Running Module At Specific Time
Jun 24, 2006
I have a module which runs behind a command button which creates a table and outputs it to an excel workbook. Is it possible to cause this module to execute at a specified time, say 9.00 pm or when the database is closed. It is not necessarily the case that the database is closed every day.
View 9 Replies
ADVERTISEMENT
Jun 5, 2009
I want to know if I can schedule a macro to run at specific times?
If so would 6 requests at the same time slow excel down?
View 6 Replies
View Related
Aug 18, 2004
I recieve an error :
Run-time error '50289':
Can't perform operation since the project is protected.
When i try and run my code.
The code does add parts to modules and workbook events, but I need the code to be protected.
View 9 Replies
View Related
Mar 13, 2012
I have a workbook which I regularly upload that cannot have macros within it; however, to update and process the data, I must utilize VBA Code.
I tried to work around this by storing my macros in a module in another workbook. My process is to have the VBA Code Module from the other workbook open and have the active workbook be the one I want to change, then I run the VBA Code from the other workbook.
This used to work. However, I am recently getting problems with the Code not running correctly. Sometimes it only runs the code if the affected cells are not hidden; other times it will not run the code at all!
View 4 Replies
View Related
Apr 21, 2006
I am trying to run a macro once a particular word shows up in the combo box. now in my chase i could try to use VBA code to run the macros such that once the arrow is used in the combobox to select a certain word a particular macro labled the same name as the word chosen would run.
View 5 Replies
View Related
Mar 3, 2007
I am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.
View 3 Replies
View Related
May 27, 2009
I have a workbook that has 2 similar worksheets. One called "Wood Shafts" and the other called "Iron Shafts" I have the macros worked out for the sheet called "Wood Shafts" and I just realised I need to apply similar Macros to the sheet called "Iron Shafts" (same functions but different values from different columns). Some how I need the code to be able to tell the difference between the two sheets. I am at a loss.
View 4 Replies
View Related
May 23, 2007
how to include a line of code, to start a sub running at a selected time? Given that the workbook is already opened before that time?
View 6 Replies
View Related
Nov 19, 2008
i am running a macro thru vba (beiing called from a ms access module) and am getting a RuntTimeError 1004.
the code opens a workbook...then open a second workbook (which houses the macro) then activates the desired worksheet and call the Maco via the run command but errors out.
if i open the workbook and set focus on the desired sheet ....tool>macro>desired macro name it runs fine.
the line of code in the macro is: "ActiveCell.Offset(1, 0).Activate"
View 9 Replies
View Related
Dec 4, 2009
Let's say I have 6 Worksheets in my Workbook with the following names:
Sheeta1
Sheeta2
Sheeta3
Sheetb1
Sheetb2
Sheetb3
And I have three Subs that I want to run, one Sub for two specific Worksheets.
How could I code my Subs so that the first Sub runs on Sheeta1 and Sheetb1, the second Sub runs on Sheeta2 and Sheetb2, and the last Sub runs on Sheeta3 and Sheetb3?
As you can see, the 1, 2 and 3 in the Worksheet names are what links the Subs to the Worksheet.
View 9 Replies
View Related
Mar 27, 2009
After all the awesome macros I've obtained with the help of all of you, I now have over 30 macros, each in its own module. I have tried without success to re-name the modules with no luck. How is everyone organizing these?
View 2 Replies
View Related
Mar 26, 2014
I got Excel for Mac 2011 installed. I have a table called 'Raw" that holds data from the beginning until the end of 2013 (in total ~7000 rows). I have columns for Category, Start and End time, and time period in Hours, Minutes, and Seconds:
Code:
A
B
C
D
E
F
Category
Start
End
Hours
Minutes
Seconds
Transportation
2013/01/01 01:00:00
2013/01/01 01:15:00
0:15:00
15:00
900
[Code] ...........
