SUM Range More Than One Column - SUMIF
Jun 18, 2009
How would I SUM all the results from results 1-5 if say ITEM in column A = C?
SUMIF wont work as it only sums the first column...
ABCDEF1ITEMRESULT 1RESULT 2RESULT 3RESULT 4RESULT 52A1227723B1075554C21772 5A1010 3376A5 23357B133 7 8C7 1 29C555 10B72772
View 8 Replies
ADVERTISEMENT
Oct 25, 2007
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies
View Related
Apr 21, 2009
I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
View 5 Replies
View Related
Jan 6, 2009
I have a simple sumif formula that says =SUMIF(W61:W112,"<30",J61:J112). In column W, there are values ranging from 0 to 5000. If the formula is written like it is above, it excludes summing values from column J when the cell in column W equals 0. Why is this? I can just add another function that says sumif "=0", but I don't think I should have to.
View 3 Replies
View Related
Jan 11, 2013
I have "systems" that have multiple "units". I what to sum values for units that have EXACT MATCH in the system column. Example data is below.
I am trying things like =SUMIF(B:B,"EXACT MATCH",C:C)
How do I express exact match? For example the first 3 in the list I would want to return a value of 9. Note: Lists can have up to 3000 rows and > 1000 system ID's.
Unit ID
SYSTEM ID
Qty
MRK0012179
MRK0012179
3
[Code] ......
View 9 Replies
View Related
Sep 14, 2013
I'm looking to build a football data sheet on matches played with a column that adds up the last 3 match goals for the team in that row. I've only managed to get as far as adding up all goals for a team in a static date range using SUMIF. I imagine this is more complex and requires some kind of changing sum range that's relative to the cell I'm in.
I'm intermediate at best so any array formulas and VB script would preferred to be avoided if possible.
in the watered down example below, I'd like to add up all home team goals for Hereford in the last 3 matches, therefore excluding the game on the 10th (row 1) giving a total of 5. I'd like this formula to copy down from a13 to future matches and therefore update. So the next week's match will add goals for hereford from e13,e11,e8 but exclude e2, e5. Yes you've guessed it... I'm trying to work out recent team form to predict match outcomes for financial gain...
View 4 Replies
View Related
Mar 20, 2012
I have a worksheet (A) similar to the following:
Jan '12, Feb '12, Mar '12 --> Header Row
-5, 10, 2
6, -2, 3
5, -2, -1
I have another worksheet (B) with the same header Row (Jan '12, Feb '12, Mar '12). I need to create formula in cell A2 on worksheet B (right under Jan '12) that dynamically locates the Jan '12 column in worksheet A and then sums the numbers in that column only if they are < 0.
So in cell A2 on worksheet B (under Jan '12) I'd have -5 (only -5 is < 0), in cell B2 on worksheet B (under Feb '12) I'd have -4 (-2 + -2) and in cell C2 on worksheet B (under Mar '12) I'd have -1.
I've tried several variations of sumproduct, sumif, index, etc. with no luck.
View 3 Replies
View Related
Apr 12, 2009
I have come across this SUMIF formula which sum a range and ignoring errors produced by formulas in the range, I can't figure out how this works and need the expertise of the Excel experts here. =SUMIF(A2:A9,"<1E100"). What does "<1E100" represent and how its work
View 2 Replies
View Related
Nov 13, 2009
I have Excel 2003 and my problem is to execute a SUMIF formula between 1 column (where a simple equal criterion must be verified) and 1 row.Let's suppose that column A contains these values:
A1: a
A2: b
A3: a
A4: d
and suppose that the criterion is the equality with the character "a".
Let's suppose that 6-th row contains these values:
A6: 1
B6: 2
C6: 3
D6: 4
Now, I would like to execute a SUMIF between the first 4 elements of A column (a, b, c, d) using as criterion the equality with "a", and the first 4 elements of 6-th row (1, 2, 3, 4).............
View 5 Replies
View Related
Apr 30, 2008
I am trying to use a sumif formula to sum an entire row if it meets the selection criteria
For example if I have months in Column A (appearing more than once), and Various Totals for each month in Columns B, C and D I want to be able to sum the total of B, C and D for every occurence of the month in my list. Trick is I want to be able to avoid sticking a total column in say Column E
I tried SUMIF(A:A,"Month",C:E) but it is only adding up column C
View 9 Replies
View Related
Nov 1, 2012
I am currently recorded a macros for a sumif formula. But since the number of rows will not be same every time.
I want the code for a dynamic range.
VB:
Range("E7").Select
ActiveCell.FormulaR1C1 = _
"=SUMIF('V1 Pivot'!R5C2:R32C2,'Task Level Tab'!R7C2:R30C2,'V1 Pivot'!R5C3:R32C3)"
Range("E7").Select
[Code] ....
View 9 Replies
View Related
Jan 8, 2006
Range:
C3,C14,C25,C34,C41
Criteria:
>0
sum-range:
C3,C14,C25,C34,C41
I can't get that to work since the commas in the range are throwing the function off.
View 14 Replies
View Related
May 8, 2009
I'm trying to built a range to be used at SUMIF. I have the sheet names at column A:A and want to create something dynamic to avoid selecting sheet by sheet all the neccesary ranges but sumif doesn't recognize a range like A1&"!"&B:B for example. I tried different ways but I can't get it!
View 2 Replies
View Related
May 8, 2009
How do I sumif the date falls between two dates in a quarter.
For example Date of Activity - CellBG43 = 10/10/2008
I want to sum the corresponding Cell BJ43 with cost associated with the activity if the date falls between "01/10/2008"and "31/12/2008".
I tried =sumif(BG43,">=01/10/2008 and <=31/12/2008",BJ43), =sumif(BG43,">=01/10/2008 & <=31/12/2008",BJ43) and it didn't work.
View 3 Replies
View Related
Jun 18, 2009
I have a large spreadsheet, to which I add 4 weeks worth of data, from a database printout, (cut n paste) to the bottom, this could be any number of rows. However there is a column with week numbers in for each row. I can happily use =SUMIF('FORM R60'!$H$1:$H$1248,$A1,'FORM R60'!$AH$1:$AH$1248)
This gives me the info I need on a TOTALS sheet, across various columns and rows, where the formula sits, adjusted for whichever column of data I require totals. This info is then read by another spreadsheet.
However, rather than manually change the formula (to suit a range) to add certain numbers of weeks, as I do now, I would like to include in the formula a condition say where the week numbers are >5 and <10, preferably if the condition could refer to cells.
View 4 Replies
View Related
Jan 8, 2006
range:
C3,C14,C25,C34,C41
criteria:
>0
sum-range:
C3,C14,C25,C34,C41
I can't get that to work since the commas in the range are throwing the
function off.
View 13 Replies
View Related
Jul 5, 2012
At the moment I have the below formula that retrieves a value from a separate sheet (the INDIRECT part of the formula determines the sheet to be looked at, as there are numerous and they are dependent upon what is displayed in two drop down lists in cells B3 & E3).
The problem is that the ranges F6:F30000, AJ6:AJ30000 and AA6:AA30000 are not always consistently in the same column position each and every time I receive a refresh of the report. The column headings, however, are always in the same row. Obviously I don't want to have to manually update the formula every time I receive a refresh of the report, so any way that I can get the aforementioned ranges to become more dynamic, so that the correct value will be retrieved each time? I am thinking something like an INDEX/MATCH combo but I am struggling to apply that idea to the 'SUM RANGE' section of the SUMIF function. This is the formula I have so far:
=SUMIF(INDIRECT("'"&$B$3&"'!F6:F30000"),$E$3,INDIRECT("'"&$B$3&"'!AJ6:AJ30000"))
/SUMIF(INDIRECT("'"&$B$3&"'!F6:F30000"),$E$3,INDIRECT("'"&$B$3&"'!AA6:AA30000"))
View 4 Replies
View Related
Dec 27, 2012
I have data headings in A1-E1 and actual data in A2-E2. I have a SUMIF function in F2.
A B C D E F
A B A B B
1 2 3 4 5 =SUMIF(A1:E1;"A";A2:E2)
When I insert new data columns between column E and F, the formula still refers to columns A-E although I would like to have the newly added columns in that SUMIF-function included.
For example, if I add 3 new columns, the new SUMIF-function (now in cell I2) should become =SUMIF(A1:H1;"A";A2:H2).
Do to modify the SUMIF-function to do that?
View 4 Replies
View Related
Nov 24, 2006
I have an example, see attached. I am trying to find the sum of a number of columns where the critera is between a number of days ie values is greater than 365 but less than 1788 days. The values to sum is the amount for each row where this criteria is met.
View 7 Replies
View Related
Jan 27, 2009
I have a spreadsheet that lists something like this (an easy version of it anyway!)
On tab 1 of my spreadsheet I have a table with lots of data similar to:
Column A Column B
111 12.23
111 14.32
222 48.23
222 28.34
222 10.23
222 33.40
333 23.21
On tab 2 of my spreadsheet I have unique versions of the data Column A on tab 1, for instance:
Column A
111
222
333
I would like to have a formula on tab 2 that can compare column A on tab 2 with column A on tab 1 - if it is similar I want it to total the amounts for all of the values equal.
So for instance, on tab 2 the final data should be this in my example:
Column A Column B
111 26.55
222 120.20
333 23.21
I've seen formulas that are similar.. but the condition is it can only total the rows that match. And preferably can do this from the other sheet.
View 2 Replies
View Related
Apr 22, 2014
In the B column i have dates. In the C column i have total hours.
Right now the following code counts how many instances of a date (Dt) are found and makes a decision if it is more than 3.
VB:
IVAL = Application.WorksheetFunction.CountIf(WS.Range("B:B"), Dt)
If IVAL > 3 Then
What i need is to SUM the hours (C column) for each instance of the date (Dt) in the B column, and test if it is greater than 24. so it would be similar to this:
VB:
IVAL = Application.WorksheetFunction.SumIf(WS.Range("C:C"), Dt)
If IVAL > 24 Then
Except that this code attempts to sum the hours of the C column and also wants to recognize the dates from the C column which would not work. I need something different than SUMIF. I need it to Sum the C column for the appropriate dates (Dt) in the B column.
View 2 Replies
View Related
Feb 25, 2009
I am try do is a sumif that Excludes a column if it as 100% in there, I have managed to do the sumif (( =SUMIF(A:A,F3,E:E)+SUMIF(A:A,F3,F:F) )) but
I don’t know what to put if I want to ignore it, if it has 100% in a cell
I have attached a test sheet if someone could have a look and try point me in the right direction
It works out a percentage returned if column E / F = the full amount in column k
View 5 Replies
View Related
Jun 14, 2013
I have a spreadsheet using a SUMIF formula =SUMIF(G:G,A2,D:D) that is working fine.
However, I wish to introduce a "multiplier" column (E). That is, if the corresponding row has a figure in the E column I wish to multiply that figure with the corresponding figure in D.
D E G
6 5 A
5 0 B
4 0 A
A = 6 x 5 + 4 = 34
B = 5
View 3 Replies
View Related
Aug 29, 2013
How to use formula approach to get the total figure for A & B
A
1
2
3
B
4
5
6
[Code]....
View 9 Replies
View Related
May 1, 2006
I'm trying to use the Sumif formula when the "Sum_range" parameter is dynamic. I can identify the column number (by using "match" formula) but I have no idea how to use this information as a parameter in my SUMIF.
View 2 Replies
View Related
Sep 17, 2006
I am trying to setup formula so I can enter column letter and sumif should update with proper sum range to be summed ...
View 4 Replies
View Related
Jul 17, 2009
I know how to use array formulae to create a unique list, i.e.{=INDEX($G$1:$G$760,SMALL(IF(ROW($G$1:$G$760)=MATCH($G$1:$G$760,$G$1:$G$760,0),ROW($G$1:$G$760)),ROW()))}
however this is giving all the unique items from column G and I only want the unique items that have a non-zero value in column H as well. This would be the sumif of all instances that would have to be zero. I've tried to crack it and I've tried to search for solutions but so far no joy.
View 9 Replies
View Related
Apr 9, 2013
I have the following formula and it works.
=SUM(IF(AND((Transfers!B6="Labour"),(Transfers!C6="In")),Transfers!G6,""))
Basically the sheet 'transfers' has a column named type and one named in/out, the current formula I have does a logical test on both of these and then if they are both true takes the cost of it from a column named cost. This works fine for single rows. However on another sheet I am trying to use the above formula but there will sometimes be more than one entry for the same date on the sheet 'transfers' and all the same dates that meet the logical test's conditions need to display the sum of the cost on this other sheet.
View 1 Replies
View Related
Apr 28, 2014
I am trying to get a SUMIF formula to work where the following: - RANGE = Column N:N (These are all a list of dates) CRITERIA = Cell C20:D20 (These are the dates i want to look at) SUM_RANGE = Column P:P
Basically, I want to SUM all the numbers on Column P where the date in Column N falls between and including the dates in Cell C20 and D20
In attachement, I want to show in the YELLOW cells the SUM of Column P where the Date in Column N is between the Dates in column C and D.
View 3 Replies
View Related
Jan 8, 2014
I am working on a report for work with the following formula:
=SUMIF(A5:G8,AND(between 1-1-13 and 1-31-13,"soft cost"),G5:G8)
my formula is "IF A5:G8 IS BETWEEN JANUARY 1st 2013 AND JANUARY 31st 2013 AND ALSO IF IT IS A SOFT COST THEN GIVE ME THE SUM OF THAT ROW"
Pretty much column A contains different dates and column C indicates whether a cost is a "hard cost" or a "soft cost". If the date is within the month of January AND if it is a soft cost, I need the dollar amount in column G summed-up (must meet both criteria - January and soft cost).
View 4 Replies
View Related