I have a macro which downloads data from website. But takes some more time to complete a work. I want that a time should display at the bottom bar of excel where "Ready" is written. THe time should be in hh.mm.ss format.
View 9 Replies
how to include a line of code, to start a sub running at a selected time? Given that the workbook is already opened before that time?
View 6 Replies View RelatedI have a macro that would run once the workbook is opened. This macro would then open another excel file to get updates then close it. Now this file is also being accessed by other persons in the network but just for a split second. Since an opened file would result into an error, what proper codes should I add so that if the file is currently in use, the macro would then run again after 5 seconds and would do the same thing until the file is ready? This is what I have so far. All in the standard module.
Sub Updater()
Dim updatePath As String
updatePath = Worksheets("Entries"). Range("E104")
Application. ScreenUpdating = False
Workbooks.Open (updatePath)
On Error Goto Errorhandler
Workbooks("APTupdater.xls").Close True
Application.ScreenUpdating = True
Exit Sub
Errorhandler:................
I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?
View 11 Replies View RelatedI want to know if I can schedule a macro to run at specific times?
If so would 6 requests at the same time slow excel down?
I wanted to run a macro at 08:00 each day. I tested the macro would auto start and run, and set the test to start at 13:00.
In the Private module of the Workbook I put
Private Sub Workbook_Open()
Application .OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
and in a standard module
Sub TestTimeMacro()
Application.OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
Initially I had the TimeValue set as 13:00:00. The test worked OK so I changed the timevalue to 08:00:00.
The macro now runs at 08:00 and 13:00.
How do I stop the 13:00 event?
I have macro running with time application. when msgbox pops up, excel tab on windows taskbar should flashes, but it doesn't.When switch to excel, didn't even see the msgbox until I click on any cell.
View 9 Replies View RelatedI am getting a run time error 1004 when i am running this macro. I got this macro to my earlier thread. As i am a beginner in a macro, I am unable to identify the problem. I have attached the workbook for the same
View 5 Replies View RelatedI'm opening a workbook and then running the macro in the workbook. The problem is I would like to build a "timeout" feature if the macro is running too long (as some of the macro's this will run can take days to complete) but I don't know how to run the macro asynchronously. Also I need to know if i can get it to run asynchronous is there an event that will tell me when the process is finished. The calling application of the macro is written in VB6 and opening excel workbooks to run the macros out of. also the "timeout" feature must be done from the VB6 application it cannot be edited into the the workbooks containing the macro.
View 6 Replies View Relatedis it possible to show progress indicator if macro execution take some considerable time say more than 10 seconds?
View 2 Replies View RelatedI have a couple of functions running in my workbook, and for no reason that I can see, when one of them runs during a simple macro I use to show/hide some columns, the worksheet vanishes. Is there a way to stop all functions running while I show/hide columns?
View 5 Replies View RelatedFormula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View RelatedI want to zero out or blank out my running balance in the columns where I do not have an amount entered. So instead of having my running balance total run all the way down the spreadsheet, I want it to be blank at the first cell where I have not entered in a new bill. I have attached an example of what I am trying to do.
View 2 Replies View RelatedHere is the image 1 after selecting one of element in listbox and then if I click delete material (commandbutton).
It has to delete the select material in sheet 2 and has to cut the element below and move to 1 row above as shown in figure 2.
At the same time it has to delete the entire respective column and remaining column has to be cut and place in column before in sheet 3 as shown in figure 3
For that I had wrote the program which is below
Private Sub CommandButton5_Click()
Dim i, j, k, m, n As Integer
i = ListBox1.ListIndex
j = Sheet2.Cells(1, 39).Value
k = j - i
[Code] ....
When I click the delete commandbutton5 the result is as shown in figure below
In sheet2
In sheet 3
For loop is running only one time after that it got terminated. If I split the 1st for loop and execute it.it is running nice what I meant to do. If I combine another for loop or If I add msgbox at top it misbehaving. I tried with do while loop also it also doing same thing.
Create a cell with running time in Hours, Minutes, and seconds, in 12:00:00 AM format.
View 13 Replies View RelatedI have a module which runs behind a command button which creates a table and outputs it to an excel workbook. Is it possible to cause this module to execute at a specified time, say 9.00 pm or when the database is closed. It is not necessarily the case that the database is closed every day.
View 9 Replies View RelatedHere is the code for my user form.
Private Sub UserForm_Initialize()
TextBoxDate.Value = Now
TextBoxDate = Format(TextBoxDate.Value, "dd mmmm yyyy hh:mm:ss")
End Sub
This is a form to have employees punch in/out. The form is designed to be running all the time. The TextboxDate is disableed so the user can not change it.
I would like to know if it is possible to get the time to be displayed on the form constantly? Right now it only updates when the OK button is pressed on the form.
Need running clock in Excel... in A1 I have put running clock which is taking current system time. However, I want to add running clocks for EST in B1 - CST in C1 and PST in D1.
VB code I used to display current system running clock
Global clockOn As Boolean
Sub runClock()
Range("A1").Value = Now()
If clockOn = True Then
[Code] ......
Attached File : Time.xlsm
I wrote a macro that worked for a long time but now a running time error (9) popped out even though the code didn't change at all. If I run the same macro on the same computer but logged on as a different user it runs smoothly. Tried it in other computers and in some of them it will also run in only some of the users but not all.
I'm running Excel 2003 on windows XP, on a pentium 4 PC but found the same in othe computers running Vista.
When I click the debug button the highlighted line is
Workbooks("Detrend").Activate
close to the end of the following code.
1- Open enclosed file.
2- Run Macro1.
3- Wait some time completing running Macro1.
4- Run Macro2.
5- Wait some time completing running Macro2.
6- Look MessageBox to see that what is Macro2 running time. (Note: My Macro2 running time is 06 minutes and 49 seconds)
My question is how can I decrease Macro2 running time ?
I am open all ideas like copy data to NotePad and paste again excel etc.
I have a user form that builds a workbook from one template sheet and information in a SQL Server database. The template sheet contains 4 charts that are copied to every new sheet in the workbook, then their data ranges are set through VBA code. For a while the code was working wonderfully. All the necessary sheets were being generated and correctly populated.
Yesterday I added a new module to generate another sheet and pull data from the same SQL Server tables. Now if I run the userform it will work fine once and create all the needed sheets, and set all the charts to the proper ranges. However, if I delete all the created sheets and run the form again, I get:
Runtime Error '-2147417848 (80010108)'
Automation Error
The Object Invoked has disconnected from its clients
The error consistantly occurs for the following line of Selection.Copy Destination:=Worksheets("Master").Range("D1")
After the error the selected range still shows up as surrounded by a selection box, but if I change sheets, the box moves to the new sheet. Also I cannot select any new cells in the work book. In order to get Excel to work again I have to End Task from the Task Manager just to get it to close. When I restart Excel and go back to my work book I get the same results, i.e. The form works great once, then Excel dies.
I have tried qualifing all of the objects that can be qualified. I have tried setting all possible varriables to Nothing before exiting my macros. Nothing I have tried, or found suggested so far in the forum works.
I have created a software on a userform and have copied contents of this userform to worksheet cells. However when I run it for the first time everything works and all contents goes in C4 - C8. However when I run it for the second time the contents in C4 - C8 deletes itself and new data appear i.e. the cells are overwritten.
In cell C3 i have the date and I have managed to put this date in the next empty column everytime the software is run. I do not understand why the dates can go to the next empty column without it being over written but cells C4 - C8 cant!
Does any one know how I can resolve the calculation error that shows up in a pivot table when you select "show data as a running total in" option and you end up with a very small difference error.
In other words if I add 12.96 + 2.04 + (-15) and you get 1.455E-11 instead of zero. When these calculation errors show up in normal spreadsheet calculations outside of pivot table you can always use the ROUND function to correct these arbitrary calculation errors.
I'm looking for a recommendion for handling this in a pivot table where I have a couple of hundred columns of data that are using the "running total in" option.
Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
I'm having trouble at getting the overall fastest time to show up. There are tree racers in two heats. Also the times are set up like 0;00.000 because i cant get it to work like MM:SS:MS .
Daytona GTR34.xlsx
Basically each line signifies a date & time that a deposit was placed and a date & time that a withdrawal was actioned. My goal is to be able to determine what kind of average response time we have between the time a withdrawal was requested and the time a withdrawal was actioned.
View 2 Replies View RelatedI have an excel spreadsheet that has about 40,000 rows....and about 30 columns across. The two columns I'm writing this about is column "PO#" and column titled "VALUE". The PO# column will have a number such as 4500234567...and the value column will have the cost of the PO#, for example $5,000.
Now within the the spreadsheet the PO# number and value will be listed multiple times....and there are hundreds of PO#'s listed, with its value.
I would like to perform some kind of filter on a seperate worksheet (? or whatever i needed) that would show the PO# number and value once.
I need a MsgBox to show one time for five seconds, and not repeat.
Here is a sample of where I'm at. But this code repeats.
Public Sub timebox()
MsgBox "Let Me See You Work"
Application.OnTime When:=Now + TimeValue("00:00:05"), Name:="timebox"
End Sub
I am trying to create a spreadsheet that will show vacation time; accrued, taken, leftover. There are different accrual rates for years of service, and caps on carryover.
I have been trying to figure this out, however the accruals for employees over 1 year are higher than they should be.
Breakdowns are as follows:
1-2 years - 1 week vacation - 40 hours eligible for carryover each year
3-4 years - 2 weeks vacation - 80 hours eligible for carryover each year
5-9 years - 3 weeks vacation - 120 hours eligible for carryover each year
10+ year - 4 weeks vacation - 160 hours eligible for carryover each year
