I'm attempting to write a macro that will select all the rows which contain a value in a specific column. Say for example, all the instances of "test" in column C, I need to select the entire row with that value in the column.
I should also mention that by using an autofilter, only specific row numbers are selected. The source spreadsheet is dynamic and will not always display the same value in the same row, and thus I need something a little more adaptable.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
I'm trying to clean-up a huge bulk of data. What I want to do is automatically select all rows, where column K contains text value "Closedloss", and have all these rows cut/pasted to Worksheet "ClosedCases". The second is similar to the first, but I want to select all rows where column J contains a value of 60-80, and have all these rows cut/pasted to Worksheet "MidRange".
I didn't create this. Anyway, the problem is that most of these cells will be empty unless a whole bunch of other stuff is filled. These N cells take several values, put them together and create a new one. As time goes by they are filled. While they aren't filled, they'll return the DIV/0 error.
So when that formula I pasted there uses all of these values, it also returns a DIV/0 error because it is getting info from cells that have this error.
I managed to correct that with this =averageif(N15:N357;"<>#DIV/0!")*100%
It works like a charm save for one problem. When I use averageif I'm forced to use an interval. Along this interval other values show up (it is always a value ranging from 0 to 2). So when the formula works its magic the results are slightly skewed because of this other value that I don't want.
So I figure there must be two ways around this. The first one would be using something like averageif that lets me use several handpicked cells instead of an interval. If I try
It doesn't work, it says I have too many values. So if I could the exact same thing as I did with averageif but keeping all of these values it'd be super nice.
The other solution, less nice but equally effective I guess, is using this same interval but having more than one criteria. The first criteria would still be the one telling it to ignore DIV/0 error, the second criteria would be the one to ignore any values equal or lower than 2.
I have a table of numbers to which a new number is added every day. I want to reference the last value in a separate cell. For example, in cell A1 I want to insert a formula that will look at Column B and select the last value. The values in Column B wil be added to each day, ie a new row will be inserted.
I want to select a range of rows 11, 14 and 23 to 24 in column j, plus the 2 rows to the right of column J and run a sum formula on the range. My procedure is selecting rows 11/14/23/24 and doing the sum for only column J. How do I make it so it runs the sum formula on all 3 columns. My code is copied below. I am fairly new to VBA.
Code: With ActiveSheet.Range(Cells(27, j), Cells(27, j)).Select Set sumRng = Intersect(Range("15:21, 25:25"), Columns(j)).Offset(0, 2) ActiveCell.Value = WorksheetFunction.Sum(sumRng) End With
I have a worksheet which is created monthly by one of our company's employees which reports results for that months operations and successful audits. These audits are separated into various service lines and on the report which is submitted it takes on the following format:
1|Service Line|Data A|Data B|Etc. 2|___CR_______| Data | Data | Etc. 3|____________| Data | Data | Etc. 4|____________| Data | Data | Etc. 5|____________| Data | Data | Etc. 6|___DD_______| Data | Data | Etc. 7|____________| Data | Data | Etc. 8|___MS_______| Data | Data | Etc. 9|____________| Data | Data | Etc.
What I want to do is use a macro from another sheet that has the effect of: While ServiceLine = "CR" copy the row of that line and move it to my monthly summary workbook, sheet 1. Then when the Service line changes to DD have the macro copy that information to the monthly summary workbook sheet 2, and so on. The problem is, if I test the Service Line column each time it will be an empty string the majority of the time and I'm not sure how to combat that with my If, Do, For, and While statements. As I've thought about it there are two solutions that I can think of: someone knows of a way to test the row only if it has information in it, or if there is a way that I can copy the service line information down until the change in service line so I can test Service Line on each Row.
I have a code that works fine, however only uses one cell as a trigger. I need each cell in column M to run the code, so at the moment only M6 will trigger, and not M7.
I m trying to make a button to add values to another sheet in my xls. Ive done that... now i try to autofill the percentages from left and above one row....
Currently I am using the Kickbutt VBA Find Function of Aaron, but I would like to have something that works more efficiently. What I currently do is (assuming all possible values for Column J are A - F):
although I just want some code that says: delete all rows except those that have "F" as content in Column J. I already tried something like:
Range("1:65536").Select For Each cl In Range("J:J") If cl.Text = "A" Or cl.Text = "B" Or cl.Text = "C" Or cl.Text = "D" Or cl.Text = "E" Then Rows(cl.Row).Delete End If Next
but it also takes much to long. The major problem I think, is that the number of records is variable so I search the entire worksheet...
