I NEED A MACRO THAT CAN SORT SPREAD SHEET ALPHABATICALLY AND BY DATE BY CLICKING ON THE RELEVANT BUTTON BUT I DO'NT KNOW THE SYNTAX AND FORMULA FOR SORTING. IF SOME ONE GIVE ME A FAVOUR AND HELP ME IN HAVING THE RIGHT MACRO.
View 5 Replies
I have Column A where user inputs data. Whenever a user enters a new value in Column A, I need to copy that data into Column B and then sort the whole column. Any suggestions on how to do this using a macro?
View 9 Replies View RelatedI am a mechanical engineer by trade and am working in Excel to manipulate data. I have written macros in the past, but have come to a stumbling block. For simplicity say I have a column of timing information such as:
Time Sequence
1
9
15
23
Then I have another column of sequential time:
Time actual
0
1
2
3
4
5
etc.
I want to be able to take the first two values of the first column, search the second solumn for any values between those numbers, then create a new spreadsheet and copy those rows to a new spreadsheet, then loop back to search for the next two sets of numbers. So I want to search my actual time for values between 1 and 9 and put them all in a new sheet, then search for values between 9 and 15 and put those in another new sheet, etc.
I have two columns, left is called OD right is called ID. In each OD there are multiple ID's but this is shown for example as:
OD-----------ID
254000----0
254000----127000
285750----0
285750----127000
285750----158750
304800----0
304800----127000
Therefore, showing duplicates for the OD. The required format is:
254000---0---127000
285750---0---127000---158750
304800---0---127000
This shows each OD in the first column (no duplicates) and the corresponding ID's in the columns on the right. The example is done with small amount of numbers however, the data I am working with consists of thousands of rows therefore is not practical to do by hand. Please see attached spread sheet for example template with both unsorted and sorted data shown.
I attempted to do this by using the following code:
[Code] .....
Attached File : testing.xlsx
I used the macros found at http://www.contextures.com/xlSort02.html to sort columns. This solution works fine, the invisible rectangle is really good to my interests. Here's how it works: macro #1 creates invisible rectangles at the top of the columns used, at row 1 where the headers are, and assigns a second macro to the rectangles. This second macro sorts the data table based on the column whose rectangle is clicked. The problem is that this solution is for data tables, it sorts the entire table and I want to sort the one, single and only column where I click the invisible rectangle.
View 2 Replies View RelatedCreated the following macro, but doesn't seem to work.
Sub SortTable()
With Range("TC_Table")
.Sort key1:=Range("TC_Table").Cells(1, 1), Order1:=xlAscending
.Sort key2:=Range("TC_Table").Cells(1, 2), Order2:=xlAscending
.Header = xlYes
[Code] .....
I have a sheet with over a thousand part numbers (lines of data) whereby they are uniquely colored.
I am looking for code to allow the Macro to Sort the lines by the color of the line, identical to the Excel provided function. However, in that one- it is tedious to add the levels for the multiple Colors going on and I would like the Macro to perform it all at once.
So, I have five unique colors (Maybe doesn't matter)that remain constant: Red-Color Index:3, Yellow-color Index:6, Lime-Color Index:43, Gold-Color Index:44, and Gray-50%- Color Index:16? (I think).
So- when I run the Macro I would like it to Sort the data and group all the Colored lines (Parts) in series (doesn't matter the color order). In other words if there are 50 part numbers red and 100 part numbers Lime then Rows 1-50 are all the Filtered Red parts and Rows 51-150 are all the Lime and so on for all the other Colors.
I am trying to find a way to sort this info by column D but within the Groups shown. So, I want to sort rows 5 to 13, then rows 15 to 19 and then rows 21 to 29.
However I need to a macro to do this because the figures are updated weekly and the order will change. Furthermore, there could be new depts added when the figures are updated, so the row numbers may also change....
I regularly get a sheet that contains about 20 columns. I need to delete about 14 of them, and re-order the columns to a fixed order.
The columns always have the same headers, but are ofter in different positions (so I cannot hardcode the column location).
I have tried using the following, but fail on trying to use the result of the find in the selection afterwards.
I also do not know how to loop this through a list of column names (as I said, the input always has the same column names, and I always have to delete the same columns, and sort the remaining).
Sub Sort_My_Columns()
Cells.Find(What:="name1", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
myRow = ActiveCell.Row
MyCol = ActiveCell.Column
Columns("myRow:myRow").Select
Selection.Cut
Columns("A:A").Select
Selection.Insert Shift:=xlToRight
Range("A1").Select
End Sub
here i have results from a race. the racers have numbers in the format of a20,c51 etc
then the name of the competitor and car make model.
then some times that they run. in the format of 11.80 secs the following times have either thousands or hundredthousths of a second which i only want to comma seperate the 2 decimals before and after so a 12.3456 will be ,12.34,ignoring the 56 then the next result and so on.
so i want to comma seperate the a20,andrewspeck,vauxhalltigra,11.27,13.36,12.87,12.91 etc etc
now the name and vehicle will cause huge sorting head ache so leave those together i can seperate them manually.
.
A7,Andrew Speck,Vauxhall Tigra,11.27,13.36116,12.87113,12.91124,12.14134,11.37129,11.27128
2A4Iain BurtVauxhall Astra11.8012.1011311.8811411.8211511.80120
A2Chris SuttonVauxhall Corsa11.9514.1911413.8811212.4612412.1511511.9511814.08112
A17Andy NichollsRover 200 Turbo12.0812.0811612.8211712.50119
1A4Iain BurtVauxhall Astra12.0812.0811212.5812312.4611612.5311712.2910512.18111
A4Iain BurtVauxhall Astra12.1313.5811512.6111712.1811012.4811512.1311112.29113
1A8Gareth BirchVauxhall Nova12.1412.1411612.769912.18119
A8Gareth BirchVauxhall Nova12.1912.9811412.3811012.4111513.009612.4611212.19114
1A7Andrew SpeckVauxhall Tigra12.2612.26131
A10Errol HuellHonda CRX Turbo12.3613.3211513.2912315.726912.3610822.3652
1A14Westan FrickerFiat Coupe Turbo12.7812.78110
A14Westan FrickerFiat Coupe Turbo12.8414.8411513.7411413.4011513.3011513.0511312.84109
I'm having an issue where I have a macro (see attached file) that is supposed to auto-fill and sort. Twhen it tries to run the auto-fill on a sheet in its blank/template state. It will take my formulas in columns AC:AZ and fill them up to the header row.
[Code]....
This code was hobbled together using record macro and my minor understanding of coding.
(CK) Macro issue.xlsm
In column A I have alpha-numeric data similar to:
2
A1
3
A20
A186
B4
B13
1
C5
C3
And I need to sort them so that they are like:
1
2
3
A1
A20
A186
B4
B13
C3
C5
With the numbers first, in ascending order. Then the letters, grouped by letter ascending, and the number following them. But I can't have it where it looks at the first number after the letter (A1,A186,A20). It has to look at the WHOLE number and then sort it.
I'm using the excel built in function to sort columns with my macro. However since my columns have 64,000 entries it takes a while for the computer to sort it.
View 14 Replies View RelatedIn column A I have alpha-numeric data similar to:
2
A1
3
A20
A186
B4
B13
1
C5
C3
And I need to sort them so that they are like:
1
2
3
A1
A20
A186
B4
B13
C3
C5
With the numbers first, in ascending order. Then the letters, grouped by letter ascending, and the number following them. But I can't have it where it looks at the first number after the letter (A1,A186,A20). It has to look at the WHOLE number and then sort it.
