewFile.xls. There are no formulas in these cells -- just data (numbers).
I keep getting error messages, failures to copy to clipboard, etc.
I would like to mirror a range of cells between two sheets in the same workbook, so that if the data is manually input into one of the cells in range (E5:H11) in 'Sheet 1', it is automatically updated in the corresponding cell in (H33:K39) of 'Sheet 2', and vice versa.
Using Office 2013. T
Using Excel 2007.
I have shapes in 3 different rnages of cells on a cell worksheet:
R1 = $D$5:$D & lngRows (row=32)
R2 = $G$5:$G & lngRows (row = 51)
R3 = $M$5:$M & lngRows (row = 50)
I need to set the properties of the shapes in each range differently The shapes in R1 are Left + 46 But the shapes in the other 2 ranges need to be just left My problem is in this bit
Code:
'Set properties for each shape in ShapeRange
For Each sh In ws.Shapes
I need to be able to set properties for each range separately instead of the entire sheet. Full code below (only Range $D at the moment - works)
Code:
Option Explicit
Sub AddShape3()
'Purpose: Add small rectangles to database table/fields for
' brainstorming and documenting relationships and queries
'
'Resources:
[Code]....
I am using windows 7 64bit sp1 and excel 2010 32bit sp1
I am trying to fix this formula (it takes a range in a unique column, and multiple row:
Code:
=IFERROR(INDEX($B$1:$B$6,SMALL((IF(LEN($B$1:$B$6),ROW(INDIRECT("1:"&ROWS($B$1:$B$6))))),ROW(A1)),1),"")
from here
I want to make it work on my array in a row, like this: (i need to remove the blank cells and the output have to be still in a row)
value1
empty cell
empty cell
value 2
value 3
empty cell
output:
value1
value2
value3
I need a function becouse I have dynamic table with something like 10k rows and 50 columns.
using excel 2010
I created named range selection called "Contractors".....how do I put the drop down lists in a column of cells now?
I am using Excel 2007.
Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.
28-May29-May30-May
0.50.50.5
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell
I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.
For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.
I have a worksheet which has various figures for each day of the week however I need to establish the weekly average of these figures.
Due to the way in which the figures are displayed, I am unsure how to use a formula which does not require a range with cells located adjacent to one another.
I have attached a test sheet as an example. The cells in yellow require the formula and I need a weekly average for criteria 1-3. This formula also needs to be compatible in Excel 2003
Test Sheet.xls
I'm new to Excel 2007... whilst I'm managing to find most things I'm used to using in 2003, I have an issue in one workbook that I can't figure out.
When I click in some single cells (not all), that cell and several below it automatically highlight as a range... left-clicking initially highlights the cell, but as you release the mouse button, the others below it also highlight.
I have a range selected (A4:C15).I would like to deselect the range and make A4 the active cell. Is this possible without a macro?
With a macro, one could use:
Application.Goto Selection.Cells(1)
I generally select a large number of cells and would like to go back to the start cell in the range. I could do it by pressing the left and right arrow keys but is there a shortcut that will allow me to do the same?
I am trying to clear the contents of a range of contiguous cells (containing formula) in Excel 2010 64bit. But it is taking a LONG time (read >30min to clear a range 288 x 100). Originally was doing it in VBA but it was taking too long so I started stepping through the macro and identified that the slow down was occurring on a particular sheet only. So the problem is in Excel....not VBA because it is still very slow when deleting the same range in Excel without using VBA.
I've tried all the usual suspects including: Application.EnableEvents = False (run from the VBA Immediate window when using Excel without VBA), Setting to Example of slow clear contents5.xlsxExample of slow clear contents5.xlsxManual Calculation, Turning off screen updating, deleting all the conditional formatting on the sheet, removing any data validation from the sheet (yes all these at the same time). There are no links to external workbooks. I've even tried in VBA changing from .ClearContents to .Value = vbNullString. All to NO AVAIL! By way of background the file is about 72Mb #.xlsm.
If I try to clear contents of larger ranges on other sheets in the same workbook it is instantaneous. If I copy the problem worksheet off to a new workbook, I can delete the problem range almost instantly. Why deleting a range of cells should take so long! Again to clarify, I am using the terms "delete" and "clear contents" interchangeably, but they both mean "clear contents" (not delete and move up cells). P.S I've also looked into the reported conflict between Excel and Google Desktop Office Add-in (Office Button->Excel Options->Addins->Com Addins and deselect Google Desktop Office Addin) but I didn't have Google Desktop Office Add-in so it isn't that.
I'm using excel 2007, here's what I need.
I want to count the number of cells in a range that have text in them (any text at all) but not count them if they have numbers in them or are blank. How would this formula be written?