Set Automatic Calculations With Selection Of Sheet
Jun 17, 2007
I have a sheet that I need to turn on auto calculation when selected. The problem I need to turn on auto calculation as well as sort another sheet "test" I do not know how to as the other portion of the code. attached will not work because it just runs in circles.
Private Sub Worksheet_Activate()
'THIS IS A SEPARATE SHEET THAN WHAT I NEED TO SORT FROM
Application.Calculation = xlCalculationAutomatic
Sheets("6180").Select
Application.Run "'BILLET-SLATE P414D working copy.xls'!Sortbypeprorprd"
End Sub
View 5 Replies
ADVERTISEMENT
Dec 10, 2012
I have a huge spreadsheet requiring me to manually enter alot of fields with formulas. I am using the formula
=COUNTIFS('A1'!C10:F11,Statistics!K5)+(COUNTIFS('A2'!C10:F11,Statistics!K5))+(COUNTIFS('A3'!C10:F11,Statistics!K5))
The full formula is quite long as this pick up the data off over 300 work sheets. (there's probably an easier way to do this aswell) When I copy or drag this to another cell with on the same worksheet it gives me the correct formular with the correct cells changes as I want. However this formular does not work. I have auto calculate on and I manually press enter on the cells and still nothing. If I change the following for the entire formula (about 8min to do each cell) it works
=COUNTIFS('A1'!C10:F11,Statistics!K5)+(COUNTIFS('A2'!C10:F11,Statistics!K5))+(COUNTIFS('A3'!C10:F11,Statistics!K5))
Is there an easier alternative then manually changing each number?
View 9 Replies
View Related
Mar 31, 2007
I'm using excel 2000 and I just noticed something and am unsure how to change. I guess early on my building of a workbook I accidentally left calculation to manual. I would like to change calculations to automatic on permanent basis. I keep changing it and it changes back to manual after I close then reopen the workbook. I would prefer to change permanently to automatic....Any ideas would be a bonus. On all new workbooks I can save in automatic but I cannot change from manual to automatic.
View 4 Replies
View Related
Jan 4, 2014
Please find attached a daily copy of a spreadsheet that is used to monitor train running times.
The columns on the left - "Serv No, Serv Start Date,Train No:, Scheduled Arrival, Scheduled Depart" are provided to us automatically and the underlying cell formatting/formula cannot be changed. This information is cut directly from a daily report sent to us the previous day. The cell formatting for the start date is custom - dd-mm-yyyy hh:mm.
The sheet is usually locked out with user access only to the left hand side to cut and paste train times in and the input columns on the right hand side. User has no requirement to adjust any details in the left had column apart from to add additional trains at the bottom is need be. I have left the loaded sheet blank and complete with all underlying cell formatting, conditional formatting and formulas intact for you to play with.
Both sheets essentially do the same thing so whatever formula changes are made to the empty sheet can be adapted for the loaded sheet.
For simplicity, I will focus on the empty sheet. What I am mucking around with is having the user input the train arrival time in the "Actual Arrival" column - (column F)
What I am looking at then making occur is the spreadsheet automatically filling the adjacent columns with the appropriate text and calculations.
To do this excel needs to compare column the number (cell input is text formatted) as a number with the arrival time in column G. It then needs to calculate if the train is Early (16 minutes or more before scheduled arrival), on time (+/- 15 minutes either side of scheduled arrival) or late (16 minutes or more after scheduled). It then needs to automatically place the letter "E", "O" or "L" in column K and the time differential in column L.
My problem is two fold.
Firstly, I cannot seem to make the spreadsheet automatically enter a letter into column K depending on the above conditions.
Secondly, I have had limited success in having the spreadsheet compare column J with column F and working out the differential. However, this only works if the time remains linear. IE only if the train runs on time or late. It gives an incorrect time differential if the train is early. I will attach this spreadsheet tomorrow as an add on to this post.
DAILY TRAIN RUNNING.xlsx
View 3 Replies
View Related
Oct 14, 2008
I'm trying to create a new spreadsheet to keep a record of orders recieved.
the example attached. What I would like to do is:-
Enter data in the Order Sheet (Sheet 1) under Column C, from a drop down menu taken from Data Sheet (Sheet 2) Column B. I then want Excel to filter the items available from Sheet 2 that correspond to the colour chosen, and once that has been done, I want the part number to be automatically entered.