I need a macro that will take a list of 42 names and 27 locations. The names are broken down into group of shifts, 1 shift, 2nd shift and 3rd shift. We need to perform audits on the 27 locations in groups of 2 people at a time. What I'd like is a macro that would take all the names by shift and assign 2 random people to a location. All 27 locations have to be audited each week (safety), and a report filled out and turned into our safety committee. I would like to post the audit sheet with the macro on our shared drive. Can anyone help me with this.
View 9 Replies View RelatedI have a table of 5 columns (each of 50 length) that is automatically refreshed (i am getting the data from web)after an interval of 5 minutes. I want the first column to be sorted alphabetically after every 'refresh' command, that has been executed by the excel. i have tried recording the macro and then running it on keystroke of 'ctrl + m'...the table surely gets sorted out but i can't be pressing ctrl+m every 5 minutes. auto-sort that is required to be executed after the auto refresh command..
View 6 Replies View RelatedI am putting together multiple worksheets with dumped data that should sort themselves by the press of a button. Each entry has a 'code' and a value and they are sorted by the 'code'.
At the moment i have the first worksheet sorting correctly and i am trying to program the second worksheet to sort data into the existing worksheets if they exist or create a new worksheet if the data doesn't have it's own worksheet.
Here is the code i am working with.
I'm using macros to apply some complex sorting criteria. It is also applying some cell formatting specific to the sort criteria being applied.
At the start of each macro, I'm resetting all cell formatting to remove any formerly applied formatting that is not correct for the new sort criteria. Basic stuff.... works fine.
Now I need to ensure all formatting created by any macro-generated sort gets removed if a user applies a sort using any sort function from the Ribbon. (Reset all formatting prior to any 'manually applied' sort).
I can create the macro to reset the formatting, just not sure how to trigger it upon user action.
Is it possible to trigger a short macro to reset cell formatting when a user applies a sort using the Data>Sort, Data>Sort Ascending, or Data>Sort Descending commands from the Ribbon?
I recorded a simple Macro in Excel 2010 to sort data by the first Column, heading "Ref". I have assigned CTRL + e as the keyboard shortcut for this.
My sheet contains a number of hidden rows (as I hide rows when I have finished working on that issue).
When I run the macro, it does sort by the number of Column A, but also, the hidden rows are then shown again.
I realise I could just click on the A-Z sort button to stop this happening, but I really like being able to use keyboard shortcuts, which is why I tried the macro route.
I wondered if it is possible for the macro to ignore hidden rows?
Code:
This is the macro:
Sub SortByRef()
'
' SortByRef Macro
'
' Keyboard Shortcut: Ctrl+Shift+E
[Code]....
I have a very big Excel file (62 MB). I need to be able to filter by one column (FACILITY) and sort the whole file using the (REGISTRATION NO) column as well as finding the missing sequence number in the (REGISTRATION NO) column. The problem is that the (FACILITY) column has more than 200 different facility name. I am thinking of macro as I have different Spreadsheet I need to do the same steps in each one separately.
I have attached a copy (example from the data that I have) .
I am trying to create a "Master Sheet" where I enter in the column data and after I have entered my data for each row, I can select the button which toggles the macro to run. I have it built to build new sheets as new clients are obtained. My problem is after I have a sheet that has client's data I cannot get new data to add itself below the data that is already there. I want each client's sheet to keep adding rows as more data comes in. My current macro is :
[Code] .....
Attached File : Data Entry Macro.xlsx
how to create the database and the resulting Pivot Table. My Sales Database includes the Sales $ and GP$ for each line. In the Pivot Table I've managed to create a calculated field for GP %, no problem.
i have also managed to figure out how to express each Row as a % of the Pivot Total, also very easy.
What I need to know is how can I sort my Pivot Table High to Low using these calculated fields?
I don't understand all of it, but I observed that it works only with mp3 with tag id v1, not v2, anyway I also see another code for tag id v2 given by NateO.
