Running A Macro At A Specific Time

Jun 5, 2009

I want to know if I can schedule a macro to run at specific times?

If so would 6 requests at the same time slow excel down?

View 6 Replies


ADVERTISEMENT

Running Module At Specific Time

Jun 24, 2006

I have a module which runs behind a command button which creates a table and outputs it to an excel workbook. Is it possible to cause this module to execute at a specified time, say 9.00 pm or when the database is closed. It is not necessarily the case that the database is closed every day.

View 9 Replies View Related

Run Macro Time: Start A Sub Running At A Selected Time

May 23, 2007

how to include a line of code, to start a sub running at a selected time? Given that the workbook is already opened before that time?

View 6 Replies View Related

Running A Macro When A Value Is Reached In A Specific Cell Used To Call Up Macro

Jan 7, 2009

I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.

View 9 Replies View Related

Running Macro After A Specified Time

Sep 14, 2006

I have a macro that would run once the workbook is opened. This macro would then open another excel file to get updates then close it. Now this file is also being accessed by other persons in the network but just for a split second. Since an opened file would result into an error, what proper codes should I add so that if the file is currently in use, the macro would then run again after 5 seconds and would do the same thing until the file is ready? This is what I have so far. All in the standard module.

Sub Updater()
Dim updatePath As String
updatePath = Worksheets("Entries"). Range("E104")
Application. ScreenUpdating = False
Workbooks.Open (updatePath)
On Error Goto Errorhandler
Workbooks("APTupdater.xls").Close True
Application.ScreenUpdating = True
Exit Sub

Errorhandler:................

View 3 Replies View Related

Macro Only Running One Cell At A Time

Mar 25, 2014

I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?

View 11 Replies View Related

Show Time Of Running Macro

Jul 9, 2007

I have a macro which downloads data from website. But takes some more time to complete a work. I want that a time should display at the bottom bar of excel where "Ready" is written. THe time should be in hh.mm.ss format.

View 9 Replies View Related

Can't Stop Macro Running At Set Time

Apr 28, 2006

I wanted to run a macro at 08:00 each day. I tested the macro would auto start and run, and set the test to start at 13:00.

In the Private module of the Workbook I put

Private Sub Workbook_Open()
Application .OnTime TimeValue("08:00:00"), "MyMacro"
End Sub

and in a standard module

Sub TestTimeMacro()
Application.OnTime TimeValue("08:00:00"), "MyMacro"
End Sub

Initially I had the TimeValue set as 13:00:00. The test worked OK so I changed the timevalue to 08:00:00.

The macro now runs at 08:00 and 13:00.

How do I stop the 13:00 event?

View 3 Replies View Related

Macro Running With Time Application Is Not Flashing?

Jun 6, 2014

I have macro running with time application. when msgbox pops up, excel tab on windows taskbar should flashes, but it doesn't.When switch to excel, didn't even see the msgbox until I click on any cell.

View 9 Replies View Related

Getting Run Time Error 1004 When I Am Running This Macro

Aug 26, 2009

I am getting a run time error 1004 when i am running this macro. I got this macro to my earlier thread. As i am a beginner in a macro, I am unable to identify the problem. I have attached the workbook for the same

View 5 Replies View Related

Stop Macro Running After Specfied Time Period

Oct 17, 2007

I'm opening a workbook and then running the macro in the workbook. The problem is I would like to build a "timeout" feature if the macro is running too long (as some of the macro's this will run can take days to complete) but I don't know how to run the macro asynchronously. Also I need to know if i can get it to run asynchronous is there an event that will tell me when the process is finished. The calling application of the macro is written in VB6 and opening excel workbooks to run the macros out of. also the "timeout" feature must be done from the VB6 application it cannot be edited into the the workbooks containing the macro.

View 6 Replies View Related

Running A Specific Maro Through The Combobox Feature When A Specific Word Is Chosen

Apr 21, 2006

I am trying to run a macro once a particular word shows up in the combo box. now in my chase i could try to use VBA code to run the macros such that once the arrow is used in the combobox to select a certain word a particular macro labled the same name as the word chosen would run.

View 5 Replies View Related

Different Country Time: Reflect The India Time After Pressing A Specific Key In A Specific Cell

Mar 3, 2007

I am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.

View 3 Replies View Related

Macro At Specific Time And Day?

