What I basically have is 3 columns of data, A,B,C. Every two rows are a matched pair (e.g row 2&3, 4&5 etc)
I am trying to organise this data into columns E,F,G.
For all rows, if data in Col C is "A", I would like to copy the data in Col B to Col F
For all rows, if data in Col C is "B", I would like to copy the data in Col B to Col G
Then copy data in Col A to Col E
Also, the data in Col A represents different cases, so 1 is the same case, 2 is the next case etc. As you can see different cases have different numbers of entries.
I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
I have a name in one column and the data in another. I am trying to match the name and the category and turn the column data into a row data. I have attached a sample of two sets of data since my explanation here may be lacking. Orriginal data is in columns A and B. Basically I think I need a double text lookup (matching the name and category) and put the data in a row format.
I have created a simple account list with - date - detail - category - amount.
How can I automatically list each transaction in date order by category on other pages. Each category is represented by a letter - e.g. 'T' for travel. In this example I want to list all travel transactions in a separate list in date order on another page for easy printing.
I have made a Summary page for each category but cannot work out how to make a detailed list for each category.
I need a formula to count list items if the date is between a specified parameter. I am trying to count how many help tickets were logged for a particular group or bureau during a specific week.
How many AA's between 12/1/2008 and 12/8/2008?
Bureau Date Opened AA12/1/2008 AA12/1/2008 AC12/2/2008 AA12/6/2008 AB12/12/2008 AE12/15/2008 AC12/16/2008 AD12/17/2008.........................
I know how to count a list of items when you identify what you want it to count (I11 (Access)) and where (Application (Named Range)) but I can't figure out how to include the date parameter.
I J Access23 =COUNTIF(Application,I11) Acrobat2 ADMIN4
DATA: list of films released by year, with box office totals and genre
GOAL: Function to sort data by year, then displaying how many films in each genre were released each year. E.g. horror comedies, romantic films released in 1981, 82, etc
Is there a function, or series of functions, by which I can do this without having to sort through manually?
I havet he following code which sorts data. If there is no data to sort I keep on getting a run time error. Could I add something to my code to prevent the run-time error, as sometime there won't be any data to sort. The code runs when I switch to the worksheet in question.
Sub SortMeetings() Dim iCTR As Integer Dim yCTR As Integer Dim zCTR As Integer
zCTR = 11 For iCTR = 12 To 23 For yCTR = 1 To 10 If Len(Range("D" & iCTR).Offset(0, yCTR)) 0 Then Range("AA" & zCTR).Value = Format(Range("D" & iCTR).Offset(0, yCTR), "HH:MM") & " " & Range("D" & iCTR).Value zCTR = zCTR + 1 End If Next yCTR Next iCTR Range("AA11:AA" & zCTR).Select Selection.Sort Key1:=Range("AA11"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal End Sub
I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X | +------+------+------+---> | | 1999 | 2000 | 2001 | +------+------+------+------+---> | Jan | $100 | $250 | $300 | +------+------+------+------+---> | Feb | $200 | $300 | $200 | +------+------+------+------+---> | Mar | $300 | $250 | $100 | +------+------+------+------+---> | Sum | $600 | $800 | $600 | | +------+------+------+--->
| ID Y | +------+------+------+---> | | 1999 | 2000 | 2001 | +------+------+------+------+---> | Jan | $100 | $250 | $300 | +------+------+------+------+---> | Feb | $200 | $300 | $200 | +------+------+------+------+---> | Mar | $300 | $250 | $100 | +------+------+------+------+---> | Sum | $600 | $800 | $600 | | +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria: >= First Day of the Month <= Last Day of the Month = ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
I am trying to create a basic order history in excel from orders generated on our limited ERP system. I have exported the data required and imported to excel, but due to the export limitations, I can only export certain fields at a time. This means that I have to create three sheets for all the data I require.
The first sheet has the bulk of the data and is now nicely collumned. However, I cannot get both the customer code and full customer name on the same sheet due to the aforementioned limitations. Sheet 1 has customer code and other data, sheet 2 has customer code plus full customer name.
