Macro Not To Run In Specific Range

Mar 5, 2014

I am using the below macro to delete row:

HTML Code: 

Sub REMOVE()
ActiveSheet.Unprotect Password:="P@ssw0rd!"
Set Rng = ActiveCell
ActiveCell.EntireRow.Delete
ActiveSheet.Protect Password:="P@ssw0rd!"
End Sub

However I would like not to apply that macro when I am in the row 12:26! btw, I am running my script by pressing CTRL+D.

Last thing would it also be possible to "extend" the exception to another range ? (name manager -> row 84:276 called "NEXT") if possible to define two name manager for the exception to implement to the existing macro.

View 1 Replies


ADVERTISEMENT

Run Macro In Specific Sheet Range?

Jun 16, 2014

I have my template workbook with sheet tab as following:

Summary/Report/Contact 1/Contact 2/Contact 3/Contact 4/Contact 5/Note/

And I have one macro to run and only want to run in the specific sheet as below:

Summary/Report/Contact 1/Contact 2/Contact 3/Contact 4/Contact 5/Note/

The sheet name for contact 1 to 5 is varies means it can be change to any name based on different job. How should I write my macro in order to do that with one macro?

View 5 Replies View Related

Macro To Clear Range In Specific Sheets

Apr 27, 2014

Looking to code a loop to go to sheets whose names begin with "day" and a number and clear a specific range. How would i code this without affecting the other sheets in the book?

View 3 Replies View Related

Macro To Produce List From Specific Range

Dec 2, 2009

I have a workbook with 2 worksheets, Sheet1 & Sheet2.
Sheet1 has a list of products on it, with a code, pack size and cost.

Sheet2 has got 8 columns in it.

The first column will be A , B , C

The second will be D, E, F

Third will be G, H, I

Going right through to column 8 which will be V, W X

In the second column in each on I will be have a (sell by date) So B, E, H, through to W will have sell by dates in them.

What I am looking for is a macro that will give me a list of short sell by dates when I click the button. So if today’s date is 02/12/09 when the button is clicked it will give me a list of all the product that have lets say a month sell by date left, I would like to be able to change the month to anything I want, just in case I want to do a longer check on the sell by date.

When it finds a short date I would like it to check against the code, so in the first column the code will be in A, it will match that code up against the code in Sheet1 and give me a list of the Code, and the Product from sheet1 and the sell by date that’s in Sheet2. The problem I have is when data is put into the second column on sheet2 which is D.E.F, I would want it just to check that column and not the A,B,C from column 1.

View 14 Replies View Related

Macro To Delete Specific Range Of Rows

Jul 12, 2014

I currently had to start from scratch as my formula kept raising the debug screen. I know the answer is simple but I cant figure out what it is. I have column A, rows 9 through 1000 with data. I want to delete the entire row of any "x" value present in column A rows 9 through 1000. I am new to VBA. So simple is good.

View 2 Replies View Related

Place Chart On Specific Range Macro

Aug 1, 2007

I'm working on an assignment that pulls information for different countries and I'd like to know how to go about placing the charts on a specific area. Any help would be greatly appreciated!

The concept:

With each click of a country, the country's information will be pulled from a 'data dump' that I created in the same file. The map and flag are also shown. Some of that information is just using lookups, or a combination of lookups and code, and the hardest part are the GRAPHS - which I'm having a really hard time placing and adjusting accordingly.

The problem:

As of now the charts are automatically filled as the user clicks a new country, but all of the charts are placed in weird locations, but I'd like for them to be placed in the specified ranges above.

I would like charts in the following ranges:

A20:B30 (Immigrant Group)
D20:E30 (Ethinc Group)
F20:G30 (Languages)
F13:G19 (Religion)
D10:E17 (Age structure)

This is the major part of my project that I need to complete. Any help would be greatly appreciated, PLEASE. =)

Right now I have ranges that aren't accurate, but regardless of how I try to show my range, the function does not work:

Sub CreateCharts()
Dim counter As Integer, chartname As String, xvals As String, offset As Integer, Range As String

'Delete all charts
Dim oc As ChartObject
For Each oc In ActiveWorkbook.ActiveSheet.ChartObjects
oc.Delete
Next oc

View 6 Replies View Related

Macro To Auto Hide Rows In Specific Range

Jun 10, 2014

I have the following macro to autohide some rows with no data, however its remove rows starting from column A.

[Code] .....

How do i fix this to only hide the rows in the range (H4:V50)?

View 5 Replies View Related

VBA Goal Seek Macro To Calculate Specific Range Only

Nov 20, 2008

Is there a way to use goal seek in VBA that won't trigger a full model calculation?

I would like to (somehow) perform goal seek, but only recalculate range("A1:B50") say on a single worksheet (where both the input value and the final calculated value is included in that range), as opposed to calculating the whole model inbetween each iteration.

Also, all dependencies between the input value and the final calculated result are contained in that range.

View 5 Replies View Related

Macro To Copy Range Hidden Paste In Specific Location

Mar 26, 2014

I have recorded the below macro and I am not very happy with it. enhance the macro and add the following:

I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.

I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.

HTML Code: 

Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub

View 1 Replies View Related

Search Specific Text In Column Range (Macro Or Formula)

Jun 30, 2014

I need a macro, or a formula that can identify if the words in the Words Column (Column A) is contained in Title Column (Column B). If it is, It displays as "Yes". If not, display as "No".

Case is not sensitive.

Words
Title
Displayed?

Christmas
Coworker has chronic hiccups
Yes

Excel
I Love Excel
Yes

Cartman
I Like Turtles
No

Ninja
Oh Christmas Tree
Yes

Tiger
Case of the Mondays
No

Chronic
Cute Monkeys
No

View 4 Replies View Related

Macro To Find Matching Text In A Range And Select Specific Cell

Oct 18, 2013

I have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.

Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.

This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)

Here are screenshots of what I am trying to accomplish. [URL] .......

View 3 Replies View Related

Specific Cells Populate With Specific Numbers When A Value Within A Range Is Entered

Oct 9, 2009

Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.

View 14 Replies View Related

For EACH Cell In Specific Range Meeting Specific Criteria - Call Sub

Jul 1, 2014

Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.

Code in plain english would look like this:

For EACH cell in range A1:BZ500 meeting the following criteria:

Cell value is a date

AND

Cell's date is at least a week or more in the future

AND

Cell background (Fill) = RGB color code: (R:191 G:191 B:191)

DO the following:

Call repeatingsub

View 11 Replies View Related

Macro Loop To Extract Specific Values And Min/Max Values From Column/Rows Range

Jun 3, 2009

Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.

There's 2 main events in this loop (I hope that's the correct terminology):

Input 1) User defines the beginning cell to start the loop. In this case, A2.

Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......

View 13 Replies View Related

Macro To Copy Specific Cells From Row From Source & Stop When Next Row Cell = Specific Value

Nov 7, 2008

I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)

After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.

Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.

Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select

View 9 Replies View Related

Find Specific Text In Cell That Matches Range Then Display Specific Text?

Aug 5, 2013

I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.

View 2 Replies View Related

Function To Sort A Range By The Values In A Specific Column And Return The Range

Mar 25, 2009

I was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.

My
Public Function SortRange(rngToSort As Range, valCol As Integer)
Dim Swapper As Variant
Dim i As Integer, _
j As Integer, _
k As Integer

For i = 1 To rngToSort.Rows.Count
For j = 1 To rngToSort.Rows.Count - i
If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then
For k = 1 To rngToSort.Columns.Count
Swapper = rngToSort(j, k)
rngToSort(j, k) = rngToSort(j + 1, k)
rngToSort(j + 1, k) = Swapper
Next k
End If
Next j
Next i
SortRange = rngToSort
End Function

View 9 Replies View Related

Generate Specific Range Of Unique Random From Main Range

Feb 9, 2014

How to create a sheet to generate Random numbers from 2 specific list of a main list range of 36 Numbers. (List A = Specific 15 numbers, List B = The remaining Numbers from these 36)

Example :

-The Main List Range is from Number 01 to 36
-The Specific random list will be 15 Numbers of these 36

List A-. The Specific 15 Numbers are: 01,02,03,10,11,12,13,20,21,22,23,30,31,32,33
List B-. Remaining Numbers : 04,05,06,07,08,09,14,15,16,17,18,19,24,25,26,27,28,29,34,35,36

So

I need to generate ONE Unique Random Numbers of List A ( 01,02,03,10,11,12,13,20,21,22,23,30,31,32,33)
In Cell A1
In Cell A2
In Cell A3

And from List B, (04,05,06,07,08,09,14,15,16,17,18,19,24,25,26,27,28,29,34,35,36)

I need to do the same thing In
Cell A4
Cell A5
Cell A6

It's possible to have a 6 cells with random but Unique Digits? (not repeated numbers between the 6 cell ??)

View 2 Replies View Related

Creating ActiveCell Range And Checking That Range For Specific Character?

Mar 14, 2013

I have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.

Teh StandHTML then gets used in the body of the email like other HTML items I use

The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.

Dim Myrange As Range
Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select
If Myrange = "x" Then
StandHTML = StandHTML & "Important Text"
End If

View 5 Replies View Related

SUM Of Values In 1 Range Based On Specific Criteria In Another Range

Jan 31, 2009

I am tracking total man hours of contractors in columns of different rates applicable. At present I have structured my worksheet with the different rates across and days going down. As I am invoiced for a period of work I will log the invoice ref number in a separate field. I would like to sum totals to report against $ Invoiced and $ Committed (i,e worked but not actually invoiced against yet).

Here is an example of what I am trying to achieve. The Actual showing sum mhrs * rate only for the mhrs entries with an invoice in corresponding Invoice Ref Column. The Committed producing sum of all mhrs * rate [which I am using =(SUM(D9:D37)*D7)] regardless of what is in invoice ref column.

This way I can hopefully track what we have been billed and also what we can expect to have to budget for to cover what has been worked but not billed against.

View 9 Replies View Related

MEDIAN, STDEV Of A Range IF Another Range = Specific Value

Apr 26, 2006

I want to get the MEDIAN of the values in F2:Q107 only if the value in D2:D107 = D111, how do I do this. I want to do the same thing with MEDIAN.

I don't want to use a pivot table if I can avoid it.

View 6 Replies View Related

Macro To Extract Data From Specific Column To New Sheets Specific Column?

Jun 14, 2013

I'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.

For instance, in Sheet1:

Chicken
Cow
Donkey
Pig

[Code]....

So the above table would be the result i'm aiming for.

NOTE, its not different workbooks. I'm looking for sheet to sheet macro.

I've attached a file as well if someone wants to have a go at it. There are no codes in it.

View 3 Replies View Related

Call Macro When Clicking In Specific Cell From Personal Macro Workbook

Aug 13, 2014

This is the code I use to call a macro when the macro Im calling is in the same workbook.

[Code].....

However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.

I also tried this code.

[Code] .....

View 2 Replies View Related

Running A Macro When A Value Is Reached In A Specific Cell Used To Call Up Macro

Jan 7, 2009

I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.

View 9 Replies View Related

Macro - Repeat Macro A Specific Number Of Times

Aug 22, 2008

I have created a macro that copies the outcome of a specific calculation (that is driven by random numbers) and pastes it (as values) into a seperate table. It then recalculates the sheet, copies the new outcome and pastes it into the same table at a row beneath the previous one.

However, I would like to be able to determine how many times this loop is repeated (i.e. how many rows of outcomes will be generated) without having to change the macro each time. Is this possible? Maybe by just linking it to a cell where the number of outcomes/repeats is specified.

View 9 Replies View Related

Get Max Value Of Specific Range?

Jun 19, 2013

i want to get the max value of a specific range. see below, exs. max value "from speed" coloumn - if values between 250-300 in coloumn "direction"

Speed
Direction

0.13
348.94

0.03
344.34

[Code] ...........

View 9 Replies View Related

Search For A Value In A Specific Range?

Dec 21, 2013

I want to search for a value, in a specific range (in this case, in a row). If that value exists, l want the formula to return that value, otherwise l want it to return "FALSE" or whatever.

The formula must exist in one discrete cell only, i.e. the output will be contained in only one cell.I don't want to match the occurrence of that value with another row's cell. I don't want to search for multiple values (although if you have a way to do that, l'll be interested to know!), l don't want to count the number of times the value occurs.All l want is to return that value if it exists in the specified range of cells, and if it doesn't, l want to say "FALSE" or something.

View 7 Replies View Related

Selecting Specific Value Within A Range

Nov 12, 2008

I have a spreadsheet with Employee details and each employee has a Indicator and a Score.
I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee.

If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....

View 6 Replies View Related

Use Specific Range In For Loop

Feb 13, 2009

I have an excel sheet with set ranges in it. I would like to refer to these ranges in my code, but i am doing something wrong. Here is a portion of the code. The range name is 'Status'

View 4 Replies View Related

Search A Range For Specific Value

May 3, 2014

I need to look through a range for a specific value. When I find it if the nearby time column matches a specific time I want to retrieve the lookup value. Because I am not very macro savvy, and the spreadsheet has to run on both mac and pc I do not want to use a macro. Can I do this with an IF((AND combination or is there a better way? If there is a way to look through a range with IF, how would I structure the criteria to look through an entire column for the value? Lookup won't work because the value can occur several times through out the range, but only once with a specific time value.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved