Need to run formula against the output of another formula, but excel is giving me an error because its seeing the formula not the output. Is there a way make excel run the formula against the output?
=IF(B1=1,AND(E1<=5,"WITHIN","NEEDS UPDATE"))
the formula on E1 is =DAYS360(C6,D6,TRUE)
How do you write a code that will calculate a formula and output the result in a cell?
For example:
A1 = 1 (Named "Cell1")
A2 = 2 (Named "Cell2")
A3 = Results of macro for Cell1+Cell2 = 3
Is there a way to write it if I also want B3 = B1 + B2 and C3 = C1 + C2, etc.
I am trying to get a list of states, based on their expiration date.
I have all 51 states listed, some states have 2, 3 or more licenses, so I created a column that I hid of the state abbreviation, for the use of formulas.
If the license expires in 30 days or less I want to display the state abbreviation. I couldnt figure out how to do an array output, so this is what I am trying to come up with.
=IF(COUNTIF('Kevin Doyle'!F5:F250, "
In column A i am using the following formula to output "Our Apple" when "Apple" is in column D and "Our Banana" when "Banana" is in column E:
[Code] .....
I would like the formula to also output "Big Apple" immediately underneath "Our Apple" when its present, and output "Big Banana" immediately below "Our Banana" when it is present.
The yellow column is how column A should look after the formula edit.
Attached File : Book2.xlsx‎
I have a fomula field in row 67 and 68 .Row 67 calculates the average and row 68 calculates the improvement i.e. average(row 68)- last row inserted(row 67). The values for improvements are not showing correct value. C68 seems to give correct value but B68 and D68 is giving wrong value.
B68=4.8-4.5 =0.3 but it shows 0.4
C68=14.9-15.1=-0.2
D68=11.3-10.2=1.1 but it shows 1.0
I have attached the sheet also.
Sheet 1.xlsx
I'm using "Mangal" Hindi font for entering the data but I'm not getting Hindi numbers in the output by formula. The output is in English numbers which I want in Hindi numbers. The marks are in Hindi numbers but the output is in English numbers.
The remark in column "bz" should be in English.
How to get the output in Hindi numbers.
Assuming I’ve the following sample data and wishing if the output data could be formatted using some excel formulas, refer to below sample.
Sample data (Sheet1):
StudentA | Lesson1
StudentA | Lesson21
StudentA | Lesson10
StudentA | Lesson5
StudentB | Lesson5
StudentB | Lesson6
StudentC | Lesson9
StudentC | Lesson8
StudentC | Lesson9
StudentC | Lesson15
StudentC | Lesson11
StudentC | Lesson30
StudentC | Lesson13
StudentD | Lesson1
StudentD | Lesson2
StudentD | Lesson3
StudentD | Lesson4
StudentD | Lesson5
StudentD | Lesson6
StudentD | Lesson7
StudentD | Lesson8
Sample output (Sheet2):
StudentA | StudentB | StudentC | StudentD
Lesson1 | Lesson5 | Lesson9 | Lesson1
Lesson21 | Lesson6 | Lesson8 | Lesson2
Lesson10..................Lesson9 | Lesson3
Lesson5....................Lesson15 | Lesson4
.................................Lesson11 | Lesson5
.................................Lesson30 | Lesson6
.................................Lesson13 | Lesson7
..................................................Lesson8
The sample data could be long and a lot, so it's best if the formula can be made flexible to cater for this requirement.
Please refer to the attached file for some sample data.
I have a column A with date formatted as dd/mm/yyyy. I then have a column B which is =A, and I reformat the date formats to a custom format DDDD which gives me the day of the week that the date relates to.
I then try and write an if statement
e.g. =If(b1="Friday",1,0)
B1 always references the date which is stored as 40118, when I need it to reference the actual formatted value that I see in the cell e.g. Friday?
I have a fomula field in row 67 and 68 .Row 67 calculates the average and row 68 calculates the improvement i.e. average(row 68)- last row inserted(row 67). The values for improvements are not showing correct value. C68 seems to give correct value but B68 and D68 is giving wrong value.
B68=4.8-4.5 =0.3 but it shows 0.4
C68=14.9-15.1=-0.2
D68=11.3-10.2=1.1 but it shows 1.0
I have attached the sheet also.