I have created a collumn for the customer name on sheet 1 (A3) next to the customer code (A2)
Basically, what I am trying to get it to do is as follows: In "A3" I need to create a formula that states that if A2 contains a certain customer code, then look in sheet 2, match the code and place the full customer name for that code. Bearing in mind that we have over 395 customer codes in use, so asking for a specific code to lookup would be as time consuming as entering the codes manually.
I have previously used an Excel file - created by someone else - which had pre-entered data. It was set up in such a way that if I typed a person's ID number into a cell, their name popped into the following cell. I know that the names and IDs were pre-entered somewhere else - in another sheet? In a file linked some other way?
What is this called? How do I do it? I want to end up with a file where I can type a department code into one column and have the department NAME pop up in the following column. I am mostly doing this as a time- saving measure when completing long lists of supplies being distributed to different departments (long story.) If anyone can even tell me what this is called, so I can look it up correctly, that would be... sublime.
I'm trying to create a table with drop down options for each cell (a different set of options for each column). Normally I'd use data validation, but I need to use Excel Services with this document, and that doesn't support data validation. I've seen mentions of using pivot tables to accomplish the same thing, but I can't find an example that works for my situation. I have eight or so column headers, and need a fairly large number of rows, all with the dropdown option. Is there a way to do this?
I need to create a "purchasing programme sheet from extracted data in a different workbook.
In short I need to open the Allocation, Add stock qauntities to the the boxes with a quantity in it and if its a zero i need (Once the button has been pressed) the information to be extracted to the corresponding boxes in the Purchasing Programme Document: Description, Part Number and quantity.
Found several items close to this, but not exactly (at least that I could find). It's difficult to type what I need to do, but here it goes.
I have two sheets. Sheet1 has data that I want to look at in range A1:B7; Sheet2 has column titles waiting on data from Sheet1. If one of the column titles on Sheet2 is "Mike," I need to look for all "Mikes" from A1:B7 and pull the data automatically onto the other sheet. I apologize if confusing, but I tried as best I could to describe it. I have attached a small file for guidance. Using the attached file, take "Mike" for example. Under his name on Sheet 2, cell A2 would display 300, then cell A3 would display 1,000.
I have a list of names that I'm looking up, and I want to list the data relevant to each name in a seperate place using a VLOOKUP ,(maybe theres a better way to do it) but some of the names appear more than once, resulting in an error.
I have on the first sheet, Name, Customer, Amount and Variance.
On the seperate sheet (in the same workbook) I have then name with 4 VLOOKUPS underneath, trying to extract the data Customer, Amount and Variance. But, I get errors in all of them.
Is there anyway I can List all the data relevant to each name using a Lookup function or is there another formula I should be using?
I am working on a workbook in which I extract data from a SQL database into a sheet with more or less the following format:
ID_Company ID_Level ID_XX
[Code].....
The aim is to extract a list of any employee that has been tagged as "NEW" in the last column, with his/her detail as per the column headings - and place the resulting list in another sheet. The extract is done dynamically and varies from month to month. So in other words the column headings 2013.MAY and 2013.JUN will change next month to 2013.JUN and 2013.JUL respectively - and so would the detail of the data below them as well. The "NEW" tag is simply assigned through an IF statement.
I had a look at most of the Excel Magic trick video clips on YouTube and managed to get a data extract from my main data sheet - BUT was only able to do the extract on the SAME sheet and NOT onto another sheet in the same workbook.
I am trying to export a range of data from excel to xml. I have a module that puts the range of data into one cell:
Code:
Function Concat(myRng As Range) Dim myStr As String Dim c As Range myStr = "" For Each c In myRng If c.Value "" Then myStr = myStr & ", " & Chr(34) & c.Value & Chr(34) Next Concat = Mid(myStr, 2, 9999) End Function
How to all data to come in with one decimal place (eg. "4.5","5.0",7.0")
Firstly, I have attached a file called test2 which has two sheets within it, one called list and one called 12345. This is for demonstration purposes only as in real life these are both separate files.