Column A lists an account code on the summary line of each invoice. I'd like to copy this account code upwards for each individual line of the invoice so that I can summarise each type of charge by account code in a pivot table.
I'm a bit stumped as to how to do it. If possible I don't want to have to modify the data itself in any way so that I can paste new data in the each day without altering it.
I've started on the right with a CountA function for each row, which I was intending as a means to identifying the blanks rows and discount them, but it also showed up that each line requiring an account code to be copied returns a 4 and each invoice summary line returns a 9. I'm just not sure how to reflect this in a function.
I have workbook "Sheet1" that has many rows and columns with values. Could I have code to find the cells value "plant2300" in column A and copy all the rows in column A that has the cell value "2300" into workbook Sheet2 (also copy with headers from Sheet1 to Sheet2 row 1).
I’ve got a spreadsheet with approximately 30,000 rows and I would like to create a macro which hides every row which has not the value 12, 14 or 19 in column I. What is the best way to do it? With an if statement?
I have a spreadsheet with columns and columns of data. What I'd like to do is identify which rows have blank/no data in all specified columns (H, K, O, S, U, W, and Y).
To clarify, I need to identify each row where all of these columns are blank (as opposed to each row where at least 1 column is blank).
I need generating 40 rows (Columns of 17 (Columns A - Q) Random numbers (1 to 5) that will sum to specific values (60, 55..) in R Column, and to regenerate it on pressing any key.
The same has been done for one value in [URL] ..... but I need it for a set.
Say I have two worksheets, "Sheet1" and "Sheet2". Let's also say A1 in Sheet1 could have one of four values: cat, dog, rabbit, mouse. Now, based on which value cell A1 on Sheet1 is, I need different rows hidden in Sheet 2. For argument sake let's say if cat is chosen rows 1-5 are hidden, if dog, 6-10 and so on.
I'm finding it hard to explain what I am trying to do (which may be why I can't find a solution through Google), so I have an example. I am using a much larger spreadsheet than this sample(18,000 rows)
ID First_Name Last_Name Company
[Code]....
I want to highlight rows if there are multiple instances of ID and # values - I included a column at the end showing which rows in this data set would be highlighted.
I need to move a number of rows, based on user input in front of the first column, continuously until it 'flattens out' into one row.. And then do the procedure again for the next row Kinda hard to explain.. maybe i'll use an example using this matrix :
I am trying to develop a macro that does the folllowing
1) Takes the value from a specified column of a sheet in the workbook and sequentually go the the values of that column and compares those values to another sheet in the workbook
For ex: sheet1 in column A row 1 has string value abc123 and sheet2 column A row 1 has value 123abc. I want to compare these two values from different sheets.
2) However if the values don't match I would like to take the value from sheet1 and see if it is in the list on sheet2.
3) If the value from sheet2 isn't on the list from sheet1 then paste that row information to sheet3
So far this is what I have. All it does now is go through both lists and compares the values but I am not sure how to single out those values for conditional formating. I am sure that the singled out values will need to be derived dynamically since I won't know what or when the values will be up for conditional formatting.
Dim LoopCount As Integer Dim RangeCount As Integer Dim CellVal As String Dim CellIncrement As Integer Dim ErrorCount As Integer Dim PasteConfirm As Boolean
I am working on the attached price proposal and need my user to be able to enter a number into column E indicating that that row should be printed on the quote. The 'quote' can be new sheet or another area of current sheet that is formatted to look like letterhead.
I Need to loop through col W Used range except the last row which is totals or the first 4 rows which is Heading stuff, and if value > 0 post it to a column on the right based on the day code. ( 31 values 1 for each day)
I have these specific rows (2,3,4,6,43,44,45,63) which I would like to copy and paste it on a designated sheet. But my problem is, the column varies depending on the YEARS.
I do have codes for it, the one I got from the recording. I just do it for all of the rows (formula pasted here) until all of it copied on the summary sheet. However, when I finally finished it and I run it. I could see the movement form One Sheet to another and its not good.
A code that I could use for my better understanding of MACRO.
I have some specific procucts in coloum A in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
Sub SearchForString()
Dim LSearchRow As Integer Dim LCopyToRow As Integer
I have some specific procucts in coloum A(a2, a3, a4, till a50) in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
I need a code that will go thru column C and delete the whole row if cell value is 78315, Also it needs to shift the the rows up so there is no empty rows wheneverything is done done. I used some codes but they take forever to go thru whole sheet.
