New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
Column 1 has 1200-1209,1300-1350,1523-1563 Column 2 has 1400-1409,1600-1650,1823-1863
I would like to take the range of e.g. 1200-1209 and have excel put 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 into separate adjacent cells for me. And be able to do this for each column/cell of data I have like this.
If this has been requested already, I apologize, please direct me to the right thread and flog me with USB cable. I've been searching the forum for an answer for a couple of hours now for the answer to this:
I have a list of words in column A on a sheet and I'm trying to write a formula on another sheet that will check all cells on a pre-populated row and return a value if any of the words from the list on are contained in any of the cells in the row. I've attached an example spreadsheet
I want to separate them into several cells. Each cell can only have 30 characters or less. You can not cut it in the middle of the data.
After your separate B1 should be "C102, C110, C114, C116, C118," (30 characters) C1 should be "C120, C125, C128, C130, C131," (30 Characters) D1 should be "C132, C134, C135, C139, C140,"(30 characters) E1 should be.......... till the end.
I try to several functions too. But it does not works.
I have been sent an export from Outlook in a .csv file. The Body of the Email is all contained in one cell for each row (each email detail) and is in the following vertical format within the cell:
Column Header blank row Data blank row Column Header blank row Data blank row
....and so on. I've tried to do something using Transpose and Text to Columns, but I've not been able to successfully seperate out the data into a useful format in Excel. The data are responses to a website and contain Account/Contact information which I hope to be able to import into a CRM system as new Leads. way of extracting this information, so that I can get each row into a format that gives me the column header with the related data below, as you'd normally expect to see in Excel?
I need to get the string GE#### before each " class="button"> and copy it on a cell on the right. There are other links of this format [URL] ..... in the cell, but I am interested only the ones that have " class="button"> after it.
The length of the ID after GE can be 2, 3, 4 or 6 characters long. But I am ok with getting GE + 6 characters following it as that means I would get something like GE12" cl and I will delete the extra character by doing a find/replace.
I'm working on a spreadsheet that includes items I sell as well as the packaging it goes in.
The formula I'm looking for basically will tell a cell that if one cell (# of box) is equal a certain # it will add two separate cells by the weight of the box.
I have cells for each of the following: Weight in lb and weight in oz of the item (no box), a cell which holds the number of the box (ranging from 1-15) and two cells with weight in lb and weight in oz which would be the total weight of the item + box.
So, for example, if weight of item equals 1 and box cell equals 2 then it will put the weight of item + weight of box into a third cell.
Here's a picture of my current spreadsheet : [URL] .....
Basically, I would like to do something such as if P3 = 5, then Q3 will equal N3 + U6 and R3 will equal O3 + V6.
This is where you introduce yourself? I make lists for my gf's dad's company using excel. One of my most excruciating tasks is to separate the first and lasts names from one cell into two cells. Does anyone know a quicker way to do this other than manually? I have 10,000 names to do and it's going to be hours if I do it by hand.
The database that I'm working on divides patient names into three separate columns: lastName, firstName, midInit. My department has several old spreadsheets that have data my boss suddenly wants included in my database. The trouble is, these old spreadsheets have the patient's last name, first name, and middle initial entered into the same column.
There are at least 200 hundred names in these spreadsheets. I absolutely do not want to go back and separate the names into separate columns by hand.
Is there any way to get Excel to take the names entered into one cell and split them into three cells?
I've attached a spreadsheet example that shows what I need to do.
I use Excel 2003. I need help building a macro, please, that will copy data to a specific page in another workbook based on two criteria. Here's the deal:
The data in Workbook A, Sheet 1, Cell A1 may contain the word ALPHA, BAKER, or CHARLIE. Cell A2 may contain the number 1, 2, or 3. Cell B1 contains the data I want to collect from various Workbook As and keep in a list to analyze.
Over in Workbook B, Sheets 1 through 3 are named ALPHA, BAKER, and CHARLIE. Rows A, B, and C are titled 1, 2, and 3.
How can I copy the data from Workbook A, identified as ALPHA 3, to it's place in Workbook B, Sheet ALPHA, Row C?
Furthermore, Workbook A is a one time form will be used many times. Thus, when I copy B1 to Workbook B, Sheet ALPHA, Row C, I need to paste the data in the first empty cell in the row.
I receive a large spread sheet weekly, one or the column contains comma separated values (CSV), I need to separate those values 1 per cell. Maximum CSV is 5; I would need to get the output to 5 cells next to them, Example,
I have a sheet labled Parsed and a sheet labled Prices. The Data on the Parsed sheet is in W2:W1000. the data on the Parsed sheet, can have anywhere from one value to up to ten values in it. (again all sparated with a space.) the data is separated by a space between each number value. I am trying to find a way to take the values from Parsed!W6 for example and separate the data into the prices sheet in to different columns. Some cells may be blank.
I need to return a value from a cell in Column H, but with a row number that varies with each entry.
I repeat this formula every 5 rows or so. But the cells referenced on another spreadsheet are only one row apart. Because of this discrepance, when I copy my highly developed cluster of formulas, they only reference every 5th entry on the other sheet. What I've been doing is manually altering long, complicated formulas by hand. I can't do a replace function because every once in awhile it'll find an extra instance of the digit I'm replacing and mess up parts of the formula I don't want changed. I could avoid this tedious, time-consuming work-around if I could make a formula that would do something like this:
=Display Value from in column H: (row number per cell B1)
And cell B1 would include the number 3789.
So the returned result is the value from cell H:3789
I want to use a value in one cell as a row designation, and a value in another cell as a column designation. Ultimately, the values will be text which will refer to row and column headers. What formula would allow me to do this? example:
A1 contains B B1 contains 2 B2 contains "tribbles"
Now the problem, Each client has a sheet in a workbook. In each sheet, I input the number of days of service available to that particular client in a single cell. We'll say cell [G8] is the cell used for this input in all sheets. If the client has 30 days of service available then we type  in cell [G8]. Each sheet is a 100 day template. I want to shade in dark grey and lock from input the days NOT available to the client based on the days of service input in cell [G8]. If 30 days of service are available in cell [G8] then the remaining 70 days on the 100 day template would be shaded dark grey and locked from input. That is, day 31 through day 100 of the template would be locked and shaded. Each individual day has multiple cells in a column. I want to lock and shade each column of cells in each day not available.
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
I have four cells that contain text. All have connected check boxes with TRUE FALSE.
I need to be able to select anyone one of these cells with a check box, and have it's text appear in one separate cell eg: A1.
I have no issue connecting check boxes etc. I have no issue reproducing the text from any of these cells into multiple cells with a check box. But they have to be selectable and reproducing in one cell only (eg"A1").