Sorting Multiple Customers In A Single Cell

Aug 18, 2006

I am trying to figure out how I can sort multiple customers in a single cell, and then assign the customers to the outside salesman. The basic idea is in column A I have the customers for a specific job. Assume I have three customers (Alpha, Omega & Gamma) and they are all in ONE cell. I need to sort this and assign each customer to each of my outside salesmen (Bob, Ted, Fred) in another column. The other component to this question is that Bob, Ted & Fred may have MORE than one customer in that single cell........

View 5 Replies


ADVERTISEMENT

Extract Top 10 Customers From Single Pivot Table?

Jun 13, 2013

I have come across a situation where I am listing the top 10 customers based on their sales. I have a worksheet for each product I sell. I'm wondering if there is a way to write an excel formula to pull just the top 10 customers from just a single pivot table (respective to the product worksheet) instead of having to create a new pivot for every product and sort based on top 10 and then link to my spreadsheets?

View 2 Replies View Related

Multiple Row, Single Column Cell Blocks Into Single Row, Multiple Column Format

Mar 21, 2008

I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...

View 9 Replies View Related

Lookup Multiple Values In A Single Cell (separated By Commas) And Then Return The Values To A Single Cell (also Comma Separated)

Jan 7, 2009

If I have, in one cell (call it D1):

EH,DR,HU

and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E

I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...

eg...

F,G,H

View 9 Replies View Related

Pull Data From Multiple Cells And Concatenate In Single Cell Using Multiple Criteria

Aug 31, 2012

I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:

TABLE 1:

Project
Benefit Type
Delivered or Enabled
Benefit

PJ1
Financial
Delivered
Saving of $4M over 24 months.

[code]....

I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.

TABLE 2:

Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled

[code]....

So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:

Continued maintenance of hardware.

Increased capacity.

View 1 Replies View Related

Splitting Multiple Entries In Single Cell Into Multiple Columns

Jan 15, 2013

I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows

Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID

Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3

How I could achieve this as I have a number of projects where this would become useful

I know you can use delimiters but with spaces between the values I just can't fathom a way forward.

View 12 Replies View Related

Multiple Cell Sorting

Jul 9, 2008

I have a multiple Excel sort option question and I hope that someone can answer it. I have multiple rows and I want to sort rows together that match(text or value) in 3 different columns. If there is not a match, I would like Excel to delete the row. I have over 160,000 items and probably only 20,000 match and this is why it would be such a pain to do this manually.

View 9 Replies View Related

Sorting A Single Column

Nov 30, 2008

This is a simple question but I have been playing around with the syntax(unsuccesssfully) for a while. I want to do is sort a column (not the whole sheet). the column selection being determined by the activecell. I know I can use

View 5 Replies View Related

Macro For Sorting A Single Column

Feb 16, 2009

I used the macros found at http://www.contextures.com/xlSort02.html to sort columns. This solution works fine, the invisible rectangle is really good to my interests. Here's how it works: macro #1 creates invisible rectangles at the top of the columns used, at row 1 where the headers are, and assigns a second macro to the rectangles. This second macro sorts the data table based on the column whose rectangle is clicked. The problem is that this solution is for data tables, it sorts the entire table and I want to sort the one, single and only column where I click the invisible rectangle.

View 2 Replies View Related

V Lookup Or Hlook Up: Look Up The Cell Reference For Distance Between Two Customers

May 22, 2006

I have attached a spreadsheet with a small amount of the data I need to use. This is the distance between customers in kms. I need to be able to have excel look up the cell reference for distance between two customers though they will not always be the same customers every day in the same order.

View 2 Replies View Related

All Information In One Cell Instead Of Multiple Cells - Sorting Dataset

Oct 17, 2013

I downloaded a massive dataset in .csv format to work with. My first problem is that I'm having trouble sorting the dataset. When I open the .csv-file every bit of information comes up in the A-column instead of having INFORMATION1 in the A-column INFORMATION2 in the B-column and so on.

View 1 Replies View Related

Find Multiple Instances Of Single Criterion In Row & Return To A Single Col

May 8, 2006

Find Multiple instances of Numeric Criterion in Row & Return To a Single
Column.

I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows.
Each Row may contain duplicates of the Numeric Criterion.

I would like to find ALL instances of a specific Numeric Criterion across
each single Row in the Dynamic Range "Data" and have the Results returned to
a New Sheet in a single column.

NEW Sheet:
The Numeric Criterion is housed in G5.
The matched criterion should be returned to the New Sheet starting at G7.
Duplicate instances in the same Row should ALL be returned to the same cell
in Column G on the New Sheet.

Sample Data Layout:
Columns I J K L M N O P Q R
Row No.76 1 0 1 1 0 1 1 1 0 1
Row No.77 2 2 3 2 1 2 2 0 0 0
Row No.78 3 3 3 3 3 0 3 0 3 0

Scenario:
Looking for Numeric Criterion 1 (one).

