By Selecting From 2 Comboboxes, Copy From One Sheet Into Another One
Nov 9, 2009
I have 2 comboboxes in the complett worksheets. By selecting some values in this comboboxes, I need some code that will copy automatically some data from worksheets a and b, to worksheet export.
For example if I select "a" and "A26" in the comboboxes, I need range E26:B26( 4 col to the right of A26) from "a" worksheet, to be copied with Paste Special /Values/ Transpose into "export" worksheet in range A1:A50. Also I need in range A51 from worksheet "export" the value "A26" selected in the second combobox. Also in range A52 from worksheet "export" the value from range H40 from "complett" worksheet.
View 8 Replies
ADVERTISEMENT
Oct 23, 2009
I just started using vb two days ago so the problem is probably from the code. I created a userform with 2 comboboxes and 10 textboxes, when i choose an item from the first combobox it filters out the result from the second combobox.
And when i choose an item from the 2nd combobox it shows certain textboxes corresponding to that item. Everything works fine if i run the userform while on the sheet i pull the data off of (Devices sheet), but if i try it on another sheet then the comboboxes don't work anymore.
Another question i had is if there is simpler way to view the textboxes rather than the one i used in my code. And if there's a way to autoarrange the textboxes when i they are visible so that they all are in the same row.
View 5 Replies
View Related
Feb 20, 2012
I Have a sheet with 4 activex comboboxes and 3 text boxes. If the right item is selected in the second combo box a user form opens up. That has 4 text boxes. It has a command button titled ok that takes the information from the 4 text boxes and puts them in a sheet called data.
Code:
Private Sub cmbOK_Click()
With Worksheets("Data").Range("A1")
.Offset(1, 8).Value = Me.txtFirm.Value
[Code]....
I need a way for the above code to run when the ok button on the user form is clicked.
View 7 Replies
View Related
Mar 14, 2014
I have this code that first selects a sheet (data) and then imports a csv-fil to the data sheet.
I want to hide the data sheet and the the code doesn't work.
How do I change the import code so that I do not select the sheet?
[Code] ......
I believe it should be something like this: With Sheets("DATA").QueryTables. Add..... but I am not aware of the syntax.
View 1 Replies
View Related
Mar 28, 2012
I have 5 sheets in a workbook. After a code has run I want each sheet to be in A1 when they click on that tab (as there could be 50,000 rows on each), but when I try recording it it doesn't do it properly (Sometimes the A1 cell is active but the view is somewhere down the bottom of the sheet).
View 2 Replies
View Related
Mar 30, 2007
I know there is a simple answer for this, and I did a search but could not find what I am looking for. I am comparing two different workbooks. I loop through the first workbook (oldfile) and then find the corresponding value on the other file. I find the corresponding value using
With Worksheets(1). Range("b2:b" & blah)
Set c = .Find(MyVar, LookIn:=xlValues)
I know the cell address of the value that was found by
firstAddress = c.Address
Now I need to offset a few columns and copy the data. If the cell address was in R1C1 format then I could do this easliy by ActiveCell.Offset(Row, col + Offset).Copy
(where row and col are given from the c.address function. But I don't know the RC value since the c.address provides the value in "A1" format. I do not want to actually go to the cell and then do an offset and copy, since it is a large spreadseet and would be slow. I don't want to do a bunch of string manipulations (unless it easy). Is there a way to have c.address output it's values in R1C1 format? Or is there a different command I could use?
View 3 Replies
View Related
Feb 4, 2014
Base on this thread as reference:
[URL]
I have the same issue, but my data are all in 1 cell instead of separate cells.
The result on my sample Sheet 2, I use RIGHT, MID to pull the data, so I wonder if I can run a macro to have all the data in 1 click.
The header in Sheet 2 is to show you the order of the data to pull, having them or not is not the main thing. I need the data in the same order, that is more important.
View 3 Replies
View Related
Feb 11, 2013
I am trying to basically select the last sheet in a workbook, copy the contents, and paste into a new sheet which gets its name from an inputbox. I keep getting a select class error (1004).
Every month i end up adding a sheet and copying everything from the previous month, and then updating a few details which then updates my graphs. Trying to automate the process.
Here is what i have so far.
Code:
Sub Create_Report_Data()
Dim month As String
Dim wcount As Integer
[Code]....
View 2 Replies
View Related
Jul 25, 2008
When I am trying to select a data range on another sheet within the same document, I get an error. My code looks like this:
activeworkbook.sheets("mySheet").Range("A1:D3").Select
View 9 Replies
View Related
Aug 16, 2006
how I could go about selecting all of the "rectangles" on the active sheet. I think I have around 50 on one sheet so it's a real pain in the neck some times.
View 5 Replies
View Related
Jun 11, 2009
I have two columns of data (of varying length). The first column "A" has steadily increasing random values from about zero to 200. I would like to be able to automatically select/highlight the region with values between 50 and 100 as well the corresponding values in the adjacent "B" column.
View 4 Replies
View Related
Mar 8, 2013
I suspect this is extremely basic however how do I do the following in VBA? I have dataset with a column having a row of numbers as: 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, etc. What I want to do is copy some information designated by the first 1 then the first 2 then the first 3 to another worksheet leaving the other data. How do I selectively choose the first of the 1, 2 and 3 etc.
View 1 Replies
View Related
May 21, 2008
Is there a way to set up a cell so that when you click the cell, the cells value is automatically copied to the clipboard?
Example:
A1 = 1
A2 = 2
A3 = SUM(A1:A2)
Can you set up cell A3 so that when you pick it with your mouse, 3 is copied to the clipboard ready for you to paste elsewhere?
I have tried searching through the forum to find an answer but nothing has come up.
View 9 Replies
View Related
Nov 7, 2013
I am writing a UDF to find the average of two ranges, which start at the StartDate and then go back a certain number of days, that are on another sheet. When I use Union to try and unite my two ranges the resulting range just equals the first range.
VB:
Public Function ModifiedAverage(StartDate As Variant, SheetTenor As String, History As Double)
Dim DateRow, NbCols As Double
DateRow = Application.WorksheetFunction.Match(StartDate, Sheets(SheetTenor).Range("A:A"), 0)
NbCols = Application.WorksheetFunction.CountA(Sheets(SheetTenor).Range("6:6"))
[Code] ....
View 1 Replies
View Related
Apr 27, 2014
I am trying to avoid selecting sheets in my current project. I have a querytable in A1. I can get it to work if i selects sheet and range.
Can it be done using with as below
Code:
With Worksheets("meeting to look at")
End With
View 1 Replies
View Related
May 25, 2007
Sub test()
Dim ws1 As Worksheet, ws2 As Worksheet
Dim lastrow As Long
Dim newRow As Long
Set ws1 = Sheets("SUMMARY")
Set ws2 = Sheets("WIP")
Application.ScreenUpdating = False
With ws2
Range("A2:C2").Select
Range(Selection, Selection.End(xlDown)).Select ' Clear
End With
x = 10
lastrow = ws1.Range("C5").End(xlUp)
Do
The code is run from ws1. I put in the .select for now because I don't want to loose my info on ws1.
I trying to clear the range A2:C2 all the way down to where info is before doing the Do Loop which will repopulate the same range from ws1.
If the rest of the Do Loop code is needed, let me know.
View 9 Replies
View Related
Sep 4, 2009
I would like to create a spreadsheet where I enter a list of 30 40 names and associated data over 4 separate columns. I would like the option of having a check box next to each name so when checked, it copies that name and associated data in to a section below. This will give me a reduced list of names (lets say 20). From this section I would like the same again to reduce further and once more after that.
View 9 Replies
View Related
Sep 13, 2013
I have x number of sheets in a workbook, and I am looking to copy sheets a, b and c into a new workbook that I will create.
The a, b and c are in no order, or consecutive (although they could be). I want to be able to count the number of sheets in the workbook, and traverse through that to find sheets that I need, and select them to copy over to a new workbook.
View 1 Replies
View Related
Nov 30, 2011
I have a workbook with many tabs and I am writing a macro that works on the active sheet but needs to pick up data from another tab, which is labelled on the active sheet.
As I want to write this macro only once but different tabs have different tabs they look to, VBA code that slects the sheet named in a fixed cell on the active sheet.
This is the code that currently looks up to the tab labelled 'Cork, FA'. However, if this tab name is stored in cell AA2, I would like the code to choose the tab based on the information in AA2?
ActiveSheet.Range("A1").Select
ActiveCell.FormulaR1C1 = "=COUNTA('Cork, FA'!C)"
CountClients = Selection
Selection.ClearContents
View 1 Replies
View Related
Mar 26, 2012
Using Excel 2003
We have a spreadsheet set up showing a list of sales invoices, each invoice has the customer name and a customer reference assigned to it i.e B1, B2 etc
We want to set up another sheet that takes the sales invoice information but only picks up that which relates to a specific customer, i.e want a list of the invoices relating to B1
This will be done with a view to creating statements for each individual customer reference number which will just take info from these sheets B1,B2 etc
View 1 Replies
View Related
Nov 4, 2013
I have a data input sheet on a spreadsheet with a pick list where we can select an option, but I need another 'flat file friendly' option to appear on a second sheet where the data will be pulled from. For example
If on the front sheet Flat Roof Insulation is selected, it needs to return FRI into the other sheet, there are 45 options in the list.
View 1 Replies
View Related
Dec 19, 2006
is there any way to open a workbook and select a sheet within the book without having the entire name?
I've got a unique workbook and worksheet identifier but don't know how to use wildcards to get my macro to open the right workbook.
View 9 Replies
View Related
Apr 4, 2007
I have a main workbook that uses a macro to open a workbook provided to me from another department. This workbook contains a sheet that is basically a copy of the sheet in the main document and has the same sheetname and same codename.
The macro should copy the sheet data from the site workbook to the sheet in the main workbook. However, when i tell the workbook to select the sheet in the site file using its codename it errors....
View 6 Replies
View Related
May 12, 2014
I have dropdown list on E1=Round1, Round2, Round3. I have select Round1 and enter value in Cell A2,A3,A4.....A20. / Select Round2 and type values in cell A2,A3,A4.....A20. I want to copy these values to another worksheet and retrieve again when selecting Round "x"
View 1 Replies
View Related
Jul 11, 2006
I have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?
Sub Find_First()
Dim FindString As String
Dim rng As Range
'FindString = InputBox("Enter a Search value")
FindString = Worksheets("Template").Range("A26").value
If Trim(FindString) <> "" Then
With Sheets("Service Level Score Paste Sheet").Range("A:A")
Set rng = .find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
rng.Select...........................
View 8 Replies
View Related
Jun 30, 2006
I have 30 and above sheets in a work book and like that I am having 5 such
books. The sheets are named as 201, 202, 203 ....etc as per the contents in
that particular sheets. (201, 202 .....are the P.O nos.). all the work
sheets are of having similar format of datas.
Now what I need is if I want to look the details of one single sheet (say
324) I have go all the sheets one by one and it is hard to find out.
If any body give me a solution so that if I type a particular no. (forms
part of the name of the sheet) that sheet should appear for me.
View 12 Replies
View Related
Feb 21, 2009
I want to be able to select a cell, for example A10, this would then run a macro that would copy and paste several cells of information along that row and paste it on another worksheet. However, if i then choose a15, a3, a79 in turn (using the control key), it would run the macro using those rows in turn.
i'm looking forward to hearing if and particuliar how this could be achieved.
View 13 Replies
View Related
Nov 20, 2009
Run Time Error 1004 when selecting range on another sheet using a command button. I have created a command button that plays the following macro.
View 2 Replies
View Related
Mar 10, 2014
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
View 1 Replies
View Related
Jan 11, 2013
I'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.
I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.
I've pieced together some VBA code from other sources, which kind of does what I want it to:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range
[Code]...
But there are some problems:
1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.
2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.
This is my first time using VBA.
What I have so far is attached: testAutoPopulate.xlsm
View 2 Replies
View Related