I'm trying to get an overview of how much time I've spent in January on Transportation. I would need to look at the Category entries for Transportation, then only use the ones which have the Start set to 2013/01, and then take the Hours/Minutes/Seconds, and summarise it in a new table called 'Data':
Code:
A
B
C
D
E
F
Month
Category
Occurrence
Hours
Minutes
Seconds
2013/01
Transportation
48
[Code] .......
I have figured out a way to count the occurrences for Transportation for January:
=COUNTIFS(Raw!B:B,">="&"2013/01/01 00:00:00"+0,Raw!B:B,"
View 1 Replies
View Related
Feb 22, 2014
Here is the image 1 after selecting one of element in listbox and then if I click delete material (commandbutton).
It has to delete the select material in sheet 2 and has to cut the element below and move to 1 row above as shown in figure 2.
At the same time it has to delete the entire respective column and remaining column has to be cut and place in column before in sheet 3 as shown in figure 3
For that I had wrote the program which is below
Private Sub CommandButton5_Click()
Dim i, j, k, m, n As Integer
i = ListBox1.ListIndex
j = Sheet2.Cells(1, 39).Value
k = j - i
[Code] ....
When I click the delete commandbutton5 the result is as shown in figure below
In sheet2
In sheet 3
For loop is running only one time after that it got terminated. If I split the 1st for loop and execute it.it is running nice what I meant to do. If I combine another for loop or If I add msgbox at top it misbehaving. I tried with do while loop also it also doing same thing.
View 1 Replies
View Related
Sep 14, 2006
I have a macro that would run once the workbook is opened. This macro would then open another excel file to get updates then close it. Now this file is also being accessed by other persons in the network but just for a split second. Since an opened file would result into an error, what proper codes should I add so that if the file is currently in use, the macro would then run again after 5 seconds and would do the same thing until the file is ready? This is what I have so far. All in the standard module.
Sub Updater()
Dim updatePath As String
updatePath = Worksheets("Entries"). Range("E104")
Application. ScreenUpdating = False
Workbooks.Open (updatePath)
On Error Goto Errorhandler
Workbooks("APTupdater.xls").Close True
Application.ScreenUpdating = True
Exit Sub
Errorhandler:................
View 3 Replies
View Related
Jun 5, 2007
I have a cell B6 which I would like the amount to change with each entry I make. I have B4 which has constant amount, B8-B40 will have new entries and D8-D40 new entries. I had a function that had number 1 B8:B40 number 2 -D8:40 number 3 +B4. the function total in grey box is correct but when I press enter the cell in B6 says value and doesn't change to correct amount. Basically I have a balance in B6 that I want to change auomaticlly when I enter data in B8,D8 one day, then the next day, which B9, D9, etc..
View 5 Replies
View Related
Jan 24, 2013
Let's say i have 2 Modules on my VBA forms, is it possible to Copy all the Codes in Module 1 and Paste it to Module 2 by using a Command Button?
View 1 Replies
View Related
Jan 19, 2012
i got a question how i can make a msgbox in one module with 'Yes' linking to a different module.
such as: this is located in module2
Code:
If MsgBox("Do you want to activate module1?" & vbCr & _
"" _
, vbYesNo, "Choose") = vbNo Then Exit Sub
i want that vbYesNo different
No as in Exit Sub
yes as in activate Module1
View 5 Replies
View Related
Mar 25, 2014
I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?
View 11 Replies
View Related
Oct 2, 2007
Create a cell with running time in Hours, Minutes, and seconds, in 12:00:00 AM format.
View 13 Replies
View Related
Jul 9, 2007
I have a macro which downloads data from website. But takes some more time to complete a work. I want that a time should display at the bottom bar of excel where "Ready" is written. THe time should be in hh.mm.ss format.
View 9 Replies
View Related
Apr 28, 2006
I wanted to run a macro at 08:00 each day. I tested the macro would auto start and run, and set the test to start at 13:00.
In the Private module of the Workbook I put
Private Sub Workbook_Open()
Application .OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
and in a standard module
Sub TestTimeMacro()
Application.OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
Initially I had the TimeValue set as 13:00:00. The test worked OK so I changed the timevalue to 08:00:00.