For example, I order a Red pen, I type/select Red in C2 in D2, I then want Excel to only show the items related to the Red pen Fine nib rd123, Medium nib rd234, Thick nib rd345.
View 2 Replies
View Related
Nov 16, 2009
Immediately a chart is added, excel chooses it's own data to plot. How do I suppress this?
View 5 Replies
View Related
Dec 12, 2013
I am writing a simple application that allows users to enter an item ID and execute a find. If the data is found, the UserForm populates with the pertinent data for the requested ID otherwise a message indicates Item not on file. The file being interrogated is an Excel workbook with multiple functions, unrelated to my task.
The problem: When my application opens the workbook to perform the Find, the screen displays a message generated by Excel, informing the user that the workbook contains links to other data sources and requesting to choose to either Update or Don't Update those links.
I used the Application.DisplayAlerts=False line but it has no effect on above. The choice I always make is Don't Update and the macro continues to the end without further ados.
Is there a way to either cancel such a screen request or automatically select a given option?
View 2 Replies
View Related
Mar 25, 2013
I was wondering if there is an easy function that would copy only some part of a list as if like I select a category.
Let me elaborate. As in a previous post i have a list of apartments and a set of categories (locations, tube stations, number rooms, distance to tube stations, etc).
I want to get all the items that are the same from a category and post them automaticly on another sheet to single them out, for instance all of them that are on Liverpool Street station or all of them that have 2 rooms.
Is there a simple way to do this or do I have to get a macro to read my whole list? I ask cause I am continuasly updating the list and don't want to recreate the formula all the time.
View 6 Replies
View Related
Dec 27, 2012
So I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
View 4 Replies
View Related
Feb 6, 2010
Attached is a layout that I am trying to get working.
the 1st tab is the input sheet, I want to be able to post input on that sheet and have it transfer to the other tabs in the appropriate fields.
I'm having a problem mostly with the vlookup to get the data into the right cells on the other tabs.
View 2 Replies
View Related
Dec 13, 2006
My 10 MB excel file has calculation mode always automatic. It has 100 worksheet. Only a few of these worksheets are enable for calculation, for performance optimization.
Therefore, I use the macro: Worksheets("sheet1").EnableCalculation = False
When needed, I do: Worksheets("sheet1").EnableCalculation = True
Unfortunately, from time to time, the calculation does not work. By chance I realize that by insterting a cell in this worksheet, the EnableCalculation became active. My problem is that I feel this is happening randomly, depending on worksheet, maybe depending on users or on sequences of entries.
View 4 Replies
View Related
Mar 28, 2014
how to merge data automatically in one sheet (master sheet) from specific sheet with different name sheet but same format?
Adding, deleting or editing should be automatic update to master sheet.
For example:
Sheet name:
Sheet 1: Salesman 1 - with data range A10:F310 (as his data file)
Sheet 2: Salesman 2 - with data range A10:F310 (as his data file)
Sheet 3: Salesman 3 - with data range A10:F310 (as his data file)
Sheet 4: Salesman 4 - with data range A10:F310 (as his data file)
Sheet 5: Salesman 5 - with data range A10:F310 (as his data file)
Sheet 6: Salesman 6 - with data range A10:F310 (as his data file)
Sheet 7: All Salesman - - with prepared data range A11:F2000 (as master data file/record for 6 salesman)
Column Name as a Header:
A10: Customer Number
B10: Customer Name
C10: Salesman ID
D10: Promotion Type
E10: Promo Item
F10: Free Item
View 2 Replies
View Related
May 13, 2014
I have an automatic macro that runs from every sheet but is only based on one sheet. I had to protect the worksheet and in order to make the macro work I had to add an unlock and a lock code. The problem now is every time a user enters something it looks back to the other sheet and then comes back. Is there a way to prevent the user from seeing this. See code below
Private Sub Worksheet_Calculate()
Sheets("Profit Calc Local Currency").Unprotect Password:="hspricing1"
Application.EnableEvents = False
Dim lr As Long
lr = Cells(Rows.Count, "XEA").End(xlUp).Row
Range("$XEA$1:$XEA$" & lr).AutoFilter Field:=1, Criteria1:="1"
Sheets("Profit Calc Local Currency").Protect Password:="hspricing1"
Application.EnableEvents = True
End Sub
View 5 Replies
View Related
May 25, 2012
I have a nice little matrix which looks up loans and tells me the status of various modules within them
It looks something like this:
Code:
=IFERROR(INDEX(AssignedLoans,MATCH($H$6&$D49,ModuleName&LoanNumbersList,0),8),"")
and it is an Array.