Expected Results - New Sheet:
Row No.7 Column G (Cell G7) 1111111
Row No.8 Column G (Cell G8) 1

In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be
returned to the same cell G7.
In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it
should be returned to cell G8.

View 14 Replies View Related

Multiple Lookups In Single Cell

Jun 13, 2014

I am looking for creating a dynamic meeting log/calendar for my team. There's a couple of elements to my questions below:

I have a log with columns such as "Meeting Date", "Client", "Attendee" and have also set up month calendars on separate tabs which automatically update the dates according to a "Year" toggle using Janoffset, Feboffset, etc.

What I would like to do is have these calendars automatically populate a cell beneath each date with any meetings on that day. The client name and then a space then the attendee in brackets would be sufficient and with each meeting having its own line in the cell).

I have gotten a Vlookup working but have run into two snags: 1) where there is more than one meeting on a single day 2) I can only return one piece of information in the cell or otherwise have it blank, I can't have the client name AND attendee.

Is there any way to lookup all of that information in the one cell or is this just a pipe dream?

I have attached my workbook which contains my workings so far and in the first cell of Jan shown the "ideal" format. I'd like the data in.

View 14 Replies View Related

If Then Multiple Arguments For Single Cell

Nov 14, 2008

IM getting a too many arguments error on this ...

View 8 Replies View Related

Multiple IF Statement For Single Cell

Aug 15, 2012

The following IF statement isnt working, so im missing something. If A2 says YES, i want the cell with this statement to be blank. However, if A2 has a date, I want this cell to be that date + 45 days. How can I make this correct?

=IF(A2="","",A2+45,IF(A2=yes,""))

View 8 Replies View Related

Single Cell With Multiple Hyperlinks

Jun 16, 2013

Any way to have multiple hyperlinks to various files in one cel?

I want to the hyperlink to change based upon information entered in which i want it to copy an address from another sheet using the VLookup command.

View 3 Replies View Related

Finding Single Name In Cell In Cell With Multiple Names (words)

May 8, 2014

Looking for a formula (not macro) that can do the following:

I have a spreadsheet and in one column, it has last names of clients. In the next column, it has full names of clients that are the same account, but different system with different descriptions for the name. I need to lookup the column that just has last name and see if that last name exist anywhere in the "Full name" column. If it does, then I need column C to say "Yes" or something along those lines.

The "full name" column isn't always in the same format and sometimes doesn't even contain the "last name." Sometimes the last name will be first and sometimes there's a comma and sometimes there isn't a comma. The spreadsheet attached shows a good short example of what I'm working with...

Name Spreadsheet Ex.xlsx

View 2 Replies View Related

Format Multiple Cell Values Displayed In Single Cell?

May 24, 2012

I have the following data on a spreadsheet created by a formula:

A1: 1.1234
A2. 2.234
A3: 3.34

I have the data formatted to only have two decimal places so it looks like this:

A1: 1.12
A2: 2.23
A3: 3.34

I'm using the following formula in cell B1 to display the values of those cells in a single cell in order A1,A2,A3:

=A1 & "," & A2 & "," & A3

However when the values of A1, A2 and A3 appear in the in cell B1 they appear as: 1.1234,2.234,3.34

Is there a way I can edit the formula or format something so the values in B1 appear as with only two decimal places? i.e 1.12,2.23,3.34

View 3 Replies View Related

Multiple Selections From Listbox To A Single Cell?

Aug 9, 2013

how do I save multiple items selected from a userform listbox to a single cell on a worksheets? How do I have those values display in a listbox on a userform for editing data sets?

View 2 Replies View Related

Add Multiple SUMIFS Into A Single Cell / Function?

Jun 30, 2014

In a workbook I have a tab with multiple columns containing names, activity codes, billed hours, etc. On another tab I have created a budget for which I use the Excel SUMIFS function to check the database in the first tab for relevant entries and add them together in the budget sheet.

Now here's for the tricky part. On the budget sheet the names are not mentioned, only the job titles. So these are grouped together. This means that the first tab shows only names, while the budget tab only shows the function title.

The function I have used thus far is this:

Formula: [Code] ......

The first part refers to the column containing the billed hours, the second part refers to the column containing the names (criteria range 1), the third part refers to a specific name (criteria 1), the fourth part refers to the column containing the activity codes (criteria range 2), while the fifth part refers to a specific activity code (criteria 2).

This works really well as long as the budget tab only mentions the names, yet it only aggegates at the job title level. Would it be possible to use the same SUMIFS function to search the database for, say, all the names that fall within one specific job title? Essentially that would result in this somewhat bulky function:

Formula: [Code] .....

Clearly, Excel doesn't allow this.

View 9 Replies View Related

Checking Single Cell For Multiple Values

Nov 12, 2013

I'm trying to validate the data entered into a series of cells each cell can contain a different set of data but the value N/A is also permitted. For example:

Cell A1 could contain a date from 2013-01-01 thru 2013-12-01 but the value N/A is also valid
Cell A2 could contain a decimal from 0.01 thru 302502.23 but the value N/A is also valid
Cell A3 could contain an integer from 3 thru to 9000 but the value N/A is also valid

When the acceptable values are entered then I want to be able to carry on otherwise I want to pop up with an error.

