In the B column i have dates. In the C column i have total hours.
Right now the following code counts how many instances of a date (Dt) are found and makes a decision if it is more than 3.
VB:
IVAL = Application.WorksheetFunction.CountIf(WS.Range("B:B"), Dt)
If IVAL > 3 Then
What i need is to SUM the hours (C column) for each instance of the date (Dt) in the B column, and test if it is greater than 24. so it would be similar to this:
VB:
IVAL = Application.WorksheetFunction.SumIf(WS.Range("C:C"), Dt)
If IVAL > 24 Then
Except that this code attempts to sum the hours of the C column and also wants to recognize the dates from the C column which would not work. I need something different than SUMIF. I need it to Sum the C column for the appropriate dates (Dt) in the B column.
I have several numbers that are contained in non-adjacent cells. I need to create a cell that will evaluate the cells individually to make sure that they are within a certain range. Once that is done, I want the remaining numbers that are within the range to be averaged. How the heck can I accomplish this task? SUMIF and COUNTIF will not allow me to use non-adjacent cell ranges.
I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed Disposal Order Latest Decision date for D.O.
I need a formula to run down a column DCapture.JPG (starting at 142), when it finds the last entered value it needs to display the corresponding value from column J into cell AA21.
If you see the attached photo, the last entered data in column D would be 1, AA21 would be saying -30 (J205)
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
I need to sum values in a column, but only if the text in the same row of the adjacent column meets certain criteria. Below is a simplified version as an example:
A1 - Apple A2 - Banana A3 - Apple A4 - Banana
B1 - 3 B2 - 2 B3 - 1 B4 - 1
I need a formula that will add up the cells in column B that have "Apple" next to them in column A. Apple would total up to 4 and Banana would total up to 3.
I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
I had a problem finding something then deleting the column, I tried to alter the code from that thread to solve a new problem and I am close (I think), but not quite there. I need to find the column "Group" and merge it with the column "Sex" which is offset by 1 column. This code will go through and find the column "Group" and merge for the first cell, but will then get stuck in a loop just concatenating "Sex" to the end continuously. I need it to concatenate both columns entirely together. Any simple fix to what I modified? Previous thread should you be interested:Find Part Text On All Sheets & Delete The Column.
I have are two worksheets, "Sheet 1" which is a bill of lading form and "Sheet 2," in which columns A and B contain Part Numbers and Weights respectively.
What I'm wanting to have happen is when a user inputs a part number into Sheet 1 (say in cell B6), it calls a UDF that looks up the part number on sheet two column A and returns the corresponding weight from column B (to say cell C6 on sheet 1).
I have "systems" that have multiple "units". I what to sum values for units that have EXACT MATCH in the system column. Example data is below.
I am trying things like =SUMIF(B:B,"EXACT MATCH",C:C)
How do I express exact match? For example the first 3 in the list I would want to return a value of 9. Note: Lists can have up to 3000 rows and > 1000 system ID's.
Jan '12, Feb '12, Mar '12 --> Header Row -5, 10, 2 6, -2, 3 5, -2, -1
I have another worksheet (B) with the same header Row (Jan '12, Feb '12, Mar '12). I need to create formula in cell A2 on worksheet B (right under Jan '12) that dynamically locates the Jan '12 column in worksheet A and then sums the numbers in that column only if they are < 0.
So in cell A2 on worksheet B (under Jan '12) I'd have -5 (only -5 is < 0), in cell B2 on worksheet B (under Feb '12) I'd have -4 (-2 + -2) and in cell C2 on worksheet B (under Mar '12) I'd have -1.
I've tried several variations of sumproduct, sumif, index, etc. with no luck.
I have a spreadsheet with a list of account numbers and values(sheet1) and on a seperate sheet (sheet2) a list of all unique account numbers that appear in the transaction data sheet.
What I am trying to do is get a total sum for the values of each account number. What I am getting well I'm not quite sure what I'm getting. The problem appears to be when the xSubtotal variable is reset to 0 at the end of calculating all the values for the account number.
The first two columns are an example of my data set; I would like a formula for the 3rd column (Length+1) which will give me the length at the next age (i.e the value in the cell below in most cases) unless the following age is 1 in which case I want it to return zero.
When I record a macro I use the paste down feature, but in the code it just sets the paste down to the last cell and sets that number in the code.
What do you put in the code so it finds the NEW bottom of the column when the columns get longer or shorter? I tried recording in relative reference and that did not do it - what's the trick?
I want to write some VBA code that simulates the double click of the square in the lower right of a selected cell. When you double click it, it fills every cell in column A until the first blank in column B. I was able to find this code searching around:
I have a substantial schedule that has been completed by a 3rd party who has used the comment function for important data. Can anyone suggest how i can utilise a macro to extract all of the comments into the adjacent column?
The comments are currently against cells in column E and i'd like to extract them to blank cells in a newly inserted column F.
Sub For_Adam() For x = 1 To Range("G7") Calculate Range("G11").Select Selection.Copy Range("B15").Select ActiveCell.Offset(x, 0).Range("A1").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False
Next x Application.CutCopyMode = False End Sub
Now all I want is for this to be repeated in the next column, so everything is exactly the same but it doesn't start in B15, but starts in C15, then D15 etc.
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
I have Excel 2003 and my problem is to execute a SUMIF formula between 1 column (where a simple equal criterion must be verified) and 1 row.Let's suppose that column A contains these values:
A1: a A2: b A3: a A4: d
and suppose that the criterion is the equality with the character "a". Let's suppose that 6-th row contains these values: A6: 1 B6: 2 C6: 3 D6: 4
Now, I would like to execute a SUMIF between the first 4 elements of A column (a, b, c, d) using as criterion the equality with "a", and the first 4 elements of 6-th row (1, 2, 3, 4).............
I am trying to use a sumif formula to sum an entire row if it meets the selection criteria
For example if I have months in Column A (appearing more than once), and Various Totals for each month in Columns B, C and D I want to be able to sum the total of B, C and D for every occurence of the month in my list. Trick is I want to be able to avoid sticking a total column in say Column E
I tried SUMIF(A:A,"Month",C:E) but it is only adding up column C
I am trying to make printable book labels in one worksheet based off of values from another. The labels that I have are standard address sized and come in sheets with 3 columns and 10 rows. My "label" worksheet has 5 columns (with B:B and D:D as "spacers") I made a "calculation" worksheet that simply runs the equation I want to use for the labels from A1:A1000. On the "label" worksheet, I have this formula in cell A1:
This way, it won't return 0s for blank cells from the "calculations" worksheet. I dragged down the formula to cell A10, but would like to continue the pattern so that cell C1 would be:
Then cell B11 would be 41, C11 would be 51, A21 would be 61, etc.
I can do it manually by adding the function in the top row of each "page" (A1,C1,E1 then A11,C11,E11...) and dragging them down each "page." However, I may end up with 20 some pages of labels. I feel like there should be an easier way I can do this.
How to do this or if there's even a formula or even a macro i could run to run this data.
I have three rows of data (29-31) from columns D to Q.
I would like to take D29 and add each of the values in the adjacent columns exactly once and sum up the value D thru Q
For example I'd like to return not just Sum(D29:Q29) but also Sum(D29:R29)+Q30, Sum (D29:R29) +Q31.
I guess that might be considered a 1X3 matrix & and 8X3 matrix, but I'm not really sure how to set up the return values for these equations nor how to return them very quickly.
I have three rows of data (29-31) from columns D to Q.
I would like to take D29 and add each of the values in the adjacent columns exactly once and sum up the value D thru Q
For example I'd like to return not just Sum(D29:Q29) but also Sum(D29:R29)+Q30, Sum (D29:R29) +Q31.
Macro that would add these values?
That is D29 + E29 or E 30 or E31 + F 29 or F 30 or F 31 + G 29 or G 30 or G 31... and on?
Even though I wrote "or" above, i would need the other values to be added in a separate calculation, until all possible permutations of D and the following 8 columns and 3 rows of data are exhausted.
