in the timber industry stock lengths for timber start at .900 then go up in .300 mm incriments.
how can i have userform textbox2 return a result as below:
if textbox1 = 2.701 or 2850 or 2.999
textbox2 = 3.000.
if textbox1 = 3.001 or 3.256 or 3.299
textbox2 would = 3.300
so on and so on
i could write a heap of if formulas but i would need every combination from .900 to 6.600
I've got 2 radio buttons to select if i want roundup or rounddown but i don't manage to get the round down process to work.
View 2 Replies View RelatedI have a number in a cell (12.34) I wish to copy this number into a user form textbox. I can copy the number, however it is about 6 places behind the decimal point. How can I round the number going into a textbox to 2 places?
View 7 Replies View RelatedI need to determine if excel cell contains any character except number If it contains any character then place 1 in adjacent cell for example, otherwise 0
Column A B
150 000 1
150000 0
150,000 1
150.000 1
150000 kzt 1
150000kzt 1
I am trying to display the results that i get in excel sheet in a userform using textboxes; I need to round off the digits in these textboxes so as to display 2 digits after decimal point! I would like to have the code to solve this problem!
View 4 Replies View Relatedfor a column the user will enter a numeric 1 and it will return a specfic dollar amount, example enter 1 to return 4.79
View 4 Replies View Relatedi am using this code which was provided by a kind ozgrid member
If Not IsNumeric(Me.txtLength.Value) Then MsgBox "Use numbers only", vbCritical, "Numbers Only"
With txtLength
.SelStart = 0
.SelLength = Len(txtLength)
End With
unfortunately it will not allow me to use a decimal point EG: 2.5. allow a deciaml point?
who can restrict the input values to numeric values only? I have 2 textboxes where the user enters employee id and numeric choice value of 1,2 and 3...I need help in making the textboxes restricted to numeric values input only. How Preventing the users from entering alpha and symbols values.
View 6 Replies View RelatedI've got a userform for pricing items and am having an issue when changing margin. I want to validate the user enters in .22 or 22%. The code places the decimal value in a worksheet just fine and runs back end calculations. I want to make sure no one fat-fingers .12b by accident so I came up with the following code. It seems to run fine, but if I tab over a couple of textbox (there are 4 Margin textboxes) it trips the coding for that textbox even if there was no change to the value.
Code:
Private Sub txtPDLaborMargin_AfterUpdate()
If IsNumeric(txtPDLaborMargin.Text) Then
Range("LaborMargin") = txtPDLaborMargin
[Code].....
how to validate the value is numeric
In the userform I have several textboxes with default values. There are five text boxes that the user can modify and three whose values I want calculated based on the values of the five modified. This is how I initialized the userform :
Private Sub UserForm_Initialize()
Workbooks("Main.xls").Activate
A_BB_and_HBP.Value = Worksheets(5). Cells(2, 35).Value
A_H.Value = Worksheets(5).Cells(2, 36).Value + Worksheets(5).Cells(2, 37).Value + Worksheets(5).Cells(2, 38).Value + Worksheets(5).Cells(2, 39)
A_2b.Value = Worksheets(5).Cells(2, 37).Value
A_3b.Value = Worksheets(5).Cells(2, 38).Value
A_HR.Value = Worksheets(5).Cells(2, 39).Value
Worksheets(5).Cells(2, 41).Value = A_BB_and_HBP.Value
Worksheets(5).Cells(2, 42).Value = A_H.Value
Worksheets(5).Cells(2, 43).Value = A_2b.Value
Worksheets(5).Cells(2, 44).Value = A_3b.Value
Worksheets(5).Cells(2, 45).Value = A_HR.Value
A_AVG.Value = CStr(CSng(A_H.Value) / (130 - CSng(A_BB_and_HBP)))
End Sub
Then I have :....................
When the user changes A_H, A_AVG remains at its default value.
I want one procedure that will validate the CURRENT textbox (not named by name, to allow for the procedure to be included in the change event of several different textboxes), to see if it is numeric (decimal places allowed) in Excel 2007.
I followed the instructions here: {url}, which describe exactly what I want to do. So I put the final procedure listed on that page (the dynamic validation code) into the private module of the user form object as listed below:
Private Sub pipes_Change()
OnlyNumbers
End Sub
Private Sub OnlyNumbers()
'This procedure checks to see if the value
'of the current textbox is a number or not
If TypeName(Me.ActiveControl) = "TextBox" Then
If Not IsNumeric(.Value) And .Value <> vbNullString Then
MsgBox "Sorry, only numbers are allowed."
.Value = vbNullString
End If
End With
End If
End Sub
I then ran the form and typed a number into the "pipes" textbox that had been validated. A compile error is thrown: "Invalid or unqualified reference", highlighting the ".Value" portion of IsNumeric. I tried to remove certain parts of the code, such as the IF statement and the "And .Value <> vbnullstring", but nothing works. I have a feeling it is because this code was created for Excel 2003 (though I'm not certain).
I have uploaded a copy of the spreadsheet I am working on and have completed the user forms and coding for march the 1st only, so if you test, please use the options march and then the 1st!
The problems i have is, when I enter a number into a text box and press next page, the numbers fill where i want them to but the cells do not recognise them as numbers, therefore conditional formatting doesnt work! Even if I change the cell properties to numbers, this does not remove the error!