Sep 18, 2012

I want to run a macro at a specific time and day. For exemple the macro needs to be run every Friday at noon.

Also, I don't want to worry about opening the file all the time.

View 3 Replies View Related

Macro Automatic Printout Worksheets Daily At A Specific Time

Feb 2, 2007

Need Macro to automatically printout my worksheets daily at a specifi time?

View 9 Replies View Related

Running Code On Specific Worksheets

Dec 4, 2009

Let's say I have 6 Worksheets in my Workbook with the following names:

Sheeta1
Sheeta2
Sheeta3
Sheetb1
Sheetb2
Sheetb3

And I have three Subs that I want to run, one Sub for two specific Worksheets.

How could I code my Subs so that the first Sub runs on Sheeta1 and Sheetb1, the second Sub runs on Sheeta2 and Sheetb2, and the last Sub runs on Sheeta3 and Sheetb3?

As you can see, the 1, 2 and 3 in the Worksheet names are what links the Subs to the Worksheet.

View 9 Replies View Related

Summarizing Times For Specific Items Within Specific Time-frame

Mar 26, 2014

I got Excel for Mac 2011 installed. I have a table called 'Raw" that holds data from the beginning until the end of 2013 (in total ~7000 rows). I have columns for Category, Start and End time, and time period in Hours, Minutes, and Seconds:

Code:
A
B
C
D
E
F

Category
Start
End
Hours
Minutes
Seconds

Transportation
2013/01/01 01:00:00
2013/01/01 01:15:00
0:15:00
15:00
900

[Code] ...........

I'm trying to get an overview of how much time I've spent in January on Transportation. I would need to look at the Category entries for Transportation, then only use the ones which have the Start set to 2013/01, and then take the Hours/Minutes/Seconds, and summarise it in a new table called 'Data':

Code:
A
B
C
D
E
F

Month
Category
Occurrence
Hours
Minutes
Seconds

2013/01
Transportation
48

[Code] .......

I have figured out a way to count the occurrences for Transportation for January:

=COUNTIFS(Raw!B:B,">="&"2013/01/01 00:00:00"+0,Raw!B:B,"

View 1 Replies View Related

For Next Loop Running Only One Time

Feb 22, 2014

Here is the image 1 after selecting one of element in listbox and then if I click delete material (commandbutton).

It has to delete the select material in sheet 2 and has to cut the element below and move to 1 row above as shown in figure 2.

At the same time it has to delete the entire respective column and remaining column has to be cut and place in column before in sheet 3 as shown in figure 3

For that I had wrote the program which is below

Private Sub CommandButton5_Click()
Dim i, j, k, m, n As Integer
i = ListBox1.ListIndex
j = Sheet2.Cells(1, 39).Value
k = j - i

[Code] ....

When I click the delete commandbutton5 the result is as shown in figure below

In sheet2

In sheet 3

For loop is running only one time after that it got terminated. If I split the 1st for loop and execute it.it is running nice what I meant to do. If I combine another for loop or If I add msgbox at top it misbehaving. I tried with do while loop also it also doing same thing.

View 1 Replies View Related

With Each New Entry In 2 Cells I Would Like A Running Balance In A Specific Cell

Jun 5, 2007

I have a cell B6 which I would like the amount to change with each entry I make. I have B4 which has constant amount, B8-B40 will have new entries and D8-D40 new entries. I had a function that had number 1 B8:B40 number 2 -D8:40 number 3 +B4. the function total in grey box is correct but when I press enter the cell in B6 says value and doesn't change to correct amount. Basically I have a balance in B6 that I want to change auomaticlly when I enter data in B8,D8 one day, then the next day, which B9, D9, etc..

View 5 Replies View Related

Creating A Cell With Running Time

Oct 2, 2007

Create a cell with running time in Hours, Minutes, and seconds, in 12:00:00 AM format.

View 13 Replies View Related

Running Date And Time On Userform

May 30, 2007

Here is the code for my user form.

Private Sub UserForm_Initialize()

TextBoxDate.Value = Now
TextBoxDate = Format(TextBoxDate.Value, "dd mmmm yyyy hh:mm:ss")

End Sub

This is a form to have employees punch in/out. The form is designed to be running all the time. The TextboxDate is disableed so the user can not change it.