What I am trying to do is create a history in the file called list that extracts certain data from the file called 12345 and places it in a more user friendly format. No problems with the formulas etc, just a case of a few ifs and buts.
My real problem lies in the fact that file 12345 is only one of hundreds of files and in order to create the history, I have to repeat the process on all the other files, so that the list grows as I copy the data. Again for demo purposes, the file "list" sits in the C root ie C:list and the job files sit in C:files*.*.
Is there a way to automate the process so that formulas or VBA residing in the file "list" searches through the C:files*.* and populates the list as it runs through them.
Let`s assume that I have numerous "Serial Number" in "Sheet1" : http://i40.tinypic.com/2iqbspt.jpg
Now I want to create some cards in "Sheet2" that each card have a serial number that related serial number there is in "Sheet1" : http://i43.tinypic.com/34fz690.jpg. Need easy solution for doing it while when I drag one card to copying it then related serial number in sheet1 would be appear in required field. I mean first card has first serial number of sheet1 and second card has second serial number of sheet 1 ; but I want to doing it quickly with dragging.
I have a RAW DATA work sheet that has data of electricity consumption for a given week but it is in a vrtical table.
I have many other work work sheets in the workbook that I require to look at the RAW data and the return the correct information in the specified cells
I need the store number that is in cell F1 of each sheet and the Date on each sheet that are on Row4 of each sheet to Look up and match the information in ROW1 for the store number and columnA for the dates.
then in columnB of RAW DATA I have time intervals of 30mins which need to match up with the time intervals on the sheets and display the readings from the RAW data on the sheets.
******** ******************** src="http://www.interq.or.jp/sun/puremis/...<CENTER><TABLE cellSpacing=0 cellPadding=0 align=center>Microsoft Excel - Energy Analysis WE15-03-09.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA2A3A4A5A6A7A8=ABCDEFGHIJKLMNO1Reading DateReading Time8912116617118519682296710191119125612571292209/03/200900:0012.5926.74929.69668.728.6487.526.5616.2312.6416.3818.08317.02719.569309/03/200900:3011.8467.211.49610.1245.8726.821.817.9811.3216.711.96214.65619.243409/03/200901:0010.7368.11211.19811.286.27.415.2330.3412.0416.269.5527.26429.02509/03/200901:3010.78767.612810.68510.40725.6966.814.888.936.8416.618.53448.72645.4432609/03/200902:0011.0727.235213.01310.3235.9288.814.757.875.9218.059.38247.09445.3136709/03/200902:3011.2996.819210.26210.1765.70410.414.758.135.0916.489.0566.88325.1984809/03/200903:0011.8116.18248.952411.3695.88.314.697.774.9916.87.20964.71046.2496RAW DATA [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
the traditional count if statement doesnt return what I need. I have an array of values that need to be checked.
Column: A B C D E Data: .25 .49 .18 (Criteria 1 Result) (Criteria 2 Result)
What I need to do is check the data for the following conditions and if it meets the crirteria I need excel to place a 1 in column D or E.
Criteria 1 If any of the coulmn data contains a value less than .5 I need a 1 placed in column D
Criteria 2 If any of the column data contains a value greater than .5 but less than 1.0, I need a 1 placed in Column E. I tried using an IF/ Count If statement, but cant seem to get it to return the result I need.
I hold some data in the Excel 2007 file. It's about 400 rows and about 10 columns. On occasion I have to print some values from this file. But it has to be in defined position on the paper. It is like I already have the prepared paper with fields, and I just have to fill some fields on the paper with data from the columns. Is it possible to make a program that will take each row that I label for printing, and print just some columns but in a defined position on the paper ?
I need macro that will check for list of duplicates in sheet1 and place the duplicate data in sheet2. I know how to check duplicates in only one column.But now my sheet having lot of columns.
in excel, is there a place called data analysis under tools? im an exchange student in sweden andthe work that teacher gave me is half swedish and half english.. im looking for histogram there.
