For the first grouping of data (Ex 1) I need to do the following; if the value in column J is less than 49 then delete the data in the corresponding row from column E to K. For the second grouping (Flx 1) if the value in column R is less than 49 then delete the data in the corresponding row from column M to S. I would like to be able to do this for all groups all the way to group Flx 5. All my sheets are set out in this way but I am not sure if I can do this using a formula or a macro (which I am not very experienced at writing).
I would like a macro that deletes rows based on having two blank cells in adjacent columns. I have achieved this with the following code however i need it to only delete rows below a certain row. How would i achieve this?
Sub DeleteBlankARows() Dim r As Long For r = Cells(Rows.Count, 30).End(xlUp).Row To 1 Step -1 If Cells(r, 3) = "" And Cells(r, 4) = "" Then Rows(r).Delete Next r End Sub
I'm working on a time sheet, and to make it easier to enter time i created a macro that sets the auto correct to correct a "." to a ":", but when the workbook closes i want to run a macro that deletes the auto correct rule.
I have 3 columns of data that are being copied from a .csv file. The data is pasted into Columns B, C, & D. Columns C and D are hidden. So that the user does not have to unhide the columns in order to delete the data, I would like to make it so that when the data in column B is deleted, the data in columns C and D is also deleted.
I have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top. The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F), Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That 1. puts the name of the sheet I am copying from in column A 2. the deadline date in Column B (that date is always in C10 of each worksheet) 3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet Dim DestSh As Worksheet 'worksheet in which to paste summary Dim Last As Long Dim CopyRow As Long 'row to copy Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1) End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I'm using this formula (in conditional formatting) to compare a cell with the previous cell (e.g. E11 compares to D11). If it is higher/ lower/the same, E11 is coloured accordingly.
However…. sometimes the data is not in D11 but C11 or B11. How do I tell excel to first of all look in D11 and only if the data is not there, to look in C11, then B11?
How to populate data in non-adjacent cells from information that is stored on another sheet. Sheet 1 is essentially setup to be visually pleasing to the user, but the data stored behind it is on another sheet stored in a more logical manner. I would like to auto-populate the nicely formatted sheet with information from sheet 2 when an item from a drop-down list is selected. I have found quite a few ways to do this using offset, etc. but in my case the values will be pulled into cells that are spread around the design sheet in no set order.
In column A, I have unit numbers. Column B is blank. I need help copying the unit number in Column A down in Column B until a new unit number appears in column A. For example, in A6 is unit LS2, A12 is unit LS24, A17 is unit LS34. I would like to be able to copy A6 into B6:B11, A12 into B12:B16, and A17 into B17:B22, etc.
I have the code to copy A6 in to B6 and down, but I don't know how to make it stop at A12. Attached is also an example.
I'm trying to find out the rule for de-duplicating data. I am removing duplicates based on an identification number in a data set of about 6000 records, including the duplicates (some records appear about 4 times). Due to the nature of the data I'm working with, there are only a handful of records that are "true" duplicates, i.e. some of the records appear 4 times but there is a difference in terms of location, etc and some are true duplicates in that there is no difference.
I need to know how Excel removes duplicates - does it only keep the first line that it finds for that identification number? Also, is there a way that I could create a rule for it to keep the record with the highest rate for example?
What I would like to do is to fill in B1:B3 with A0001 and B6:B9 with A0002. The number of rows in each set of data will vary, but the identifier (A000X) will always be located in the row in column B adjacent to the last entry for that set of data in column A and there will always be empty cells between data sets. The number of data sets will also vary.
I've got six columns with drop-down lists in every cell. I don't want column six to be selectable if the first five drop downs don't have data in them too.
Equally, I want the data in column six to be undone if columnns 1-5 are then unselected. Can I do this?
I know that using data validation or VBA is an option but I'm not sure exactly how to set it up this way. I also don't want anyone screwing with what can and can't be entered according to these rules - I want to keep it watertight!
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
If I have a list in sheet1, of say 300 names, I need some code, that for a table on sheet2, from A1 to F500 will delete the contents of cells in columns B C and D, IF the value for column A in that row is from the list in sheet1
List of names: sheet1, A1 to A300
Table that needs changing: sheet2, A1:F500
cells to be deleted in columns B C D IF value in A corresponds to the list in Sheet1
I have a VBA macro that deletes duplicates rows, however I would like to retain the information from the duplicate row, just before deleting it. For instance, If I have these two columns: ....
What is the fastest way to delete every cells that has data except for the first two rows?
I currently have this code but I find it a bit slow (and everything is replaced by column A to Z [which meets my need right now]).
Code: Sub delete() Application.ScreenUpdating = False lastrow = Activesheet.Cells(Rows.Count, "A").End(xlUp).Row Range("a3:z" & lastrow).delete End Sub
I have a worksheet with data in column A. However, there will always be blank cells throughout this column. I am looking for code that will delete the blank cells (so to speak) and move the below cell with data up one or however many blank cells precede it, hence deleted the blank cell. End result, column A will have no empty cells. The data contained within the cells will be both numerical and text.
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!). What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out. I have posted a link to an image which shows what I want. I hope I've explained it well enough!
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
I have got a set of data in a workbook with Sheet 1 range A1 to K373 and a range of data in Sheet 2 ranging from A1 to A30. What I will like to do is to have a VBA code to loop through all the cells in Sheet 1 column C and check which are the cells which value matches those in Sheet 2. Those that matches in Sheet 1 will have the entire row deleted. I have come out with the following codes but it does not work.
I am constantly editing this (we currently have over 100 accounts) and therefore the totals are changing.I have a formula for Total but I need formulas for the other two, based on when the cells in columns F and J are blank or have dates in them: For active, the total is the sum of all numbers in column M but only when there is a date in column F and a BLANK in column J. For yet to enter, the total is the sum of all the numbers in column M but only when both column F and column J are blank. At the moment, my accounts run from row 6 to row 142, with the first line of totals in row 145, however this is constantly expanding.
I have multiple sheets cataloging multiple vehicles' mileages in multiple areas (one sheet per month). I want to reorganize this data by Vehicle ID rather than month.
As per the attached file – I am trying to mark (with an X) the first 5 Adjacent cells which SUM up (and above) 480. As you will see, in some instants, one of the 3 formulas is correct. I am looking for a formula to work correct IN ALL situations. In Col. A I marked (light Blue Background) the FIRST 5 cells which meet the Condition. In Col. F are the sum results and those which meet the Condition are in Bold RED.
I have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
I need to have three rows link to each other. The first column cell A is a paste link and is always changing. The second B is a vlookup referenceing A and finding it in a changing table...the source for the paste link. C needs to follow the other two cells and remain "attached" to it. However, C has to be a cell that is hardcoded somewhere, meaning that C is not found in the source data and must be determined by a person. I have tried to link the sheets through vlookups and other formulas, however, this only works when the data is sorted and nothing new is added. I need a static sheet that can take in new values. I need to create some sort of relationship between the cells