But before entering in detail of what I want, is it possible to edit tag id v1 or even v2, with VBA? Because I want to complete my mp3 informations that are missing, or modify the wrong one, in excel, and then with a macro update my mp3 files...
I've found this code on the forum to get my mp3 informations :
Option Explicit
Public Type mp3Info
Header As String * 3
Title As String * 30
Artist As String * 30
Album As String * 30
Year As String * 4
Comment As String * 30
Genre As Byte
End Type
Sub Getmp3Info()
Dim mp3ID As mp3Info
Dim lngRow As Long, lngFile As Long
Dim lngFileCnt As Long
With Application.FileSearch
.NewSearch
.Filename = "*.MP3"
.LookIn = "H:Daniel" 'Change this to the folder you wish to search
.SearchSubFolders = True........................
I have a sheet with fixed number of rows but variable number of columns. I have to sort this sheet on the basis of column A starting A2. i am using the following code
Range("A1", Range("A1").End(xlToRight).End(xlDown)).Select
Selection.Sort Key1:=Range("A2"), Order1:=xlAscending, Header:=xlYes
But it does not sort properly. To illustrate, i have 10 rows, some 4 columns wide and some 5 columns wide. Since the first row is 5 columns wide , all the rows with 5 columns populated get sorted but the rest get left out.
This is an example of what is being worked on:
(There are 500+ more lines like the ones below, in groups of approximately 17 lines per page of information.)
* C.B.A. Bank - 2nd reference to branch near Mike's store. (21/03/1956)
* Berwick exams results. (06/06/1877)
* Berwick exams (09/05/1877)
* Steps taken for erection of Berwick. (11/07/1874)
* Berwick tenders for work at home. (11/07/1877)
* W. was a storekeeper at Berwick. (25/07/1881)
* Berwick Brass. (27/06/1877)
* Commercial erected for son. (27/06/1878)
I need to do the folowing to it:
(not necessarily in the following order)
- Insert into Excel
- Remove brackets
- Sort chronologically
- Copy back into program I am using again, in same chronological order.
The desired outcome is to be able to throw into Excel all the lines and press a button, (possibly the Sort Ascending one) and have a chronological list of all entries.
I have a table which holds scores as well as other data for players. Is it possible to automatically sort a table based on their points score to see who is top of the league?
View 9 Replies View RelatedIs there a code or some way for me to sort 4 columns together? I want to sort a list of employees and for each employee theres a column with their Lost Business, customer satisfaction, and two more columns. I want to sort all the columns at the same time so that the best employees overall will go to the top of the list and the worst ones will be at the bottom. Whenever I use the sorting feature it does each column independant of the others so everytime I sort a new column it just moves around the last one I sorted.
View 14 Replies View RelatedI have five columns of data A to E. In each row there can be data in either 2 3,4 or 5 of the columns. What I want to do is essentially condense the data. So in columns, say, G,H,I J,K if there is data in column A then It goes into column g, if not it asks if there is any data in column b and so on. Then for H it does the same but one on. I have attached an example to show what I would like to happen.
View 9 Replies View RelatedI created a data base that had a hyperlink to a plan of the store so we can find parts easy. With a lot of help for people here on this web site, it works very well.
My only problem now is that I sorted my Database by the hyperlink column. It made it easy to do one hyperlink and pull the fill handle down for the rest of the same hyperlink reference.
When I went to resort the database so that the parts were in alphabetical order. The sort worked well except that the hyperlink for lets say cell F87 was not sorted. Example : - F87 hyper link presort had the reference to Rack 10 self B. Post sort it had the reference to Rack 16 shelf C. But when clicked on it still took you to Rack 10 self B.
I'm trying to sort this spread sheet so that each email address will have its own column assigned to it. Ie jaz@hello.com will alway be column C and harry@hello.com will always be in D. The problem is I've around 1200 rows of infor and the email addresses are all over the place..
View 5 Replies View Related