I would like to know if it is possible to get the time to be displayed on the form constantly? Right now it only updates when the OK button is pressed on the form.

View 9 Replies View Related

IF Function To Compare Specific Time To Time In Cell

Nov 19, 2008

I am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be:

=((I12/100)*25)/D12

After 1pm I would like the formula to be

=((I12/100)*25)/B12

I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().

View 6 Replies View Related

Running Clock In Excel With Different Time Zone

Nov 28, 2013

Need running clock in Excel... in A1 I have put running clock which is taking current system time. However, I want to add running clocks for EST in B1 - CST in C1 and PST in D1.

VB code I used to display current system running clock

Global clockOn As Boolean
Sub runClock()
Range("A1").Value = Now()
If clockOn = True Then

[Code] ......

Attached File : Time.xlsm‎

View 3 Replies View Related

User Dependent Running Time Errror (9)

Mar 3, 2009

I wrote a macro that worked for a long time but now a running time error (9) popped out even though the code didn't change at all. If I run the same macro on the same computer but logged on as a different user it runs smoothly. Tried it in other computers and in some of them it will also run in only some of the users but not all.

I'm running Excel 2003 on windows XP, on a pentium 4 PC but found the same in othe computers running Vista.

When I click the debug button the highlighted line is
Workbooks("Detrend").Activate
close to the end of the following code.

View 10 Replies View Related

Decrease Macro1 Running Time (Copy And Paste Values)

Aug 20, 2014

1- Open enclosed file.
2- Run Macro1.
3- Wait some time completing running Macro1.
4- Run Macro2.
5- Wait some time completing running Macro2.
6- Look MessageBox to see that what is Macro2 running time. (Note: My Macro2 running time is 06 minutes and 49 seconds)

My question is how can I decrease Macro2 running time ?

I am open all ideas like copy data to NotePad and paste again excel etc.

View 3 Replies View Related

Runtime Error -2147417848 Running User Form A Second Time

Mar 28, 2007

I have a user form that builds a workbook from one template sheet and information in a SQL Server database. The template sheet contains 4 charts that are copied to every new sheet in the workbook, then their data ranges are set through VBA code. For a while the code was working wonderfully. All the necessary sheets were being generated and correctly populated.

Yesterday I added a new module to generate another sheet and pull data from the same SQL Server tables. Now if I run the userform it will work fine once and create all the needed sheets, and set all the charts to the proper ranges. However, if I delete all the created sheets and run the form again, I get:

Runtime Error '-2147417848 (80010108)'

Automation Error
The Object Invoked has disconnected from its clients

The error consistantly occurs for the following line of Selection.Copy Destination:=Worksheets("Master").Range("D1")

After the error the selected range still shows up as surrounded by a selection box, but if I change sheets, the box moves to the new sheet. Also I cannot select any new cells in the work book. In order to get Excel to work again I have to End Task from the Task Manager just to get it to close. When I restart Excel and go back to my work book I get the same results, i.e. The form works great once, then Excel dies.

I have tried qualifing all of the objects that can be qualified. I have tried setting all possible varriables to Nothing before exiting my macros. Nothing I have tried, or found suggested so far in the forum works.

View 9 Replies View Related

Coping Userform To Worksheet Cells And Running Multiple Time Without OVERWIRTE

Feb 13, 2014

I have created a software on a userform and have copied contents of this userform to worksheet cells. However when I run it for the first time everything works and all contents goes in C4 - C8. However when I run it for the second time the contents in C4 - C8 deletes itself and new data appear i.e. the cells are overwritten.

In cell C3 i have the date and I have managed to put this date in the next empty column everytime the software is run. I do not understand why the dates can go to the next empty column without it being over written but cells C4 - C8 cant!

View 3 Replies View Related

Macro Stops Running The Macro Completely And Hangs In The Middle

Jul 3, 2007

Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.

They are four PC's along with our Managers laptop that run this Macro daily.

About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.

We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.

I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.

I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.

View 9 Replies View Related

Macro To Copy Specific Cells From Row From Source & Stop When Next Row Cell = Specific Value

Nov 7, 2008

I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)

After that then start all over again unless the next rows cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.

Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.

Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select

View 9 Replies View Related

Running A Macro

Dec 19, 2006

Can i run a macro by just the pointer going over it.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved