Sumif (compare Column A On Tab 2 With Column A On Tab 1)
Jan 27, 2009
I have a spreadsheet that lists something like this (an easy version of it anyway!)
On tab 1 of my spreadsheet I have a table with lots of data similar to:
Column A Column B
111 12.23
111 14.32
222 48.23
222 28.34
222 10.23
222 33.40
333 23.21
On tab 2 of my spreadsheet I have unique versions of the data Column A on tab 1, for instance:
Column A
111
222
333
I would like to have a formula on tab 2 that can compare column A on tab 2 with column A on tab 1 - if it is similar I want it to total the amounts for all of the values equal.
So for instance, on tab 2 the final data should be this in my example:
Column A Column B
111 26.55
222 120.20
333 23.21
I've seen formulas that are similar.. but the condition is it can only total the rows that match. And preferably can do this from the other sheet.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D. e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
I have "systems" that have multiple "units". I what to sum values for units that have EXACT MATCH in the system column. Example data is below.
I am trying things like =SUMIF(B:B,"EXACT MATCH",C:C)
How do I express exact match? For example the first 3 in the list I would want to return a value of 9. Note: Lists can have up to 3000 rows and > 1000 system ID's.
Jan '12, Feb '12, Mar '12 --> Header Row -5, 10, 2 6, -2, 3 5, -2, -1
I have another worksheet (B) with the same header Row (Jan '12, Feb '12, Mar '12). I need to create formula in cell A2 on worksheet B (right under Jan '12) that dynamically locates the Jan '12 column in worksheet A and then sums the numbers in that column only if they are < 0.
So in cell A2 on worksheet B (under Jan '12) I'd have -5 (only -5 is < 0), in cell B2 on worksheet B (under Feb '12) I'd have -4 (-2 + -2) and in cell C2 on worksheet B (under Mar '12) I'd have -1.
I've tried several variations of sumproduct, sumif, index, etc. with no luck.
I know how to use array formulae to create a unique list, i.e.{=INDEX($G$1:$G$760,SMALL(IF(ROW($G$1:$G$760)=MATCH($G$1:$G$760,$G$1:$G$760,0),ROW($G$1:$G$760)),ROW()))}
however this is giving all the unique items from column G and I only want the unique items that have a non-zero value in column H as well. This would be the sumif of all instances that would have to be zero. I've tried to crack it and I've tried to search for solutions but so far no joy.
I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
I have Excel 2003 and my problem is to execute a SUMIF formula between 1 column (where a simple equal criterion must be verified) and 1 row.Let's suppose that column A contains these values:
A1: a A2: b A3: a A4: d
and suppose that the criterion is the equality with the character "a". Let's suppose that 6-th row contains these values: A6: 1 B6: 2 C6: 3 D6: 4
Now, I would like to execute a SUMIF between the first 4 elements of A column (a, b, c, d) using as criterion the equality with "a", and the first 4 elements of 6-th row (1, 2, 3, 4).............
I am trying to use a sumif formula to sum an entire row if it meets the selection criteria
For example if I have months in Column A (appearing more than once), and Various Totals for each month in Columns B, C and D I want to be able to sum the total of B, C and D for every occurence of the month in my list. Trick is I want to be able to avoid sticking a total column in say Column E
I tried SUMIF(A:A,"Month",C:E) but it is only adding up column C
In the B column i have dates. In the C column i have total hours.
Right now the following code counts how many instances of a date (Dt) are found and makes a decision if it is more than 3.
VB: IVAL = Application.WorksheetFunction.CountIf(WS.Range("B:B"), Dt) If IVAL > 3 Then
What i need is to SUM the hours (C column) for each instance of the date (Dt) in the B column, and test if it is greater than 24. so it would be similar to this:
VB: IVAL = Application.WorksheetFunction.SumIf(WS.Range("C:C"), Dt) If IVAL > 24 Then
Except that this code attempts to sum the hours of the C column and also wants to recognize the dates from the C column which would not work. I need something different than SUMIF. I need it to Sum the C column for the appropriate dates (Dt) in the B column.
I am try do is a sumif that Excludes a column if it as 100% in there, I have managed to do the sumif (( =SUMIF(A:A,F3,E:E)+SUMIF(A:A,F3,F:F) )) but I don’t know what to put if I want to ignore it, if it has 100% in a cell
I have attached a test sheet if someone could have a look and try point me in the right direction
It works out a percentage returned if column E / F = the full amount in column k
I have a spreadsheet using a SUMIF formula =SUMIF(G:G,A2,D:D) that is working fine.
However, I wish to introduce a "multiplier" column (E). That is, if the corresponding row has a figure in the E column I wish to multiply that figure with the corresponding figure in D.
I'm trying to use the Sumif formula when the "Sum_range" parameter is dynamic. I can identify the column number (by using "match" formula) but I have no idea how to use this information as a parameter in my SUMIF.
I have a set of costs in column c (more that shown below) that have an indicator - for example 0 or 30 (there are more).
I need to populate rows 18 and 19 with the sumif - i have other tables where it is a straighforward sumif as the periods align, here though I need to check that the periods (rows 4 & 16) are checked and then the right data entered underneath.
I can't find a way to combine the sumif, with an if statement checking that the period is correct too? ...
I'm trying to create a SUMIF statement that that has an embedded OR statement within, and am unable to make it work.
Basically I want to say if "column Q" equals one of 2 criteria ("cat" or "dog") then sum the corresponding number in "column P" I've tried the following statement, but it is just resulting in a zero:
=SUMIF(Q9:Q32792,OR("cat","dog"),P9:P32792)
I've seen support on statements with multiple criteria in DIFFERENT columns, but not if searching for multiple criteria in the SAME column.
In the attached workbook, see the "P & L" tab, cells I30 to I48. The idea of the formula I have placed into these cells is to drag out the figures from column I in the "Trial Balance" tab of the workbook. A similar formula is used succesfully in the "balance sheet" tab in Column B. I don't understand why the formula doesn't work in the cells i've specified in in the " P & L" tab it seems to work for I8 and the rows immediately below it "revenue".
I have a download from an accounting general ledger which has the following:
Column A: Category Description Column B: Country Column C: Department Row 1: Months Note: Each row contains the last 12 months worth of costs
As the categories/criteria can appear multiple times, and there are thousands of lines, I have been using SUMIFS to calculate totals my required combinations (eg. Travel expense, Germany, Sales department)
Every month, the information refreshes to show the most recent 12 months worth of data. And this means I need to manually update my formulas to correct the month column headings, as everything moves by 1 month.
Would something like a SUMIF with a SUMPRODUCT work? Eg. if current month = July, then it would sum everything from the July column automatically?
I have a column of contract numbers of varying length. I want to run a sumif of all of the values on my reference sheet that have the contract number beginning with the contract number in my listing. All of the the contract values in my reference sheet are very long. Since the numbers I am working with vary in length, i don't know how to match this string in the sumif function
I want to sum values in a column only if the year of the date in the adjacent column is <= to the year in cell F61. the column to evaluate is in the format d/mm/yyyy, and F61 is just yyyy. What I want to accomplish but it doesn't work:
Following is a summarized example of my data and what I am trying to accomplish.
[Column A] contains a list of account numbers. [Column B] contains current balances, [column C] contains balances from one month ago, [column D] contains balances from two months ago. Within the same spreadsheet I want the ability to type in the account number in one cell and then the column number in another cell. For example, If I type in the account number 1234 and the column number 3, I would get the balance from [column c]...if I typed in the column number 4, I would get the balance from [column D].
My first thought was to use a simple SUMIF formula that would compare the account number I type with the account numbers found in [column A]. The problem is getting a formula that can translate the number 3 to [column C] or the number 4 to [column D]. Note: the actual spreadsheet I am using extends out to column BI.
This is simuilar to the Column Index Number used in a VLOOKUP formula.
Basically I am looking for Excel VBA code to compare 4 cell values from 1 sheet to 4 columns on another sheet, but the 4 values on other sheet must be in same rows. I am but a VBA beginner and I have been trying for days with no luck. I want it to go something like this:
IF A5 (on sheet1) = 40 AND B5 < (A value in column M on sheet2) AND C5 < (a value in column E on sheet 2 but in the same row as the previous) AND D5 < (a value in column F on sheet 2, also in same row as previous 2) THEN display model from column C on sheet 2 also from same column into sheet 1 G5
for example (see attachment) on sheet1 if you enter 40 into A5, 3846 into B5, 1492 into C5 and 1999 into D5 Then "MODEL19" (from sheet2) should show up in G5. I had put in a 'button' but it is not needed if there is a better/easier way to do this.
I have DAta in Col A (Med ID ) and B has number of events assocaited with the unique ID. The Unique ID is also in Col C from another data source. I wnat to return the value from Col B in in Col C that mathces the MD ID if available. There are several more col in the sheet that have other dta that is not assocaited with this. HAving an Excel formula or VB code will do some analysis. Example
Exported Med ID Data Source 1Exported Med ID Data Source 1 Number of Times Not Availle able Med ID- Matched Result From Col B to Med Id in C