Now, it is working fine until it gets to row 50 then it stops returning values. What's up? There is no difference between the rows except for the loan number change (from D49 to D50...etc). I looked up the loan number in the source document and it's there, so it's not that the source document is missing the information.
View 4 Replies
View Related
Sep 22, 2004
I need to calculate the total hours worked for a series of 22 locations. Each Location has weekly allocated hours ranging form 0 to 80.
For example:
User1 worked 4 Hours on Monday at Location1 and 4 Hours at Location2.
User2 worked 4 Hours on Monday at Location1 and 4 Hours at Location3.
I am assuming I will need to use VBA for this calculation.
View 9 Replies
View Related
Jun 30, 2014
Is it possible to loop through a list of sheets and execute some calculations that have sheet references from a different list of worksheets? For example, you have a list (list 1) of your worksheets, which will be the destinations of the calculations, and you have a second list (list 2) of worksheets that the calculations are based on. So, lets say there are sheet1 and sheet2 in list 1, and sheetA and sheetB in list 2. The calculations based on sheetA would appear in sheet1, and calculations based on sheetB would appear in sheet2. I thought the code would look something like this:
Code:
Sub LoopthroughWorksheets()
Dim sheet_name As Range
Dim sheet_name2 As Range
Set sheet_name2 = Sheets("WS").Range("F:F")
[Code] ......
I'm getting a "Run-time error '1004: Application-defined or object defined error" at this line:
Code:
.Range("K1") = .Range("sheet_name2.Value!A14").Value
View 2 Replies
View Related
Nov 5, 2008
I have a report blank that is comprised of numerous excel worksheets (fixed letter size). During the completion of the report, one may add, delete, and/or move worksheets. I want each worksheet to have a cell that dispalys 'page # of total number of sheets'. Is there a way to automatically update this information?
View 4 Replies
View Related
Dec 16, 2009
It i a sheet to calculate my nutrition. But since the sheets has grown to get bigger and bigger (and fortunately me as well ) some bugs has started to appear. This is really annoying and I have to use another sheet with less values in it which I can use manually on the side since it seams to only work properly when less values is entered in the sheet.
Open the file attached. The first sheet called "oversikten" is where you can see the trouble. The gray fields you can edit freely and in these fields you should be able to insert a type of product (food) which also is in the list in the nexy sheet called "produkter", and the first sheet should then automatically get the values for the written product given you have written the exact same word as the product in the list (list: in the "produkter" sheet). But for some reason this has stopped working. Now only a few in the beginning of the list is working as it should and most of the products will not be transferred to the first "oversikten" sheet. I've only copied codes and stuff so I have no idea what is wrong and how to fix this.
fix the codes in the program so that any product written in "oversikten" will get its correct values transferred from the "produkter" sheet for all the registered products now and for the new ones I enter in the future. I love this little nutrition program of mine.
View 11 Replies
View Related
Nov 3, 2008
I have only two sheets..first sheet is the user sheet where the user gives the data...second is the sheet where in we get the result according to user given data..
there is a cell in User sheet where User gives a Number. for example " 8 "
so sheet2 : here we have only 9 rows. as user gave "8" the fisrt 8 cells in the first column should see like this
B 01/08 , B02/08 , B03/08 as so on till B08/08
when user gives 9 in user sheet
then the first sheet is finished with all the 9 rows ending with B09/08
when user gives 10...then sheet 3 should automatically appear with the first row and first colum saying B10/08.
when user gives 20 in user sheet...then sheet4 should appear with last number as B20/08
so each sheet is having only 9 rows..
first sheet ends with B09/08
second sheet ends with B18/08
third sheet ends with B27/08
View 13 Replies
View Related
Jul 31, 2009
I have an excel workbook with two sheets. Sheet 1 has a list of people names, rank, address, and phone numbers. Sheet 2 has boxes where a user can select a last name from all last names in sheet1. What I want to happen after the user selects the last name in sheet 2 is for it to automatically fill in the rest of the data (ie Rank, First Name, Address, city, Home phone number, Cell Phone number). What do I need to do in order for this to work?. Attached is a very small example of my much larger project.
View 3 Replies
View Related
May 18, 2013
How do i do the automatic linking on the excel sheet like the one done on the following example
Book1.xlsx
View 1 Replies
View Related
Jun 14, 2007
What I have got is a list of exams and subjects on the first sheet from cells A3 to A whatever. This list varies in length from a few exams to many dozens.