Second problem!! If a user forgetts to enter a value in a box, or they wish to edit just one value, and go back into the user form to change a figure, when they press next page, all the values in the column seem to disappear!
I try to sum up values a user enters into 3 different textboxes using the following
cells(1,1) = userform.textbox1.value + userform.textbox2.value + userform.textbox3.value
Let's imagine the user enters "10" into each of the three textboxes, cell a1 should contain 30, however, what i get is 101010.
I have five text boxes on a user form. I would like the 5th box to always equal 100 - the Sum of the other boxes, and never go below 0.
In other words, the text boxes are representing percentage breakdowns - so to validate the percentage entry in each box i want the last box to 'count down' from 100 as the percentages are distributed amoungst the other boxes. This box will also be a percentage figure, so is crucial it has its own box (rather than just saying these four boxes have to total 100) i hope this makes sense!
I have tried a code along these lines (see below) - (adapted from this forum but couldnt get it to work) I also found a version where one poster used a command to change the 'value' from string to numbers - but have been unable to find that again.
Private Sub txtbox1.change()
txtbox5 = 100 - (CCur(txtbox1) + CCur(txtbox2) + CCur(txtbox3) + CCur(txtbox4))
End Sub
I've have been building a UserForm for data entry into a stock demands system. One of the data entry items is a text box asking the data-inputter to complete a field containing the items drawing reference from the technical manual. The field can be quite long, and is often repeated for multiple items within the same drawing. Unfortunately, a ComboBox item would be have far to many items to make it useful, and so the TextBox item was preferred for this task.
My problem is that I need the TextBox to be able to recall/remember previous entries that have been saved to the data sheet in the workbook and the UserForm is cleared and closed down.
I'm working on a userform in excel 2003 and have hit a bit of a brick wall.
I have a listbox on a userform that shows only unique entries (customers) which are populated off sheet1 (called Names). On the sheet itself, there are customer entries repeated when there is more than one contact stored. I have the listbox working fine to show each customer only once.
My problems comes in here:
On the userform I have a textbox (this textbox in turn will determine specific contact details to be shown in other textboxes for the contact displayed) with a spinbutton that I want to show each contact for a customer (only showing one at a time and change made with spinbutton). I just can't get this to work properly...
I have following for change event in text boxes to only allow numerics e.g.
Private Sub txtGBP10_Change()
If (Not IsNumeric(txtGBP10.Value) And (txtGBP10.Value <> "")) Then
txtGBP10.Value = Left(txtGBP10.Value, Len(txtGBP10.Value) - 1)
End If
End Sub
Private Sub txtShare10_Change()
If (Not IsNumeric(txtShare10.Value) And (txtShare10.Value <> "")) Then
txtShare10.Value = Left(txtShare10.Value, Len(txtShare10.Value) - 1)
End If
End Sub
Can I add some code so that the user can only add numeric entries to 2 DP (txtGBP) or 3DP(txtShare)
Is there a way i could put a validation on a text box that doesn't allow the user to enter a value that already exists in a given range. The object being to avoid duplicate entries.
View 5 Replies View RelatedI am trying to do is extract the volume size of products in 'ml'
from 10k plus products from a description field cell.
this description field could also contain the weight of the product in grams
so I cannot just do a search for a numeric string ,
it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
I have a column of several thousand entries listed as numeric with a scientific symbol eg.
1.4mSv
19.53mSv/1mSv (some have a mix and or alpha/numeric range)
I want to convert them to the numeric value only. I'm extracting to a chart which is not recognising the alpha and throwing the data out. I tried find and replace, trying various options within the 'replace format' tab with no joy.
I have a few thousand products codes (i.e ABCD123BLA08 or SHU267BLA) They are non standardised in length or structure. I wish to pull out everything upto the end of the third numeric digit.( ie ABCD123 and SHU267) I cannot use left as they are all different lengths. Ideally i would serach for a non numeric char after the number then use left up to that point. Search can't do this, FIND can't do this.
Summary
ABCD123BLA08 would be ABCD123
SHU246BLU would be SHU246
I147ORT08-12 would be I147
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have a column that has cells with values as
19352510
C084111X AA
24253081
A001290U AA
19599291
48413321
I want to write an If Statement is a column next to each entry that denotes two options either Broker or Agent. Where the code is say 19352510 then Broker and where it is say C084111X AA then Agent.
Broker codes will never contain a letter. The Agent code will always start and finish with a letter.
I don't know if there is a setting I'm missing or I'm going mad but when I use the round function in VBA it doesn't round.
I am using Excel 2000. See the example attached.
In the cell A2 I have a value 0.525, cell B2 has a formula "=round(A2,2)" which = 0.53, but cell C2 is assigned via VBA ie
Sheet1.Cells(2, 3).Value = Round(Sheet1.Cells(2, 1).Value, 2)
and the result is 0.52??
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedWhat I need to do is sort certain entries in longer list (column A, it is in .csv format and needs to be in it so coordinates and names and ID, all sorted with commas) and I have another list (column C) which is shorter list of certain IDs. I googled and tried and got some results for the basic structure but the fuction seems to fail. It doesn't matter how I get that third list done, but there is only one criteria: since the list in column A is really long and those entries need to keep the .csv formatting, the function should copy that info what is in the matching cells.
Let me try to put it simple: .csv cells from column A that have matching ID from column C should be copied to column B (or N).
the function I'm working with right now is
=IF(ISERROR(FIND($C:$C; A1))=TRUE;"0";A1)