The macro now runs at 08:00 and 13:00.
How do I stop the 13:00 event?
View 3 Replies
View Related
May 30, 2007
Here is the code for my user form.
Private Sub UserForm_Initialize()
TextBoxDate.Value = Now
TextBoxDate = Format(TextBoxDate.Value, "dd mmmm yyyy hh:mm:ss")
End Sub
This is a form to have employees punch in/out. The form is designed to be running all the time. The TextboxDate is disableed so the user can not change it.
I would like to know if it is possible to get the time to be displayed on the form constantly? Right now it only updates when the OK button is pressed on the form.
View 9 Replies
View Related
Nov 19, 2008
I am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be:
=((I12/100)*25)/D12
After 1pm I would like the formula to be
=((I12/100)*25)/B12
I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().
View 6 Replies
View Related
Nov 28, 2013
Need running clock in Excel... in A1 I have put running clock which is taking current system time. However, I want to add running clocks for EST in B1 - CST in C1 and PST in D1.
VB code I used to display current system running clock
Global clockOn As Boolean
Sub runClock()
Range("A1").Value = Now()
If clockOn = True Then
[Code] ......
Attached File : Time.xlsm
View 3 Replies
View Related
Jun 6, 2014
I have macro running with time application. when msgbox pops up, excel tab on windows taskbar should flashes, but it doesn't.When switch to excel, didn't even see the msgbox until I click on any cell.
View 9 Replies
View Related
Mar 3, 2009
I wrote a macro that worked for a long time but now a running time error (9) popped out even though the code didn't change at all. If I run the same macro on the same computer but logged on as a different user it runs smoothly. Tried it in other computers and in some of them it will also run in only some of the users but not all.
I'm running Excel 2003 on windows XP, on a pentium 4 PC but found the same in othe computers running Vista.
When I click the debug button the highlighted line is
Workbooks("Detrend").Activate
close to the end of the following code.
View 10 Replies
View Related
Aug 26, 2009
I am getting a run time error 1004 when i am running this macro. I got this macro to my earlier thread. As i am a beginner in a macro, I am unable to identify the problem. I have attached the workbook for the same
View 5 Replies
View Related
Oct 17, 2007
I'm opening a workbook and then running the macro in the workbook. The problem is I would like to build a "timeout" feature if the macro is running too long (as some of the macro's this will run can take days to complete) but I don't know how to run the macro asynchronously. Also I need to know if i can get it to run asynchronous is there an event that will tell me when the process is finished. The calling application of the macro is written in VB6 and opening excel workbooks to run the macros out of. also the "timeout" feature must be done from the VB6 application it cannot be edited into the the workbooks containing the macro.
View 6 Replies
View Related
Oct 25, 2011
What i have at the moment is a module that contains code where i call a different module that i use as a procedure.
Module1
Code:
If Sheet1.Range("C4").Value < Sheet1.Range("A2").Value Then
If Sheet1.Range("K4") = "" Then
MsgBox "Please check 06:00 tasks not done yet!"
Cell = "Range(" & Chr(34) & "F4" & Chr(34) & ")"
If Sheet1.Range("C4") + 0.042 < Sheet1.Range("A2") Then
Run "EmailProSheet"
End If
End If
End If
EmailProSheet is what i call but now i want to use the variable "Cell" in the procedure as well?
Module3
Code:
MsgBox Cell
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
On Error Resume Next
[Code]........
As it is now everything is working fine but does not return a value in "Cell" if the procedure is called. Is there another way?
View 5 Replies
View Related
Aug 20, 2014
1- Open enclosed file.
2- Run Macro1.
3- Wait some time completing running Macro1.
4- Run Macro2.
5- Wait some time completing running Macro2.
6- Look MessageBox to see that what is Macro2 running time. (Note: My Macro2 running time is 06 minutes and 49 seconds)
My question is how can I decrease Macro2 running time ?
I am open all ideas like copy data to NotePad and paste again excel etc.
View 3 Replies
View Related