Under each exam is a list of subjects.
i.e.: Under the math exam is addition. multiplication, division etc
On columns B through ZZ and beyond. I have individuals names.
Under those individuals names (opposite the exam row) I have pull down boxes saying if the individual has passed failed or did not sit .. etc.
What I would like to be able to do is to automatically generate a second sheet with the individuals name on it with a report of what exams they took with what result. Of course it would be nice it was nicely formatted with the headings of all the different exams and the subjects taken arranged in order.
If an exam was not taken it should not appear in the generated sheet
I have a fairly good knowledge of Visual Basic though I have not had much to do with VB for scripting.
View 11 Replies
View Related
Aug 8, 2009
When I creating a Pivot Table Report on a different sheet. I have attached the Stock Report, where I have created a Button at the top to create the report, but the worksheet name is the default Excel name rather than the one that I want (in my case the name of the new sheet should be "Admin".
View 3 Replies
View Related
Aug 9, 2013
I am trying to make some sheets with football teams from one championship and their results. For example i will have a match between TeamA vs. TeamB that will end 0-0. I will enter this value in the sheet for the TeamA results but normally this value will also be found in the results sheet of TeamB.
My question is, how can i make excel copy this value once i enter it for TeamA in the results sheet for TeamB.
View 2 Replies
View Related
Apr 7, 2011
I have multiple sheets all of which are identical except for the number of rows containing data. I have been trying to create a macro to update these sheets into one 'Master' sheet but I'm having great difficulties due to me needing to leave Column A and Row 1 blank.
I have uploaded example data of what I am after, sheets 2 - 6 need to be automatically updated to the 'Master' sheet when the macro is run.
View 6 Replies
View Related
Mar 29, 2014
At work I have a register/log. Its just a printout of a standard format in excel sheet. I print a month of sheets at a time and write the day and date on it by hand at the top. Is there some formula in excel by which it prints the dates as well in a progressive manner. Eg. If today is 29th May 2014 and today I print 30 copies of the register/log. The first copy has todays date on it and the the next one had tomorrows date....and the 30th copy automatically has the end of April 2014 printed on it.
I've found this code but cannot get it to work.
My workbook is called Shift Log, the worksheet is called v2 and I'm using Excel from MS Office Professional Plus 2010 (32bit)
#Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, _
ByVal Target As Range, Cancel As Boolean)
Dim sDate, i
retryDate:
sDate = InputBox("Enter the starting date, or click 'OK'" & _
" for the current date", "Start Date")
[Code] .........
View 3 Replies
View Related
Aug 17, 2014
this is a competition scoring sheet
i want to add this automatically
when i enter chest number then the name of winner and team name want to come automatically and the pointing also (see sample)
point first 5 point second 3 third 1
how to do this
View 7 Replies
View Related
Aug 12, 2008
In sheet1 (SA Awards) I have the source table for my pivot table in Range ("A1:G50"). In sheet2 (Team Listing) my pivot table is located in Range("K2:S13")
When I make changes in sheet1 I need my pivot table to update, I recorded a macro to refresh, however have only got it to work via a button & only if Sheet2 is unlocked
Sub PivotTableUpdate()
Sheets("Team Listing").Select
ActiveSheet.PivotTables("PivotTable8").PivotCache.Refresh
Sheets("SA Awards").Select
Range("B2").Select
End Sub
1. How can I get this to work in the Worksheet_Change Event?
2. How can I password protect Sheet2 & still have it work?
View 3 Replies
View Related
Jan 13, 2014
I want to select an automatic colour scheme (font) for an Exel sheet. It has 3 columns with values. If the coloums are A, B & C I want to mark the higher value in red. If B is higher than A, B should be red. Again if C is also higher than B, then C also should be red... like that. Values should be read row-wise. How can I do this using a formula?
View 1 Replies
View Related
Jan 17, 2013
I have a workbook with so many sheets as the working days of a month. I also have a Master sheet.
The sheets are named as the dates. Example: 020113 , 020113, 030113......etc
In the Master sheet, first column has ALL working dates of the month(i don't care about Holidays).
First row of this sheet are headers.
My goal is from the sheet of the certain date of the month automatic copied certain cells values(same in eatch sheet) to certain cells in Master Sheet.
View 7 Replies
View Related