Sheet 1.xlsx - Speedy Share - upload your files here
I want my formula to output a blank cell if the answer is 0. Ex. [B1=IF(A1=0, ???, A1)]. I want B1 = A1 if A1 is not 0. I want B1 to output a blank cell if A1 = 0.
View 3 Replies View RelatedIs there a function that will output the column letter? For example there's one I know of: =COLUMN(), which outputs column number, but not the letter. And if not, can a formula be written to output it without converting the spreadsheet to R1C1 style or using the lookup function that refers to a separate table within the spreadsheet?
View 3 Replies View RelatedI know that I an probably asking for too much but I must get the formula some way. OK, I need a formula for this:
lets say I have 3 columns (A,B,C (search criteria). In each Column there is a DIFFERENT number. There is 3 more columns (D,E,F (used to compare).Each column has 3 Different numbers. If 3 numbers match between the two sets of 3 numbers I want Column G to display "CCC". IF 2 numbers match I want G to display "CCH". If 1 number is a match I want G to display "HHC". If none of the numbers match I want G to display "HHH".
I can manually do these but it will take waaaay toooooooooo much time to do. If you can do this for me it would be a great help indeed because I'm trying to do other states. With this formula I can use Automate to do a large quantity of numbers.
is there a formula that would have as it's output the cell address of the
same cell where the formula has been entered.
e.g. In cell A10 I input a formula whose output is the cell reference A10.
I have a formula in column J that is the following:
=IF(I541="",IF(ISNUMBER(SEARCH(LEFT(G541,4)&"*"&RIGHT(G541,4),H541)),G541,""),"")
See screenshot:
I need to replace "G542" in the formula above. For example, in cell J541 shown above, I need it to output "1996-1999|2000-2001" instead of "1996-2001" I need the output to include LEFT(G541,4)&"*"&RIGHT(G541,4)
Trying to look for formula for searching through Range and search through Data to achieve expected res
Data Output ExpectedRange
Pune 123 is city Pune 123 Mumbai 999
Maharashtra 345 is state Maharashtra 345Pune 123
India 678 is Country India 678 Nagpur 666
Maharashtra 666 is state OthersPune 555
Below is the query i used for manual search however need formula to see through Range and achieve output expected
=IF(ISNUMBER(SEARCH("Pune 123",A5)),C5,
IF(ISNUMBER(SEARCH("Maharashtra 345",A6)),C6,
IF(ISNUMBER(SEARCH("India 678",A7)),C7,"Others")))
Sometime it’s so hard to explain what it is you are having problems with, specially in the little title. I'm trying to write a formula which should be very simple but isn’t . The formula is in box F10 if B10 has anything in it and its going to have a mixture of text and numbers (first text then numbers) then it’s should equal to the value in the box C7. Here is the formula I wrote that doesn’t work.
View 4 Replies View RelatedI have column A and column B:
I will be inputting data into column B.
I need excel to check to see if the data I input into column B is an exact match to the data in column A.
If it is an exact match, then column B will remain blank.
If the data in column B is different, I need column B to show the following:
No match: <data>
Example I input in column B the following:
Column A Column B
1. Car Car
2. 4357 9999
3. fsd34d 4erd
4. 98dkf 98dkf
Spreadsheet should show:
Column A Column B
1. Car
2. 4357 No match: 9999
3. fsd34d No match: 4erd
4. 98dkf
(Cell 1 and 4 in column B are empty because they are exact matches to Column A cell 1 and 4)
My questions:
1) How does the excel formula need to be written for this to work?
2) Is there a way to set it so that when I do a mass copy to data into column B that the formula will not be overwritten and it will still check to see if the data I copy and pasted into that column matches the data next to it in column A?
I have a long chain of formulas calculating the return on a particular investment in equipment. We'll call the inputs A, B, and C, and the output (total savings generated) Z. There are several set combinations of values for A, B, and C that I'm interested in generating a summary report for.
There are a number of steps in-between the inputs that I'm interested in, all of which are necessary to get to the output, but is there a good way to have excel chart inputs and outputs without filling out the intervening data?
I suppose the whole thing is essentially a multi-variable, multi-step data table.
I am looking to create a function that outputs the upcoming quarter end date based on a specified start date, for which the quarter end is based on a broken fiscal year ending december 15.
As an example, say that you sign up as a customer with an internet provider on 2014-01-01. The internet provider charges all their clients on a quarterly basis and have a broken fiscal year ending on december 15. Hence, as you signed up on 2014-01-01 you will be charged on 2014-03-15, which is the date of the company's first quarter end.
So what I would like to do is to set up a function that outputs the first date I will be charged based on the date that I sign up. If I sign up between december 2013-12-16 and 2014-03-15, the formula should output 2014-03-15. If I sign up between 2014-03-16 and 2014-06-15, the formula should output 2014-06-15 etc. etc.
I've got the following sumproduct formula (which seems to work):
=SUMPRODUCT(--(ISNUMBER(SEARCH($B17,Product_Keywords))),--(YEAR(Invoice_Date)=H$3),--(ROUNDUP(MONTH(Invoice_Date)/3,0)=H$4),--(Invoiced_Amount))
B17 is a keyword to be found in the Product_Keywords range
I'd like to modify it so that:
ifthe cell in the range Product_Keywords also includes "," thendivide the sumproduct by the number of commas+1
Presumably I could add --(ISNUMBER(SEARCH(",",Product_Keywords) as one of the conditions,
but how would I keep track of the number of commas in the cell?
I have a cell in sheet1 (say, B2) in which I can key a date. Once I change that date, cell C10 updates (after I hit F9 to recalculate) with a new number based on the new date.
I have a list of dates on another sheet, from 1/1/2009 to 12/31/2013, all in column B. I want to produce VBA code that will run through each day, 1/1/2009 to 12/31/2009, in sheet1 cell B2 and take the output in C10 and place it next to each day in column B until it reaches the end (12/31/2013). I know this is possible but for some reason am having trouble coming up with the right looping mechanism.
You can imagine if I had to manually key in each day to get the desired output how tedious that would be.
I can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies View RelatedI've attached a sample workbook. I'm trying to have a running total on column F once column G is completed with a ship date. The formula I have right now is =IF(G2:G55<0,SUM(F2:F22),0). but it's coming up w/zero.
View 2 Replies View RelatedI am trying to run a formula to turn dates into days. I have this =TEXT(D2, "dddd") formula to run, inserting the reponse into a new column called Days; but am running into trouble with setting it out in VBA, so that it only runs until the last row of the date column, AND automating the conversion because D2 will be the new row, whilst moving down the columns.
View 2 Replies View RelatedLet's say I have the numbers 1-10 in A1 to A10.
I want to create a formula in A1 to automatically add each number (1+2+....)without creating a new formula every time. I want to start this operation in B1.
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column F, Row 7 (This will be a new/different number entered every day)
Column G, Row 7 (Begins with a starting total of 2545)
I need Column G to add to it whatever number is entered into Column F, Row 7 and to keep the new total (ex. enter 10 into Column F/Row 7 & the total of Column G/Row 7 becomes 2555; if I then enter 20 into Column F/Row 7, Column G/Row 7 adds 20 to the original 2545, not the new total of 2555).
Column G is not keeping the new total, it reverts back to the original number of 2545.
I wonder if it is possible to formulate a formula in which average values are recalculated after every added record.
For example:
Record 1 shows an amount of 200 so the average value after 1 record is (200/1) 200. Record 2 shows an amount of 250 so the average value after 2 records is ((200+250)/2) 225. Record 3 shows an amount of 210 so the average value after 3 records is ((200+250+210)/3) 220.
I don't want to calculate all averages manually and most probably there must be a formula that is able to recalculate the average value after another record is added to the file.
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number) Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total. So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Essentially, I would like a user to be able to select a PUB from the Data Validation drop down in row 2 of the PUB RATES sheet so that the corresponding information in the DATA sheet autofills.
Currently, this works only for the first column under each PUB when selected and this fills across all 4 columns (rather than the respective information for each column filling).
Also, the Data Validation dropdown includes blanks which I would like to exclude.
I have used a Range Name for the Data Validation of each PUB so that these can be drawn from a separate sheet as I don't want all the DATA content on the same sheet as the PUB RATES content.
formula for -- If Text = 1 and Text =-1 adjust running total
example:
1312 (total)
SS1311 (new total)
LA1310 (new total)
LB1309 (new total)
LS1310 (new total)
LS =+1
SS, LA, LB =-1