I have a large block of text containing hundreds of serial numbers that I want to extract from the text into their own cells. If I paste the text directly into excel then the whole lot goes into 1 cell. The serial numbers I need are individually wrapped in brackets so I wandered if it was possible to paste the block of text into excel using both '(' and ')' as value seperators.
View 3 RepliesI have a column that contains 2 different types of data, "repairs" and "engineering". how do I seperate the 2 into two seperate lists?
View 9 Replies View RelatedI am copying data from a PDF. The data I need is in columns, spread over hundreds of sheets. I would like the data in the same layout (columns), but need it in excel instead of the PDF sheets.
I've tried copying and pasting into Excel, but the problem is that what is in columns on the PDF ends up as multiple rows beneath eachother, all in column A, on excel.
I've tried Text to columns, but that seems to only work if all the data you need to seperate is in the same row. What I need to ultimately appear in one row is currently displaying in three rows, one beneath the other. Is there a way for excel to automatically move what's in cell A2, for example, to B1 (and do this for all data, all the way down the sheet, that's similar to that currently in A2?
(If it would be useful for me to post a screenshot, could someone reply with how to do that in the most version of Excel?)
I have a phrase in a listbox formated as such: "Company Name / Company ID # / City, State"
I need to be able to seperate the values out into seperate categories:
Company Name
Company ID #
City
State
Is there any way to do this within the code?
Is there any formula or formatting (not a macro) that will list in a seperate table all names that occur equal to or more than a specified number of times?
eg: I have a list of names(below) that I want excel to go through and automatically place the recurring names in a seperate table.
Gus
Bob
Mike
John
Gus
Nick
Mike
Gus
So Gus and Mike would be listed in the other table.
I have hundreds of file names, and to cut a long explanation short, they are exported as a CSV file to excel. In order indentify the owner of the file I need to rename the file with a commar where you see the dash or the underscore in order to have the name appear in the next cell, as can be seen with Syma and Kevin below, so I can then sort the columns etc etc.
I know there is a formula that I can use to achieve this, ie have syma.pdf and kevinc.pdf in the next cell.
I think it works on identifying how many characters along the name and then send i to the next cell.
as you can see below, there is no set amount of characters to put into a formula.
Could I say, for example, if after dash /underscore put next word in next cell?
t5 mon a2 w6-syma-0003.pdft5 mon cst w2_dellwynneh.pdft5 mon a23 w3_MASUMS.pdft5 mon cmn201a w1- syma.pdft5 thurs wiabe w2_kevinc.pdft5 thurs wiabe2 w2_kevinc.pdf
I have some data that is seperated by spaces. I need to split the data so each is in a seperate cell and then remove the spaces. I can do this if there is only one space inbetween the data, but that is not always the case. I attach a workbook with examples.
View 6 Replies View RelatedHi, Column C has a bunch of addresses that have no spaces between the number and street. (27smith lane instead of 27 smith lane). Is there a way for me to quickly seperate the number and street name from the preceding number in each cell of column c? There are 1075 cells in column C.
View 10 Replies View RelatedI am posting the worksheet so that it may be a little clearer. I have 2 worksheets, the input area and the model area.
In the input area, users will input their data with a maximum of 5 beverage items and 10 food items along with a certain number of other data inputs.
In the model area, i would like to seperate the food items from the beverage items along with their corresponding other information as you can see in the spreadsheet i posted.
However, food items can vary in number up to 10 as well as beverage up to 5. Also, users may enter the beverage and food items in any order they wish to.
Could you help me figure out a way to transfer my data from the input area to the model area and sorting the beverage and food items so that beverage and foods go into their specific zones? i will be performing calculations which are different from food and beverages.
I need to separate alphabets and numbers in a string ...
Example,
Hotel Crowne Plaza 675.00 USD
How can I read only the numbers (675.00) ???
I have a 25k line spreadsheet w/ 37 columns in use. The spreadsheet is organized by sales rep among others data. Is there a way i can insert some kind of command to auto seperate or copy all the data associataed w/ "rep1" into one tab, then "rep2" into another and so on?
View 7 Replies View RelatedI want to do is take this kind of thing all from one column:
COLA
1 blah blue
green
13 black grey brown
and put it into two columns, one with only the numbers, and the other with only the text.
COLB
1
13
COL C
blah blue
green
black grey brown
Also, I want to be able to then take that data from COL B and C and have it raw so that I can edit it easily by simply selecting row3 in COLB and change it from 13 to 4 (or whatever.)
I have a cell that contains a random number, spaces and other random numbers and at the end of this are words that name up a customer name.
Is there a formula that I can use that would just extract the letters only (i.e. the customer name)?
What If we had to replace any number..
Lets say, if we had to seperate NUMBER TEXT NUMBER in different combinations....
B2 contains values like these then
TOM CRUISE 12
TOM 5879 CRUISE
TOM CRUISE 123456789
123456789 TOM CRUISE
123 TOM CRUISE 456
[ = SUBSTITUTE(B2,"1234567890","") ]
I am at my wit's end pondering over it?
How to make the SUBSTITUTE function work for each individual digit?
I am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
I have set of data in multiple range ,need to fill the and replace the old values depends upon two column values (AH & AL)
IF Active Calls is "TATA" In AH:AH, and IF Action Onwer Col is "Blank",in AL:AL
Then Fill the Blank cells by Values "SVC" in the col Action Owner,Then Replace Old values by "Updates Awaited" in Status Col(AM:AM)
Find the attachment & basic code take this code for this task
[Code] ....
toggle-2.xlsb
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
1. Using a formula, I am trying to to obtain a list of unique values (string) (caveat: see #2) from the range E2:E10000 (arbitrarily chose 10000 - the row number is variable)(see #3).
I currently have a formula that seems to work for this purpose but I don't know how to add the condition in #2 (below)
2. To include all unique string values except those starting with the letters "IC"
3. Is there a way to make this formula so that it can only seek values up to the last row, and not go to the 10000th row if not necessary? The E column has no empty cells until after the last row that contains data.
Here is the formula I currently use which serves #1 (above):
[Code] .....
Any way to improve/simplfy this formula for the purpose describbed in #1? How can I add the condition in #2? Can you see a way to include #3? The most important issue here is #2.
Example of desired results:
Column A | Column B
AA | AA
DD | CC
AA | DD
CC |
DD |
DD |
IC |
IC |
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.
Formula:
[Code] ....
I have data similar as shown in the following:
A1A11
B2AA1122
C3B22
D4C33
D44
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
A111
AA1122
B222
C333
D444
the third column always will have at least the same letters as the first column, but new letters/entries can occur.
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
compare some list of values in order to fiind the common values.
View 1 Replies View RelatedI am working on creating a spreadsheet that can be updated by those unfamiliar to excel. I have a master list on one sheet and three separate lists for business, individual, and general. Each list has three columns giving name, address and postal code. There are numerous repeats on these lists and I wanted to hide any duplicates while keeping my cells aligned. So far I have been able to highlight any duplicates, but was interested in some function that would save at least one duplicate while hiding any additional ones.
View 2 Replies View RelatedOne aspect of my Excel-based project involves comparing the operator-entered part number (in Excel) to a predetermined list of part numbers in one column of an Access database table. Right now, my program is telling me that every part number entered in the spreadsheet (50+) does not match any part number in the database, which I've verified to be incorrect. I've checked that both the spreadsheet part number and the database part number are of the string datatype.
To the best of my knowledge, my looping logic seems valid and robust. To the best of my knowledge, there are no hidden characters in either the database cells or in the spreadsheet cells causing this apparent mismatch. I'm completely stumped at this point as to why my program doesn't detect any matches between the spreadsheet and the database table. Below is the Sub containing the code for checking that the part numbers match:
[Code] ....
This issue seems to be a hybrid issue between Excel and Access with (to me) more of the issue on the Access end.
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.