View 10 Replies View Related

Multiple Stage Multiplication In Single Cell

Dec 18, 2013

I have to maintain freight cost according to the shipment weight. Our shipper has different charges for different scale/quantity of shipment. For example, according to the attached picture; Rate for up to 10 Kilo is $ 20 per kilo. For weight more than 10 kilo and up to 20 kilo, Rate will be $ 15 per kilo and so on.

Now, suppose my shipment weight is 28 kilo. My cost will be $ 200 for 10 kg, $ 150 for next 10 kg and $ 80 for the last 8 kg. In total $ 430.

I have to calculate the total cost separately. I wonder if I could devise a formula by which I could put the weight in a single cell and get the freight cost instantly.

View 2 Replies View Related

Multiple Numerical Formats In A Single Cell?

Oct 7, 2008

In a single cell, I would like to show 2 values: a currency and a percentage. So A1 and A2 has values, say 50000 and .10 respectively (these are derived via formula, if it's of any relevance). What I ultimately want is "$50,000 and 10%". I've originally thought about adding the "$", " and ", and "%" separately, but I need the currency value to include commas.

View 2 Replies View Related

Sum Multiple Checkbox Values In Single Cell

Jul 1, 2014

I have an assigned value of 10 to each checkbox that is checked. If the checkbox is selected I want to automatically sum the totals in a cell on my active sheet. Checkboxes are activeX placed directly on a worksheet. I currently have a work around but considering the number of checkboxes I have, coding is going to be a nightmare as I would have to code each one separately. Right now I am summing each box on another sheet and linking the summed total back to active sheet.

[Code] ....

I would like to do all check boxes with one code and sum the total in the active sheet in cell "I7". The set of checkboxes is 1 to 26.

View 3 Replies View Related

Indentify Value From Multiple Values In A Single Cell

Dec 10, 2005

I am looking to produce a formula that shows if a number is "found" or "not
found".

I have list of over 1000 numbers in one column (1 number per row) . I am
trying to identify if those values are present in a range of numbers from
another worksheet(also in a single column). My challenge is that the range of
numbers that I am looking in has multiple values, separated by commas in a
single cell. Looks like it was from an Access data dump.

View 9 Replies View Related

Display Multiple Results In Single Cell?

Feb 25, 2012

I am using excel as a scheduling program. The sheet has days of the month across the top, and staff names down the column. We have 5 shifts D,A,B,C,N. I am using the following formula to display if shifts have been scheduled for the column

if(countifB10:N23,"N")=1,"X","N") i.e for the night shift. I then use conditional formatting to change the cell to green if the night shift has been scheduled, or red if it has not.

I would like to have the results of all 5 formulas display in a single cell, to save Real Estate, then have the cell go green when all shifts have been scheduled for the day (column).

Is this even possible?

View 3 Replies View Related

Linking Single Cell To Multiple Cells?

Sep 25, 2012

I have values on master sheet and want to link those values to source documents in the same workbook. But the values on master sheets are made up of more than one value on another sheet.

For example on master sheet I have $137,000 that is made up of values in P7 + Q7 + P57 + Q57 on source sheet. If user wants to see where this number is coming from; the user will click the number to go to source document.

On a single valve I linked to the source sheet to a single cell. One thing I was thinking, using conditional format, so if one of the cells is selected in source document the other cells that combine the total of the master sheet cells should be highlighted, just my 2 cents.

View 6 Replies View Related

Multiple Criteria On Autofilter From Single Cell

Mar 18, 2013

I'm trying to add to my code an autofiler with multiple criteria, the criteria is held in single cell. The criteria is made up of anything from 5 to 30 cells, then i have tried to concatenate these separated by commas, in speech marks, speech marks and commas etc., set them as an array the use that in my filter, but nothing seems to work.

View 6 Replies View Related

Sum Of Multiple Cells And Return It To One Single Cell

Nov 4, 2009

I'm trying to take the sum of multiple cells and return it to one single cell using the Vlookup

For Example I want to match the ID numbers from one spreadsheet and use the list of codes to return the value of the sum of all matched numbers. So in this example I would want the number 65 in one cell...

View 9 Replies View Related

Coply Multiple Lines Into Single Cell

Jul 6, 2004

I have a table in word that I'm trying to copy into excel.

The problem is one of the columns in the row in that table may have multiple lines with hard returns.

When I copy and paste into excel, the result gives me multiple lines. I want a single line, with the exact multiple text in a single cell. How can I do this?? Nobody in the world seems to know.

To try this set up a word table with a single row, 3 columns. In the 3rd column put the following value.

Value 1
Value 2
Value 3

Now copy the entire row and attempt to past into excel. Watch as it creates 3 rows.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved